Ground Zero GZIA 1.1500D

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Ground Zero Iridium 2600W Max 1Ohm Mono Class D Full Range Amplifier

Model: GZIA 1.1500D - User Manual

Official Instruction Manual

Introduction

Thank you for choosing the Ground Zero Iridium GZIA 1.1500D Mono Class D Full Range Amplifier. This manual provides essential information for the proper installation, operation, and maintenance of your amplifier. Please read this manual thoroughly before attempting installation or operation to ensure optimal performance and safety.

The GZIA 1.1500D is a powerful mono amplifier designed for car audio systems, featuring Class D technology for high efficiency and compact size. It includes variable active crossover, bass boost, and phase shift controls for precise audio tuning.

Key Features

Mono amplifier design
Efficient Class D technology
Variable active crossover and bass boost
Adjustable phase shift
Stable power supply
Large terminals for secure connections
Black anodized heatsink for effective heat dissipation
Includes bass remote control
High-level input with auto-on function

What's in the Box

Upon unpacking, please verify that all items are present and undamaged:

Ground Zero Iridium GZIA 1.1500D Amplifier
High level adapter cable
Bass remote control
Mounting hardware (screws)
User Manual (this document)

Safety Instructions

To prevent injury or damage to the amplifier, vehicle, or other property, please observe the following safety precautions:

Professional Installation Recommended: Installation of car audio components requires experience with electrical wiring and vehicle systems. If you are unsure, consult a professional installer.
Disconnect Battery: Always disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits.
Proper Ventilation: Ensure the amplifier is mounted in a location with adequate airflow to prevent overheating. Do not cover the heatsink.
Secure Mounting: Mount the amplifier securely to prevent it from coming loose during vehicle operation or in the event of a collision.
Correct Wiring: Use appropriate gauge wiring for power, ground, and speaker connections as specified in the installation section. Incorrect wiring can cause damage or fire.
Avoid Moisture: Do not expose the amplifier to moisture or extreme temperatures.
Fuse Protection: Always use the correct fuse rating as specified for the amplifier.

Setup and Installation

Careful planning and execution are crucial for optimal performance and safety. Follow these general guidelines for installation.

Mounting Location

Choose a dry, well-ventilated location away from direct sunlight and heat sources. Ensure sufficient space around the amplifier for air circulation. Common locations include under seats, in the trunk, or behind rear seats.

Wiring Connections

Refer to the diagram below for connection points. Ensure all connections are tight and secure to prevent power loss or short circuits.

Ground Zero GZIA 1.1500D Amplifier Top and Bottom View with Controls and Connections

Figure 1: Top and Bottom View of GZIA 1.1500D Amplifier showing controls and connection terminals. The top panel includes REMOTE, BASS BOOST, LPF, PHASE, GAIN, INPUT (RCA and High-Level), and POWER/PROTECT indicators. The bottom panel shows SPEAKER, FUSE, +12V, REM, and GND terminals.

Power Connection (+12V)

Connect a heavy-gauge power cable (e.g., 4 AWG or larger, depending on cable length and system power requirements) directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an inline fuse holder within 18 inches (45 cm) of the battery, using a fuse rated appropriately for the amplifier (refer to specifications for total fuse rating).

Ground Connection (GND)

Connect a heavy-gauge ground cable (same gauge as power cable) from the GND terminal on the amplifier to a clean, unpainted metal point on the vehicle's chassis. Ensure a solid, low-resistance connection. Sand away any paint or rust from the contact point.

Remote Turn-On (REM)

Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output to the REM terminal on the amplifier. This wire signals the amplifier to turn on when the head unit is powered on.

Note: The GZIA 1.1500D features a high-level input with an auto-on function. If using high-level inputs, the remote wire connection may not be necessary as the amplifier can detect an audio signal and turn on automatically.

Speaker Connection (SPEAKER)

Connect your subwoofer(s) to the SPEAKER terminals. This is a mono amplifier, so ensure your speakers are wired to present a stable impedance to the amplifier (minimum 1 Ohm). Observe correct polarity (+ to + and - to -) for optimal sound.

Input Connection (INPUT)

RCA Input: Connect RCA cables from your head unit's pre-out (subwoofer or full-range) to the RCA INPUT terminals on the amplifier.

High-Level Input: If your head unit does not have RCA outputs, use the included high-level adapter cable to connect to your head unit's speaker outputs. Connect the speaker wires from the head unit to the high-level input connector, then plug the connector into the HI INPUT (AUTO ON) port on the amplifier.

Initial Setup and Adjustments

After all connections are made, double-check your wiring before reconnecting the vehicle's battery. Once powered on, proceed with the following adjustments:

Gain Control: Start with the GAIN control at minimum. Play a familiar track and slowly increase the gain until you hear distortion, then back off slightly. This matches the amplifier's input sensitivity to your head unit's output.
LPF (Low Pass Filter): Adjust the LPF to filter out frequencies above your subwoofer's operating range. A common starting point is 80-100 Hz.
Bass Boost: Use the BASS BOOST control sparingly. Excessive bass boost can cause distortion and damage to speakers.
Phase: Adjust the PHASE switch (0° or 180°) to achieve the best bass response and integration with your front speakers. Listen for the strongest, most impactful bass.

Operating the Amplifier

Once installed and configured, the amplifier operates automatically with your vehicle's audio system. The POWER indicator light will illuminate when the amplifier is on. If the PROTECT light illuminates, it indicates a fault condition (e.g., short circuit, overheating, low voltage). Refer to the troubleshooting section.

Ground Zero GZIA 1.1500D Amplifier Front View

Figure 2: Front view of the Ground Zero GZIA 1.1500D amplifier, showcasing its sleek black anodized heatsink with the "GROUND ZERO IRIDIUM HIGH POWER AMPLIFIER" branding.

Maintenance

The Ground Zero GZIA 1.1500D amplifier requires minimal maintenance. Follow these guidelines to ensure its longevity:

Keep Clean: Periodically wipe the amplifier's exterior with a soft, dry cloth to remove dust. Do not use liquid cleaners or solvents.
Ensure Ventilation: Regularly check that the amplifier's heatsink fins are not obstructed by debris or wiring, ensuring proper airflow.
Check Connections: Occasionally inspect all power, ground, remote, and speaker connections to ensure they remain tight and free of corrosion.
Avoid Overloading: Do not operate the amplifier beyond its specified power ratings or with speaker impedances lower than 1 Ohm, as this can lead to overheating and damage.

Troubleshooting

If you experience issues with your amplifier, consult the following table before seeking professional assistance:

Problem	Possible Cause	Solution
No Power (POWER light off)	Blown fuse (inline or amplifier) Poor power or ground connection No remote turn-on signal Vehicle battery discharged	Check and replace fuses if necessary (use correct rating). Verify all power and ground connections are secure and clean. Check remote wire connection and head unit's remote output. Charge or replace vehicle battery.
PROTECT light on	Overheating Speaker short circuit Speaker impedance too low DC offset detected	Allow amplifier to cool down. Ensure proper ventilation. Check speaker wiring for shorts (wires touching each other or chassis). Verify speaker impedance is 1 Ohm or higher. Disconnect speakers and inputs; if PROTECT light goes off, issue is external.
No Sound	Input signal issue (RCA/High-level) Speaker wires disconnected or incorrect polarity Gain set too low Head unit settings	Check RCA/High-level connections from head unit. Verify speaker connections and polarity. Increase GAIN control slowly. Check head unit's volume, fader, and subwoofer output settings.
Distorted Sound	Gain set too high Bass Boost set too high Clipping from head unit Speaker damage	Reduce GAIN control. Reduce BASS BOOST. Lower head unit volume. Inspect speakers for damage.

Specifications

The following are key technical specifications for the Ground Zero Iridium GZIA 1.1500D amplifier:

Model: GZIA 1.1500D
Type: Mono Amplifier
Technology: Class D
Maximum Power Output: 2600W (Max)
Minimum Stable Impedance: 1 Ohm
Voltage: 14 Volts (Nominal)
Maximum Supply Voltage: 14 Volts
Product Dimensions (L x W x H): 14.17 x 7.56 x 1.93 inches (36 x 19.2 x 4.9 cm)
Weight: Approximately 9.13 Pounds (4.14 kg)
Mounting Type: Surface Mount
Features: Variable active crossover, bass boost, phase shift, stable power supply, large terminals, black anodized heatsink, bass remote control, high level input with auto on function.

Warranty and Support

Ground Zero products are manufactured to high quality standards. This amplifier is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical support, warranty service, or further inquiries, please contact your authorized Ground Zero dealer or visit the official Ground Zero website. Do not attempt to repair the amplifier yourself, as this may void the warranty and cause further damage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.