Roborock S7+ Robot Vacuum and Sonic Mop Instruction Manual

Introduction

The Roborock S7+ is an advanced robotic vacuum and sonic mop designed to provide comprehensive floor cleaning. Featuring a self-empty dock, sonic vibration mopping, intelligent mop lifting, and powerful suction, it offers an automated and efficient cleaning experience for various floor types.

Setup and Installation

Proper setup ensures optimal performance of your Roborock S7+. Follow these steps for initial installation:

1. Unpack Components: Carefully remove all items from the packaging. Ensure all included components are present: S7 Robot Vacuum, Auto-Empty Dock, VibraRise Water Tank, VibraRise Mop Cloth, VibraRise Mop Cloth Mount, Power Cable, Dust Bag (2), Screwdriver, and User Manual.
2. Prepare the Cleaning Area: Remove any clutter, loose cables, or small objects from the floor to prevent entanglement and ensure smooth operation.
3. Place the Dock: Position the Auto-Empty Dock on a flat, hard floor surface against a wall. Ensure there is adequate clear space around the dock: at least 0.5 meters (1.6 feet) on both sides, 1.5 meters (4.9 feet) in front, and 1 meter (3.2 feet) above for proper robot navigation and maintenance. Avoid placing the dock near heat sources, water, or on soft surfaces like carpets.
4. Connect Power: Plug the power cable firmly into the dock and then into a wall outlet. Tidy away any excess cable to prevent the robot from getting tangled.
5. Install Mop Pads: Attach the VibraRise Mop Cloths to the Mop Cloth Mount. Ensure they are securely fastened.
6. Initial Charge: Place the robot onto the dock to begin charging. The indicator light on the dock will show its status.

Operating Instructions

The Roborock S7+ offers intelligent cleaning features for various scenarios:

• Sonic Vibration Technology: The sonic mopping system scrubs floors at up to 3,000 times per minute, effectively removing dried-on dirt and stains.
• Auto-Lifting Mop: The mop automatically lifts upon detecting carpets, allowing the robot to vacuum carpets without wetting them. It also lifts when returning to the dock to prevent spreading dirt.
• Ultrasonic Carpet Detection: The robot uses ultrasonic sensors to accurately recognize carpets, enabling it to adjust its cleaning mode (e.g., mop lifting, increased suction).
• Intense 2500Pa Suction: HyperForce suction power effectively picks up dirt from hard floors, lifts it from cracks, and extracts it from carpets.
• LiDAR Navigation and Adaptive Route Algorithms: Precision LiDAR creates accurate maps of your home, and adaptive algorithms continuously refine cleaning routes for maximum efficiency.
• App Control: Use the Roborock app for comprehensive control, including route tracking, scheduling cleaning, setting clean intensity, and viewing carpet displays.
• Customizable Cleaning: Define specific cleaning modes and intensities for different rooms (e.g., Quiet for bedrooms, Max for kitchens).
• Multi-Level Mapping: The robot automatically recognizes and maps up to 4 levels of your home for efficient navigation across different floors.
• Virtual Barriers: Set virtual No-Go Zones, Invisible Walls, and No-Mop Zones in the app to restrict the robot from certain areas.
• Voice Control: Integrate with smart home devices like Amazon Echo and Google Home for convenient voice commands (e.g., "Alexa, tell Roborock S7 to clean my kitchen").

Image: The Roborock S7+ robot vacuum demonstrating its sonic mopping capability on a hard floor, effectively removing dried stains.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Roborock S7+:

• Self-Empty Dock Dust Bag: The Self-Empty Dock stores up to 120 days of dust. Replace the dust bag when full. A quick pull of the dust bag seals it shut for hygienic disposal.
• Multi-Layer Air Filtration: The dock's filtration system captures 99.99% of particles as small as 0.3 microns. Regularly check and replace filters as needed.
• VibraRise Water Tank and Mop Cloth: Empty the water tank and clean the mop cloth after each mopping session to prevent odors and maintain hygiene. The mop cloth is washable and reusable.
• Multi-Directional Floating Brush: Periodically check the main brush for tangled hair or debris and clean it to ensure effective vacuuming.
• Sensors: Wipe the robot's sensors regularly with a soft, dry cloth to ensure accurate navigation and obstacle detection.

Image: A hand removing a full dust bag from the Roborock S7+ Auto-Empty Dock, demonstrating the easy and hygienic disposal process.

Troubleshooting

If you encounter issues with your Roborock S7+, refer to these common solutions:

• Robot getting stuck: Ensure the cleaning area is free of small objects, loose cables, and thick rugs that might impede movement. The robot's obstacle avoidance system helps, but pre-cleaning the area is recommended.
• Auto-empty not working: Check if the dust bag in the dock is full and needs replacement. Ensure the robot is correctly docked and the dustbin on the robot is properly seated.
• Mapping system failing or Wi-Fi connection problems: Verify your Wi-Fi network is stable and the robot is within range. Restarting the robot and the app may resolve connectivity issues.
• Mop not cleaning effectively: Ensure the water tank is filled and the mop cloth is clean. For stubborn stains, consider running multiple passes or increasing the mopping intensity via the app.
• Loud squeaky noise when mopping: This may indicate a mechanical issue. If persistent, contact customer support.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the official Roborock website or the contact details provided in your product packaging. Ensure to register your product for warranty coverage.