Introduction
This manual provides essential information for the safe and efficient use of your Reality Leuchten Orson LED Floor Lamp, model R40073507. Please read these instructions carefully before assembly and operation to ensure proper functionality and longevity of the product. Keep this manual for future reference.
Safety Instructions
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Do not expose the lamp to moisture or extreme temperatures. This product is rated IP20 for indoor use only.
- Before cleaning or maintenance, always disconnect the lamp from the power supply.
- Do not attempt to modify the lamp or its electrical components. Repairs should only be performed by qualified personnel.
- The integrated LED light sources are not replaceable by the user.
- Avoid direct eye exposure to the light source for extended periods.
Package Contents
Verify that all components are present before beginning assembly:
- 1x Orson LED Floor Lamp (disassembled)
- 1x Power Adapter
- 1x Assembly Instructions (this manual)
Setup and Assembly
Follow these steps to assemble your Orson LED Floor Lamp:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Base: Attach the main pole sections to the base. Ensure all connections are secure and tightened.
- Attach Lamp Head and Reading Arm: Connect the uplighter head and the flexible reading arm to the main pole as indicated in the diagrams.
- Secure Wiring: Ensure all internal wiring is properly routed and not pinched during assembly.
- Connect Power: Once fully assembled, plug the power adapter into a standard AC outlet.
For visual guidance, refer to the provided diagrams. Ensure all parts are securely fastened before connecting to power.
Operating Instructions
The Orson LED Floor Lamp features touch-sensitive controls for both the uplighter and the reading arm, allowing for separate dimming.
- Power On/Off: Lightly touch the designated touch button on the lamp pole to turn the uplighter or reading arm on or off.
- Dimming Function: To adjust the brightness, press and hold the touch button. The light will gradually dim or brighten. Release the button when the desired brightness level is reached. The lamp will remember the last brightness setting when turned off and on again.
- Adjusting the Reading Arm: The reading arm is equipped with two flexible joints, allowing you to adjust its position and angle to direct light precisely for reading or other tasks.
Maintenance
Proper maintenance ensures the longevity and performance of your lamp:
- Cleaning: Disconnect the lamp from power before cleaning. Use a soft, dry, or slightly damp cloth to wipe down the metal and glass surfaces. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- LED Lifespan: The integrated LED light sources have an average lifespan of 30,000 hours and are not designed to be replaced by the user.
- Inspection: Periodically check the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Check if the power plug is securely inserted into the outlet and the lamp. Test the outlet with another device. |
| Light is too bright/dim. | Dimming function not used correctly. | Press and hold the touch button to adjust brightness. Release when desired level is reached. |
| Light flickers. | Unstable power supply or loose connection. | Ensure the power connection is secure. Try plugging into a different outlet. If flickering persists, contact support. |
| Reading arm does not hold position. | Joints are loose. | Check if the flexible joints are properly tightened. Avoid excessive force when adjusting. |
If the problem persists after attempting these solutions, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | R40073507 |
| Brand | RL LIVE YOUR LIGHT |
| Manufacturer | Reality Leuchten |
| Dimensions (H x L x W) | 180 cm x 57 cm x 32.5 cm |
| Weight | 4 kg |
| Material | Metal (Nickel Matte), Glass (Alabaster White) |
| Light Source | Integrated LED |
| Uplighter Wattage | 28 W LED |
| Uplighter Luminous Flux | 3200 Lumen |
| Reading Arm Wattage | 6 W LED |
| Reading Arm Luminous Flux | 600 Lumen |
| Color Temperature | 3000 Kelvin (Warm White) |
| Average Lifespan | 30,000 Hours |
| Special Features | Separately Dimmable Uplighter and Reading Arm, Flexible Reading Arm |
| Switch Type | Touch Button |
| Power Source | AC (Mains Powered) |
| IP Rating | IP20 (Indoor Use Only) |
| Energy Efficiency Class | F |
Warranty and Support
This Reality Leuchten product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact the retailer where you purchased the product or visit the official Reality Leuchten website for customer service contact information.
