1. Introduction
Thank you for choosing the OSRAM TYREinflate 2000 Compact Portable Tyre Inflator. This device is designed for convenient and efficient inflation of various tyres, including those for bicycles, scooters, motorcycles, and cars. It features a digital display, automatic stop function, and an integrated LED light for ease of use in different conditions. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.
Image 1.1: The OSRAM TYREinflate 2000 device shown alongside its retail packaging, highlighting its compact design and branding.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the device:
- Do not leave the inflator unattended during operation.
- Ensure the correct pressure setting for the item being inflated. Over-inflation can cause serious injury or damage.
- Keep out of reach of children.
- Do not operate the device in wet conditions or near flammable liquids/gases.
- Avoid direct exposure to sunlight or extreme temperatures.
- If the device shows signs of damage, do not use it.
- Use only the provided charging cable and adapters.
3. Package Contents
Verify that all items listed below are present in your package:
- OSRAM TYREinflate 2000 Tyre Pump
- 2-Piece Adapter Set (e.g., ball needle, Presta valve adapter)
- Air Hose (14.5cm)
- Storage Bag
- USB Charging Cable
- Bicycle Mount
Image 3.1: An illustration showing all components included in the OSRAM TYREinflate 2000 package, such as the inflator unit, various adapters, air hose, USB charging cable, bicycle mount, and a storage bag.
Image 3.2: A black drawstring storage bag, designed to hold the TYREinflate 2000 and its accessories for portability and protection.
Image 3.3: The air hose and a selection of inflation adapters, including a needle adapter for balls and a Presta valve adapter, providing versatility for different inflation needs.
4. Product Overview
The OSRAM TYREinflate 2000 is a compact, battery-powered inflator featuring a digital display and intuitive controls.
Image 4.1: A detailed view of the inflator's control panel, showing the digital display, power button, unit selection button, and pressure adjustment buttons.
Image 4.2: A side profile of the OSRAM TYREinflate 2000, highlighting its ergonomic ribbed design and prominent OSRAM branding.
Key Features:
- Digital Backlit Display: Provides clear pressure readings in BAR, KPA, and PSI.
- Automatic Stop Function: Inflates to the preset pressure and stops automatically.
- Integrated LED Light: For illumination in low-light conditions.
- USB Rechargeable: Convenient charging via USB.
- Compact and Portable: Lightweight design for easy transport and storage.
5. Setup
5.1. Charging the Device
Before first use, fully charge the TYREinflate 2000. Connect the provided USB charging cable to the device's charging port and to a suitable USB power source (e.g., wall adapter, computer USB port). The charging indicator will show the charging status. A full charge ensures optimal performance.
5.2. Attaching the Air Hose and Adapters
- Screw the air hose securely onto the inflator's air outlet.
- Select the appropriate adapter for the item you wish to inflate (e.g., Schrader valve for car/bicycle, Presta valve adapter for some bicycles, needle adapter for sports balls).
- Attach the selected adapter to the end of the air hose.
6. Operating Instructions
6.1. Power On/Off
- To power on, press and hold the power button (Ⓒ) until the display illuminates.
- To power off, press and hold the power button again. The device will also automatically power off after a period of inactivity.
6.2. Setting Desired Pressure
- With the device powered on, connect the air hose (with appropriate adapter) to the valve of the item to be inflated. The current pressure will be displayed.
- Press the unit selection button (↻) to cycle through pressure units: PSI, BAR, KPA. Select the desired unit.
- Use the '+' and '-' buttons to adjust the target pressure. The display will show the target pressure flashing.
- The device has a memory function and will recall the last set pressure.
6.3. Inflation Process
- Once the target pressure is set, press the power button (Ⓒ) to start inflation.
- The device will inflate to the preset pressure and automatically stop.
- To stop inflation manually at any time, press the power button again.
- Disconnect the air hose from the valve.
Image 6.1: The OSRAM TYREinflate 2000 positioned next to a car tire, actively inflating it. The digital display shows the current pressure reading.
6.4. LED Light Function
- To activate the LED light, press the light button (*).
- Press the light button again to cycle through different light modes (e.g., steady on, flashing, SOS) or to turn it off.
7. Maintenance
7.1. Cleaning
Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is dry before storing.
7.2. Storage
Store the TYREinflate 2000 and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the device is fully charged before long-term storage to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery or no charge. | Charge the device using the USB cable. |
| Inflator runs but no air comes out. | Air hose not securely attached or blocked. | Ensure hose is tightly screwed on and clear of obstructions. |
| Device does not stop at preset pressure. | Incorrect pressure unit selected or faulty sensor. | Verify the pressure unit. If issue persists, contact support. |
| Inaccurate pressure reading. | Loose connection to valve. | Ensure the adapter is securely connected to the valve. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | TYREinflate 2000 |
| Part Number | OTIR2000 |
| Power Source | Battery Powered (Rechargeable via USB) |
| Voltage | 4 Volts |
| Maximum Pressure | 8.3 Bars (120 PSI) |
| Operation Mode | Automatic |
| Item Weight | 0.66 Kilograms |
| Item Dimensions (LxWxH) | 2.76 x 2.83 x 6.69 inches (7 x 7.2 x 17 cm) |
| Included Components | TYREinflate 2000 Tyre Pump, 2 Piece Adapter Set, Air Hose, Storage Bag, USB Charging Cable, Bicycle Mount |
10. Warranty and Support
OSRAM products are manufactured to strict quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official OSRAM website. For technical support or service inquiries, please contact OSRAM customer service through their official channels.
Manufacturer: OSRAM
Date First Available: May 3, 2021
