1. Setup
1.1 Package Contents
Verify that all components are present in the package:
- Weeylite WE-9 RGB Ring Light
- Mini Tripod Stand
- Ball Head Adapter
- Phone Holder with Flexible Arm
- USB-C Charging Cable
- User Manual (this document)
Figure 2: Package Contents
1.2 Assembly
- Attach the Ball Head Adapter: Screw the ball head adapter onto the 1/4-inch screw thread located at the bottom of the ring light. Tighten securely.
- Attach the Tripod Stand: Screw the mini tripod stand onto the bottom of the ball head adapter. Extend the tripod legs for stability.
- Install the Phone Holder: Insert the flexible arm of the phone holder into the cold shoe mount located on the top-inner edge of the ring light. Adjust the flexible arm to position your phone as desired.
- Charge the Device: Connect the provided USB-C cable to the USB-C 5V IN port on the ring light and to a compatible USB power source (e.g., wall adapter, power bank). The LCD screen will indicate charging status.
Figure 3: Assembly and Key Features
2. Operating Instructions
2.1 Powering On/Off
Press and hold the power button on the control panel to turn the ring light on or off.
2.2 Manual Control
The Weeylite WE-9 features an integrated LCD display and an all-in-one knob for direct control:
- LCD Display: Shows current settings including channel (CH), group (GR), mode, power, hue, saturation, and color temperature.
- All-in-one Knob: Rotate to adjust parameters (brightness, color temperature, hue, saturation). Press to switch between different adjustable parameters or confirm selections.
- Mode Button: Press to cycle through different lighting modes (CCT, HSI, RGBW, Scene Effects).
Figure 4: Manual Control Panel and Ports
2.3 App Control
For enhanced control, download the "weeylite" app from your device's app store. The app allows for wireless control of the ring light via Bluetooth.
- Download the App: Search for "weeylite" in the App Store (iOS) or Google Play Store (Android) and install it.
- Enable Bluetooth: Ensure Bluetooth is enabled on your mobile device.
- Connect to the Light: Open the app. Set the app channel and group to match the settings displayed on the ring light's LCD screen. The app will then connect to the light.
- Control Parameters: Use the app interface to adjust brightness, color temperature, hue, saturation, and select various scene effects. The app supports controlling single or multiple lights across up to 6 groups and 19 channels.
Figure 5: App and Manual Control Options
2.4 Lighting Modes
The WE-9 offers versatile lighting options:
- CCT Mode: Adjust color temperature from 2500K (warm) to 8500K (cool) and dimmable brightness from 0% to 100%.
- HSL Mode: Control Hue, Saturation, and Lightness for a wide spectrum of colors.
- RGBW Mode: Directly adjust Red, Green, Blue, and White light components.
- Scene Lighting Effects: Choose from 29 built-in scene effects such as Flash, Firework, Burst, Blink, Flame, Filming, TV, Weld, Curves, Alarm, Movie, Rainbow, Bar, Birthday, Fairytale, Grassland, Surf, Aurora, and 7 static colors.
Figure 6: 29 Scene Lighting Effects
3. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the ring light. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the ring light in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in active use, to maintain battery health.
- Handling: Handle the ring light and its accessories with care to prevent damage. Avoid dropping or subjecting the device to strong impacts.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Low battery or no power. | Charge the ring light using the USB-C cable. Ensure the power button is pressed and held. |
| App cannot connect to the light. | Bluetooth is off or incorrect channel/group. | Ensure Bluetooth is enabled on your phone. Verify that the app's channel and group settings match the light's LCD display. |
| Light flickers or is unstable. | Low battery or power supply issue. | Charge the device fully. If using external power, ensure the USB power source provides stable 5V. |
| Phone holder is loose. | Mounting screw not tightened. | Tighten the screw on the flexible arm where it connects to the cold shoe mount. |
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | WE-9 |
| Brand | weeylite |
| Package Dimensions | 12.05 x 11.85 x 2.64 inches |
| Item Weight | 1.98 pounds |
| Battery Life | 2 Hours (normal use) |
| Connectivity Technology | USB, Bluetooth (for APP control) |
| Hardware Interface | USB, USB Type C |
| LED Bulbs | 132 pcs |
| Color Rendering Index (CRI) | RA≥95/TLCI≥97 |
| Output Power | 12W |
| Output Lumens | 1050lm |
| Color Temperature Range | 2500K-8500K |
| Scene Modes | 29 built-in effects |
6. Warranty and Support
6.1 Return Policy
This product is subject to a 30-day return policy for refund or replacement, as per standard retail terms.
6.2 Manufacturer Information
Manufacturer: weeylite
For further support or inquiries, please refer to the contact information provided with your purchase or visit the official weeylite website.