1. Introduction
This manual provides essential information for the safe and efficient use of your Yisheng Propane Gas Burner Ring. Designed for outdoor fire pits, fireplace bowls, and BBQ applications, this burner ring offers a convenient way to enjoy a gas flame. Please read this manual thoroughly before installation and operation.
Figure 1: Yisheng Propane Gas Burner Ring complete with hose and regulator.
2. Safety Information
WARNING: Failure to follow these safety guidelines may result in property damage, personal injury, or death.
- Keep a safe distance from all flammable materials.
- Use only the permitted fuel type: Liquid Petroleum Gas (Propane).
- Be constantly aware of fire hazards during operation.
- Ensure adequate ventilation when operating the burner.
- Do not move the burner while it is in operation or still hot.
- Store the burner and propane tank in a cool, dry, well-ventilated area when not in use.
- Always check for gas leaks before each use.
- Do not obstruct the flow of combustion and ventilation air.
- Never leave the burner unattended while in operation.
3. Product Features
- Material: Durable Metal construction, likely stainless steel for the ring.
- Fuel Type: Designed for Liquid Petroleum Gas (Propane).
- Application: Suitable for outdoor fire pits, fireplace bowls, BBQ, and camping.
- Design: Round burner ring for even flame distribution.
- Included Components: Typically includes the burner ring, hose, and regulator for connection to a propane tank.
4. Setup and Installation
Follow these steps for proper setup and installation of your gas burner ring:
- Unpack Components: Carefully remove all components from the packaging. Verify that all parts are present: burner ring, gas hose, regulator, and any connection fittings.
- Positioning: Place the burner ring in the desired location within your outdoor fire pit or fireplace bowl. Ensure it is level and stable.
- Connect Hose to Burner: Securely attach one end of the gas hose to the inlet connection on the burner ring. Use a wrench to tighten connections, but do not overtighten.
- Connect Regulator to Propane Tank: Attach the regulator end of the gas hose to your propane tank valve. Hand-tighten the connection.
- Leak Test: Before lighting, perform a leak test.
- Ensure all connections are tight.
- Open the propane tank valve slowly.
- Apply a soapy water solution to all gas connections.
- If bubbles appear, there is a leak. Close the propane tank valve immediately, tighten the connection, and re-test. Do not proceed until all leaks are resolved.
- Ventilation: Ensure the fire pit or enclosure allows for proper ventilation as per local codes and safety guidelines.
Figure 2: Individual components of the gas burner system, including the ring, hose, regulator, and valve key.
5. Operating Instructions
Always ensure the area is clear of flammable materials and that the leak test has been performed.
- Open Propane Tank Valve: Slowly open the valve on your propane tank counter-clockwise until fully open.
- Ignite Gas: Using a long lighter or match, position the flame near the burner ring.
- Open Gas Valve: Slowly turn the gas valve on the burner system (often controlled by a key valve) counter-clockwise to allow gas flow. The burner should ignite immediately.
- Adjust Flame: Adjust the gas valve to achieve the desired flame height.
- To Turn Off: First, close the gas valve on the burner system by turning it clockwise until fully closed. Then, close the valve on the propane tank.
Never leave the burner unattended while in operation.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your burner ring.
- Cleaning: Allow the burner to cool completely before cleaning. Use a soft cloth and mild soapy water to clean the exterior surfaces. Do not use abrasive cleaners.
- Burner Ports: Periodically inspect the burner ports for any obstructions (e.g., debris, insect nests). Use a small wire or compressed air to clear them if necessary.
- Hose and Connections: Regularly inspect the gas hose for cracks, cuts, or excessive wear. Check all connections for tightness. Replace any damaged components immediately.
- Storage: When not in use for extended periods, disconnect the propane tank and store the burner ring in a dry, protected area away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No flame or weak flame |
|
|
| Gas smell |
|
|
8. Specifications
Figure 3: Detailed dimensions of the burner ring and associated components.
| Attribute | Detail |
|---|---|
| Brand | Yisheng (also listed as oomvarmer) |
| Model Number | YS00-116 |
| Product Dimensions | 30.5 x 30.5 x 1.6 cm (Burner Ring); 31D x 21B x 20H cm (Overall product dimensions listed) |
| Weight | 2.8 kg |
| Material | Metal |
| Fuel Type | Liquid Petroleum Gas (Propane) |
| Shape | Round |
| Color | Orange (Note: This might refer to packaging or a specific component, as the burner itself is metallic.) |
| Country of Origin | China |
9. Warranty and Support
Specific warranty information for the Yisheng Propane Gas Burner Ring is not provided in this manual. For warranty claims, technical support, or replacement parts, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.
For general inquiries, you may refer to the seller's information on the product listing page or visit the manufacturer's official website if available.
