VANBAR 11-inch Mirror Dash Cam Front and Rear Camera User Manual

1. Introduction

Thank you for purchasing the VANBAR 11-inch Mirror Dash Cam. This device is designed to enhance driving safety by providing a wide field of view with both front and rear cameras, high-resolution recording, and smart features. Please read this manual carefully before installation and operation to ensure proper use and optimal performance.

2. Product Overview

2.1 Key Features

• 11-inch IPS LCD Touch Panel: Large, responsive display for easy control and clear viewing.
• 2.5K High Resolution Recording: Captures clear video footage from both front and rear cameras.
• Front and Rear Cameras: Simultaneous recording with a wide field of view.
• Voice Control: Hands-free operation for common functions.
• GPS Functionality: Records driving route and speed data.
• WDR (Wide Dynamic Range): Improves video clarity in varying light conditions.
• 24-hour Parking Monitoring: Automatically records events when parked.
• G-Sensor: Detects impacts and locks emergency video footage.
• Waterproof Rear Camera: IP68 rated for external vehicle mounting.
• LED Signal Light Support: Ensures proper recording of traffic signals.

2.2 Package Contents

Verify that all items listed below are included in your package:

• VANBAR 11-inch Mirror Dash Cam Unit
• Rear Camera (Waterproof)
• GPS Antenna
• Car Charger (Cigarette Lighter Adapter)
• Rear Camera Extension Cable
• Rubber Mounting Straps (2 sets)
• Anti-glare Film
• 32GB MicroSD Card
• User Manual
• Alcohol Cleaner & Cleaning Cloth
• Cable Management Tool (Interior Removal Tool)
• "Recording in Progress" Sticker

Figure 2.2: Included Accessories

2.3 Display Technologies

Figure 2.3.1: Video Resolution Comparison

Figure 2.3.2: WDR Functionality

Figure 2.3.3: LED Signal Support

3. Setup and Installation

3.1 Mounting the Main Unit

1. Ensure the vehicle's engine is off.
2. Attach the main dash cam unit to your existing rearview mirror using the provided rubber straps. Secure it firmly to prevent vibration.
3. Adjust the angle of the front camera lens, which can be tilted up/down and left/right by approximately 15 degrees.

Figure 3.1: Main Unit Installation and Features

3.2 Rear Camera Installation

1. Connect the rear camera to the main unit using the provided extension cable.
2. Route the cable neatly along the vehicle's interior trim to the rear of the vehicle. Use the cable management tool to tuck cables away.
3. Mount the rear camera at the desired location on the rear of your vehicle. The camera is IP68 waterproof, suitable for external mounting.
4. For reverse assist functionality, connect the red wire from the rear camera cable to your vehicle's reverse light power supply. Consult a professional if unsure.

Figure 3.2: Waterproof Rear Camera

3.3 Power Connection

1. Insert the car charger into your vehicle's cigarette lighter socket.
2. Connect the other end of the car charger cable to the main dash cam unit.
3. The device will power on automatically when the vehicle's ignition is turned on.

3.4 GPS Antenna and MicroSD Card

• Connect the GPS antenna to the designated port on the main unit. Mount the antenna in a location with a clear view of the sky, typically on the dashboard or windshield.
• Insert the provided 32GB MicroSD card into the MicroSD card slot on the dash cam. Ensure it is inserted correctly until it clicks into place.

Figure 3.3: GPS Antenna and Connection Cables

4. Operating Instructions

4.1 Power On/Off

The dash cam automatically powers on when the vehicle's ignition is started and powers off when the ignition is turned off. You can also manually power it on/off by pressing and holding the power button.

4.2 Touch Screen Controls

The 11-inch IPS LCD touch panel allows for intuitive control:

• Adjust View Angle: Swipe up or down on the screen to adjust the vertical viewing angle of the camera.
• Adjust Brightness: Swipe left or right on the screen to adjust the display brightness.
• Switch Display Modes: Swipe left or right from the edge of the screen to switch between front camera view, rear camera view, or split-screen display.

Figure 4.1: Touch Screen Operations

4.3 Voice Control Commands

The device supports voice commands for hands-free operation. Speak clearly when issuing commands:

• "Front Camera"
• "Back Camera"
• "Monitor On"
• "Monitor Off"
• "Take Photo"
• "Video Lock"
• "Start Recording"
• "Stop Recording"

4.4 Recording Functions

• Loop Recording: The dash cam continuously records, overwriting the oldest files when the memory card is full.
• G-Sensor (Impact Recording): In the event of a sudden impact or collision, the G-sensor automatically detects it and locks the current video file to prevent it from being overwritten.
• Parking Monitoring: When the vehicle is parked, the dash cam can detect vibrations or impacts and automatically start recording. This feature requires a continuous power supply (e.g., hardwire kit, sold separately).

Figure 4.2: Parking Monitoring and Impact Recording

4.5 Settings

Access the settings menu via the touch screen to configure various options, including:

• Video Resolution (1080p, 720p)
• Loop Recording Duration
• G-Sensor Sensitivity
• Parking Monitor Sensitivity
• Time Zone (Set to UTC +9 for Japan Standard Time)
• Date and Time
• Audio Recording On/Off
• Screen Saver
• Language

5. Maintenance

• Cleaning: Use the provided cleaning cloth and alcohol cleaner to gently wipe the camera lenses and screen. Avoid abrasive materials.
• SD Card Formatting: Regularly format the MicroSD card (at least once a month) to ensure optimal performance and prevent data corruption. This can be done through the device's settings menu.
• Firmware Updates: Check the manufacturer's website periodically for firmware updates. Follow the instructions provided with the update carefully.

6. Troubleshooting

If the problem persists, please contact customer support.

7. Specifications

8. Warranty and Support

8.1 Product Warranty

This VANBAR product comes with a 3-year product warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.

For initial defects within 30 days of delivery, free repair or replacement is available.

8.2 Customer Support

If you have any questions, concerns, or require technical assistance, please contact our customer support team. We offer Japanese language support. Email inquiries will be responded to within 24 hours.

For support, please refer to the contact information provided on the product packaging or the official VANBAR website.