Blomus MODO Wall Mounted Toilet Brush (Model 66260) Instruction Manual

1. Introduction

Thank you for choosing the Blomus MODO Wall Mounted Toilet Brush. This manual provides essential information for the proper installation, operation, and maintenance of your new toilet brush. Please read these instructions carefully before use and retain them for future reference.

Image 1: Blomus MODO Wall Mounted Toilet Brush, Black Ti Coated Stainless Steel.

The Blomus MODO toilet brush features a durable Black Ti Coated stainless steel handle and holder, designed for wall mounting to save space and provide a sleek aesthetic. It includes a plastic tray at the bottom of the holder for hygienic and easy cleaning.

2. Safety Information

• Ensure the product is securely mounted to prevent accidental falls.
• Keep out of reach of children.
• Do not use abrasive cleaners or harsh chemicals that may damage the finish.
• Handle the brush with care to avoid injury.

3. Package Contents

Verify that all components are present before beginning installation:

• 1 x Toilet Brush Handle (Stainless Steel, Black Ti Coated)
• 1 x Toilet Brush Holder (Black Ti Coated)
• 1 x Plastic Tray (for holder base)
• Mounting Hardware (screws, wall anchors)

4. Setup and Installation

The Blomus MODO toilet brush is designed for wall mounting. Follow these steps for secure installation:

1. Choose Location: Select a suitable wall location near your toilet, ensuring it is at a convenient height and does not obstruct movement.
2. Mark Drilling Points: Hold the mounting bracket (part of the holder) against the wall at the desired height. Use a pencil to mark the positions for drilling.
3. Drill Holes: Using an appropriate drill bit for your wall type, drill holes at the marked positions. Insert the wall anchors if necessary.
4. Attach Mounting Bracket: Secure the mounting bracket to the wall using the provided screws. Ensure it is firmly attached.
5. Mount Holder: Slide the toilet brush holder onto the secured mounting bracket. It should click or slide firmly into place.
6. Insert Plastic Tray: Place the plastic tray into the bottom of the toilet brush holder.
7. Insert Brush: Place the toilet brush handle into the holder.

Image 2: Example of the Blomus MODO Toilet Brush securely mounted to a wall.

5. Operation

To use the Blomus MODO toilet brush:

1. Remove the brush from its holder.
2. Clean the toilet bowl as needed.
3. After use, allow excess water to drip off the brush into the holder before returning it.

6. Maintenance and Cleaning

Regular cleaning will help maintain the appearance and hygiene of your toilet brush and holder.

• Holder: The plastic tray at the bottom of the holder can be easily removed for cleaning. Empty any accumulated water and clean with mild soap and water. Rinse thoroughly and dry before reinserting.
• Brush Head: The brush head can be rinsed with water after each use. For deeper cleaning, use a disinfectant.
• Exterior Surfaces: Wipe the Black Ti Coated stainless steel surfaces with a soft, damp cloth. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
• Replacement Parts: Replacement brush heads and handles are available from Blomus. Refer to the Blomus website or contact customer support for details.

7. Troubleshooting

If you encounter any issues, please refer to the following common solutions:

• Holder feels loose on wall: Ensure the mounting screws are tightened securely. If using wall anchors, verify they are correctly installed for your wall type.
• Brush head appears worn: The brush head is a consumable item. Replace it with a genuine Blomus replacement head for optimal performance.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to purchase replacement parts, please visit the official Blomus website or contact their customer service department.

Blomus Official Website: www.blomus.com