Product Overview
The AireMax APE514H is a versatile portable air conditioner and heater designed to provide optimal climate control for rooms up to 500 square feet. This unit offers four operating modes: Cool, Fan, Heat, and Dry, ensuring comfort in various conditions. It features three fan speeds, auto-swing top louvers for even air distribution, and a dehumidification capacity of up to 78 pints per day.
Equipped with convenient rolling casters and integrated side handles, the APE514H is easy to move between rooms. The unit includes an adjustable mobile window installation kit suitable for both vertical and horizontal windows, simplifying setup without the need for professional installation.
Figure 1: Front view of the AireMax APE514H Portable Air Conditioner and Heater.
Key Features
- 4 Operating Modes: Cool, Fan, Heat, and Dry for comprehensive climate control.
- Efficient Dehumidification: Removes up to 78 pints of moisture per day.
- Portability: Features four rolling casters and side handles for easy movement.
- Easy Installation: Includes an adjustable window installation kit for quick setup.
- Dual Filtration System: Two washable filters capture pet hair, dust, and other particles, ensuring efficient operation and cleaner air.
- User-Friendly Controls: Soft-white LED display, top-mounted electronic controls, and a multifunction remote control for convenient operation.
Figure 2: Digital LED Display Panel with controls for Timer, Fan, Full indicator, Temperature Up/Down, Mode, and Power.
Setup and Installation
Unpacking
Carefully remove the unit from its packaging. Ensure all components are present:
- Portable Air Conditioner Unit
- Exhaust Window Installation Kit
- Remote Control (with batteries)
- User Manual (this document)
Placement
Place the unit on a flat, stable surface near a window. Ensure there is at least 20 inches of space around the unit for proper airflow.
Window Kit Installation
- Attach the exhaust hose to the unit's exhaust connector.
- Assemble the adjustable window panel. The kit is designed for both vertical and horizontal windows.
- Insert the window panel into the window opening and extend it to fit snugly.
- Connect the other end of the exhaust hose to the window panel. Ensure a tight seal to prevent air leakage.
Figure 3: Rear view of the unit showing the exhaust hose connection.
Figure 4: Side view illustrating the exhaust hose extended towards a window.
Operating Instructions
Control Panel and Remote Control
The unit can be operated using the top-mounted electronic control panel or the included remote control. The soft-white LED display shows the current settings.
Figure 5: Remote control for convenient operation.
Operating Modes
- Cool Mode: For cooling the room. Adjust temperature using the Up/Down buttons.
- Fan Mode: Circulates air without cooling. Select from 3 fan speeds (Low, Med, High).
- Heat Mode: For heating the room. Adjust temperature using the Up/Down buttons.
- Dry Mode (Dehumidify): Removes moisture from the air.
Timer Function
Set the 24-hour auto turn on/off timer to program the unit's operation according to your schedule.
Temperature Setting
The temperature can be set between 62.6°F (17°C) and 86°F (30°C).
Maintenance
Filter Cleaning
The unit is equipped with dual filters to prevent clogging and maintain efficiency. It is recommended to wash and dry the filters periodically.
- Turn off and unplug the unit before cleaning.
- Locate and remove the dual filter frames from the back of the unit.
- Wash the filters with warm, soapy water. Rinse thoroughly.
- Allow the filters to air dry completely before reinserting them into the unit.
Figure 6: Rear view highlighting the dual filter frames and exhaust connector.
Water Drainage
The unit features auto-evaporation for most conditions. However, in high humidity environments, the internal water tank may fill up, indicated by a "FULL" reminder on the LED display. When this occurs, the unit will stop operating until drained.
- Place a shallow pan or bucket under the drainage outlet at the bottom rear of the unit.
- Remove the drain plug to allow water to flow out.
- Replace the drain plug once the tank is empty.
Figure 7: Rear view showing the location of the drainage hoses.
Troubleshooting
If you encounter issues with your AireMax APE514H, please refer to the common problems and solutions below before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, power cord unplugged, circuit breaker tripped. | Ensure unit is plugged into a working outlet. Check circuit breaker. |
| Unit not cooling/heating effectively. | Dirty air filters, blocked air intake/exhaust, room size too large, windows/doors open. | Clean air filters. Ensure no obstructions. Close windows/doors. Verify unit capacity for room size. |
| "FULL" indicator is on. | Water tank is full. | Drain the water tank as per maintenance instructions. |
| Unit is noisy. | Unit not on a level surface, internal components vibrating. | Place unit on a flat, level surface. Check for loose parts. (Note: 60 dB is normal operating noise). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | APE514H |
| Product Dimensions (D x W x H) | 15.1" x 16.9" x 29.2" |
| Item Weight | 70 lbs |
| Cooling Capacity | 14,000 BTU |
| Cover Area | Up to 500 sq. ft. |
| Hose Size | 11" - 59" (adjustable) |
| Temperature Range | 62.6°F - 86°F (17°C - 30°C) |
| Voltage | 115V/60Hz |
| Noise Level | 60 dB |
| Dehumidifying Capacity | 78 pints/day |
| Drainage | Auto-evaporation or manual |
| Filter Type | Mesh (Dual) |
| Controls | Electronic with LED display, Remote Control |
Figure 8: Product dimensions (Depth, Width, Height).
Figure 9: Detailed technical parameters of the unit.
Figure 10: Guide to finding the correct cooling capacity for your room, including adjustments for specific conditions.
Warranty and Support
The AireMax APE514H Portable Air Conditioner and Heater comes with a 1-year warranty covering parts and labor from the date of purchase.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact AireMax customer support. Refer to the product packaging or the official AireMax website for the most current contact information.
Please have your model number (APE514H) and proof of purchase ready when contacting support.
