Nintiue FL16886
Nintiue Dimmable Floor Lamp Instruction Manual
Model: FL16886
Introduction
Thank you for choosing the Nintiue Dimmable Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read it thoroughly before assembly and operation, and retain it for future reference.
Product Features
The Nintiue Dimmable Floor Lamp is designed with user convenience and modern aesthetics in mind. Key features include:
- Fully Dimmable (0-100%) with Rotary Switch: Easily adjust brightness to suit any mood or activity. The 4.1-foot rotary switch offers convenient control.
- Flexible Design: The lamp head features 270° horizontal rotation and 90° vertical rotation, allowing you to direct light precisely where needed for reading or working.
- 1000 Lumens LED Edison Bulb Included: Comes with an E26 base, 2700K (warm white) LED bulb with a 25,000-hour lifetime, saving up to 90% energy. Compatible with other E26 bulbs under 60W.
- Sturdy and Safe Heavy Base: Constructed with durable metal and a weighted base (6.6 lbs) to prevent tipping, ensuring stability around children and pets.
- Long Power Wire: A 5.9-foot cable provides flexibility in lamp placement.
Figure 1: Stepless dimming functionality from 0% to 100% brightness.
Figure 2: Adjustable lamp head for customized lighting angles.
Package Contents
Please verify that all components are present before beginning assembly:
- Floor Lamp Base
- Lamp Pole Sections (typically 3-4 sections)
- Lamp Head with Arm
- Linen Lampshade
- LED Edison Bulb (E26 base, 2700K, 1000 Lumens)
- User Manual (this document)
Figure 3: All components included in the package.
Assembly Instructions
Assembly is quick and straightforward, requiring no special tools.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Assemble Lamp Pole: Screw the lamp pole sections together clockwise. Ensure each section is securely tightened to prevent wobbling. Remove any protective plastic rings from the threads if present.
- Attach Lamp Base: Thread the assembled lamp pole onto the lamp base and turn clockwise until firmly secured. Ensure the power cord exits through the designated groove in the base.
- Attach Lamp Head: Screw the lamp head arm onto the top of the assembled pole.
- Install Lampshade: Place the linen lampshade onto the lamp head. Secure it by screwing the retaining ring (usually located on the lamp head) over the shade.
- Insert LED Bulb: Carefully screw the provided LED Edison bulb into the E26 socket on the lamp head. Do not overtighten.
- Position Lamp: Place the lamp in your desired location. Ensure the power cord is not pinched or obstructed.
Figure 4: The Nintiue Dimmable Floor Lamp fully assembled.
Operating Instructions
Using your Nintiue Dimmable Floor Lamp is simple:
- Power On/Off and Dimming: Plug the lamp into a standard 120V AC outlet. Locate the rotary switch on the lamp pole. Turn the switch clockwise to turn the lamp on and increase brightness. Turn counter-clockwise to dim the light and turn it off.
- Adjusting Lamp Head: To change the direction of light, gently rotate the lamp head horizontally (up to 270°) or vertically (up to 90°) to your preferred angle.
Maintenance
To ensure the longevity and optimal performance of your lamp:
- Cleaning: Disconnect the power before cleaning. Wipe the lamp pole and base with a soft, dry cloth. For the lampshade, use a lint-free cloth or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old bulb and screw in a new E26 base LED bulb (maximum 60W equivalent).
- General Care: Avoid placing the lamp in areas with high humidity or extreme temperatures. Do not hang objects from the lamp or use it as a support.
Troubleshooting
If you encounter issues with your Nintiue Dimmable Floor Lamp, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose bulb, faulty switch. | Check if plugged in securely. Test outlet with another device. Tighten bulb. Ensure switch is turned on. |
| Light flickers or dims unexpectedly. | Loose bulb, incompatible bulb, power fluctuation. | Tighten bulb. Ensure bulb is dimmable and compatible (E26, max 60W). Try a different outlet. |
| Lamp is unstable or wobbly. | Pole sections not fully tightened, base not secure. | Ensure all pole sections are screwed together tightly. Verify the pole is firmly attached to the base. |
| Lampshade is crooked. | Shade retaining ring is loose. | Adjust the lampshade and tighten the retaining ring securely. |
If the problem persists after trying these solutions, please contact Nintiue customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | FL16886 |
| Dimensions (D x W x H) | 13"D x 17"W x 10"H |
| Item Weight | 8 Pounds |
| Finish Type | Matte |
| Base Material | Metal |
| Shade Material | Metal (Linen Shade) |
| Bulb Base | E26 |
| Light Source Type | LED |
| Brightness | 1000 Lumens |
| Color Temperature | 2700 Kelvin (Warm White) |
| Wattage | 6 watts |
| Switch Type | Rotary |
| Cable Length | 5.9 Feet |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
Nintiue offers a 3-year quality warranty for this product. We stand behind the quality of our products 100%.
If your lamp has any defect or stops working within 3 years of purchase, please contact our customer service team. We will assist you with troubleshooting or arrange for a replacement product.
Customer Service Contact:
- For support, please refer to the contact information provided on your purchase receipt or the Nintiue official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.