Simrad IP CAM-1 Marine Camera User Manual

1. Introduction

The Simrad IP CAM-1 is a robust marine camera designed to enhance vessel awareness and safety. This camera provides clear visual monitoring of areas onboard or in close proximity to your boat. Its durable construction and advanced features make it suitable for demanding marine environments.

This manual provides essential information for the proper installation, operation, and maintenance of your IP CAM-1 camera. Please read it thoroughly before using the product.

2. Product Features

Rugged 316 Stainless Steel Construction: Engineered to withstand harsh saltwater environments, ensuring longevity and reliability.
High-Resolution Imaging: Delivers clear visuals with a 1920 x 1080 resolution.
Night Vision Capability: Equipped with high-performance IR LEDs for operation in low-light conditions or complete darkness, offering a 10-meter range.
Wide-Angle Lens: Features a 1.8mm wide-angle lens to provide a broad field of view.
Flexible Power Options: Supports Power Over Ethernet (POE) for simplified wiring or a standard 12V power supply.
Seamless Integration: Preconfigured for compatible Simrad NSSevo3/3S, NSOevo3/3S, Lowrance HDS LIVE, B&G Zeus 3, and Zeus 3S chartplotters/fish finders.

3. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

Ensure all power connections are made correctly and securely to avoid electrical hazards.
Do not attempt to open or modify the camera housing, as this may compromise its waterproof integrity and void the warranty.
Mount the camera in a location where it will not obstruct navigation or create a tripping hazard.
Disconnect power before performing any maintenance or cleaning.
Consult a qualified marine electronics technician for complex installations or repairs.

4. Package Contents

Upon opening the package, verify that all components are present and undamaged:

Simrad IP CAM-1 Marine Camera
Mounting Hardware (screws, gaskets, etc. - typical for marine cameras)
Installation Template (if applicable)
Documentation (this user manual)

Note: Specific cable lengths and types may vary. Ensure you have appropriate Ethernet (for POE) or 12V power cables for your installation.

5. Setup and Installation

The IP CAM-1 is designed for straightforward installation. Follow these steps for optimal performance:

Choose a Mounting Location: Select a position that provides the desired field of view. The camera can be mounted rear-facing for use as a reverse camera or forward-facing for a view ahead of your vessel. Ensure the location is clear of obstructions and allows for proper cable routing.
Mount the Camera: Secure the camera using the provided mounting hardware. Ensure a watertight seal if mounting in an exposed area. The 316 stainless steel housing is designed for direct exposure to marine elements.
Power Connection:
- Power Over Ethernet (POE): If using POE, connect a compatible Ethernet cable from a POE-enabled network switch or injector directly to the camera's Ethernet port. This single cable will provide both power and data.
- 12V Power Supply: If not using POE, connect the camera to a stable 12V DC power source. Ensure correct polarity (positive to positive, negative to negative) to prevent damage.
Network Connection: Connect the camera to your vessel's network via an Ethernet cable. The camera is preconfigured for direct integration with compatible Simrad, Lowrance, and B&G chartplotters.
Initial Configuration (IP Address): After connecting, you may need to manually enter the camera's IP address on each compatible multifunction display (MFD) where you wish to view the camera feed. Refer to your MFD's user manual for specific instructions on adding IP cameras.

Simrad IP CAM-1 Marine Camera, front view showing the lens and stainless steel housing.

Figure 5.1: The compact, spherical design of the Simrad IP CAM-1 Marine Camera, highlighting its durable 316 stainless steel housing and the wide-angle lens. The camera is designed for marine environments.

6. Operation

Once installed and configured, the IP CAM-1 camera feed can be accessed through your compatible chartplotter or fish finder.

Accessing Camera Feed: Navigate to the camera input section on your Simrad, Lowrance, or B&G multifunction display. The camera feed should appear as an available source.
Multiple Cameras: If multiple IP CAM-1 cameras are installed on your network, you can typically cycle through their views directly from your MFD.
Night Vision: The camera automatically activates its IR LEDs in low-light conditions, providing clear black-and-white video up to 10 meters.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your IP CAM-1 camera.

Cleaning the Lens: Gently clean the camera lens with a soft, damp cloth to remove salt spray, dirt, or debris. Avoid abrasive cleaners or materials that could scratch the lens.
Housing Inspection: Periodically inspect the 316 stainless steel housing for any signs of corrosion or damage. While highly resistant, extreme conditions may require attention.
Cable Connections: Check all cable connections for tightness and signs of wear or corrosion. Ensure waterproof seals are intact.

8. Troubleshooting

If you encounter issues with your IP CAM-1 camera, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No camera feed on MFD	No power to camera Loose network cable Incorrect IP address configuration Incompatible MFD model	Check power supply (POE or 12V). Ensure Ethernet cable is securely connected. Verify IP address settings on your MFD. Note: This camera is not compatible with Lowrance HDS Gen 3 units.
Poor image quality	Dirty lens Insufficient lighting (if IR not active) Network interference	Clean the camera lens. Ensure IR LEDs are functioning in dark conditions. Check network cabling and connections for integrity.
Camera not recognized by network	Network configuration issue Faulty Ethernet cable	Verify network settings on your MFD and network switch. Test with a different Ethernet cable.

9. Technical Specifications

Model: IP CAM-1
Resolution: 1920 x 1080
Lens: 1.8mm wide-angle
Night Vision: High-performance IR LEDs (10m range)
Construction Material: 316 Stainless Steel
Power Options: Power Over Ethernet (POE) or 12V DC
Compatibility: Simrad NSSevo3/3S, NSOevo3/3S, Lowrance HDS LIVE, B&G Zeus 3, Zeus 3S (Not compatible with Lowrance HDS Gen 3)
Item Weight: Approximately 2 pounds (0.91 kg)
Package Dimensions: Approximately 8 x 6 x 6 inches (20.3 x 15.2 x 15.2 cm)
Manufacturer: Simrad

10. Warranty and Support

For warranty information and technical support, please refer to the official Simrad website or contact your authorized Simrad dealer. Keep your proof of purchase for warranty claims.

Online Resources: For the latest product information, software updates, and additional support resources, visit the Simrad Store or the official Simrad website.

	Simrad NSX Quick Start Guide: Setup, Features, and Operation Get started with your Simrad NSX multi-function display. This guide covers initial setup, quick access menu, apps, alerts, system settings, and more for efficient marine navigation.
	Simrad S2009-S2016 Fish Finder: Manuale di Istruzioni Ufficiali Guida completa al funzionamento, configurazione, installazione e manutenzione dei sistemi Simrad S2009 e S2016 Fish Finder. Scopri le funzionalità avanzate e le specifiche tecniche per la pesca e la navigazione marittima.
	Simrad I3007 Installation Guide This document provides installation guidance for the Simrad I3007, detailing technical specifications, connector information, grounding, and system examples.
	Simrad NSS evo3S Operator Manual - Comprehensive Marine Navigation Guide Explore the Simrad NSS evo3S Operator Manual for detailed insights into marine navigation, chartplotting, sonar, radar, autopilot, and system customization. Essential guide for boaters.
	Simrad WR10 Wireless Autopilot Controller and BT-1 Bluetooth Base Station Quick Reference Guide This Quick Reference Guide provides essential information for the Simrad WR10 Wireless Autopilot Controller and BT-1 Bluetooth Base Station, covering standard package contents, accessories, specifications, dimensional drawings, mounting instructions, pairing procedures, and operational details.
	Simrad NSO evo3S™ MPU Operator Manual Comprehensive operator manual for the Simrad NSO evo3S™ MPU system, detailing features, operation, and customization for advanced marine navigation, charting, radar, sonar, and autopilot control.

Simrad IP CAM-1