YTE HC-1810E Cordless Vacuum Cleaner User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for household use only. Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust cup and/or filters in place.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

2. Product Overview

The YTE HC-1810E Cordless Vacuum Cleaner is designed for versatile cleaning across various surfaces. It features a powerful brushless motor, multiple attachments, and an efficient filtration system.

Figure 2.1: Exploded view of the YTE HC-1810E Cordless Vacuum Cleaner showing its main components and accessories.

1. Main Motor Unit
2. Stiff Roller Brush (for carpets)
3. Metal Extension Tube
4. 2-in-1 Cleaning Brush
5. Long Crevice Brush
6. Wall Mount
7. Mounting Screws
8. Fluff Roller Brush (for hard floors)
9. Charger
10. Quick Start Guide & User Manual

Figure 2.2: The 300W brushless digital motor provides two suction modes: 26KPa Strong Suction Mode and 12KPa Standard Suction Mode.

Figure 2.3: The vacuum features a six-stage high-efficiency filtration system, including an Ionization Filter, High-Density Filter Cotton, High Molecular Cotton Filter, High-efficiency filter box, 0.5mm Metal Filter, and a Dust Cup for particle collection.

3. Setup

3.1 Assembly

Assemble the vacuum cleaner by connecting the main motor unit to the metal extension tube, and then attach the desired cleaning head (either the fluff roller brush for hard floors or the stiff roller brush for carpets) to the end of the extension tube. Ensure all connections click securely into place.

Figure 3.1: The vacuum can be assembled in different configurations, including a full stick vacuum and a handheld unit with various attachments.

3.2 Initial Charging

Before first use, fully charge the vacuum cleaner. Connect the charger to the charging port on the main motor unit and plug it into a power outlet. The charging indicator will show the charging status. A full charge typically takes approximately 5 hours.

Figure 3.2: The vacuum offers up to 40 minutes runtime in Standard Suction Mode and 15 minutes in Strong Suction Mode, with a 5-hour fast charging time.

For convenient storage and charging, you can install the wall mount (6) using the provided screws (7). The vacuum can then be hung on the wall mount, and the charger can be connected to the unit while mounted.

Figure 3.3: The vacuum can be stored upright or mounted on the wall for charging and space-saving storage.

4. Operating Instructions

4.1 Power On/Off and Suction Modes

Press the power button to turn the vacuum on. The vacuum will start in Standard Suction Mode. Press the power button again to switch to Strong Suction Mode. Press a third time to turn the vacuum off.

4.2 Using Attachments

The YTE HC-1810E comes with various attachments for different cleaning needs:

• Fluff Roller Brush (8): Ideal for delicate hard floors to prevent scratches.
• Stiff Roller Brush (2): Designed for deep cleaning carpets and rugs.
• 2-in-1 Cleaning Brush (4): Can be used as a brush for dusting or as a wide nozzle for upholstery.
• Long Crevice Brush (5): Perfect for reaching tight spaces, corners, and crevices.

To change attachments, press the release button on the current attachment and pull it off. Then, align the new attachment with the connection point and push until it clicks into place.

Figure 4.1: The vacuum includes two specialized roller brushes: a soft brush for hard floors and a hard brush for carpets, ensuring effective cleaning on different surfaces.

4.3 Versatile Cleaning

The vacuum's lightweight design and swivel head allow for easy maneuverability around furniture and into tight spaces. It can be used as a stick vacuum for floors or converted into a handheld unit for cleaning cars, upholstery, and elevated surfaces.

Figure 4.2: The cleaning head offers 180° left and right swivel and 90° up and down movement for flexible cleaning under and around obstacles.

Figure 4.3: Examples of the vacuum's versatility, including cleaning curtains, sofas, under furniture, and pet hair from floors.

Figure 4.4: The main motor unit can be detached and used as a lightweight handheld vacuum for quick clean-ups.

Figure 4.5: The handheld configuration is ideal for cleaning car interiors, reaching tight spots with the crevice tool.

Figure 4.6: Using the brush attachment, the handheld vacuum can effectively clean window sills and other delicate surfaces.

5. Maintenance

5.1 Emptying the Dust Cup

To maintain optimal suction, empty the dust cup regularly, especially when debris reaches the MAX fill line. Press the dust cup release button to detach it from the main unit, then open the bottom flap to dispose of collected debris.

5.2 Cleaning Filters

The vacuum's filtration system requires periodic cleaning. Remove the filters from the dust cup and tap them gently to remove loose dirt. For a more thorough cleaning, rinse the filters under running water. Ensure filters are completely dry before reassembling them into the vacuum. Do not use the vacuum with wet filters.

Figure 5.1: Filters can be rinsed with water for cleaning. Allow them to air dry completely before reinstallation.

5.3 Cleaning Roller Brushes

Regularly check the roller brushes for tangled hair or debris. To remove the roller brush, locate the release tab on the side of the cleaning head, unlock it, and slide out the brush. Use scissors to cut away any tangled hair, then reinsert the brush and secure the tab.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information, product support, or to purchase replacement parts, please refer to the warranty card included in your package or visit the official YTE website. Keep your purchase receipt as proof of purchase.

For further assistance, please contact YTE customer service.