LiftMaster 380UT 2-Button Universal Remote Control User Manual
Product Overview
The LiftMaster 380UT 2-button remote control is a versatile and universal device designed to operate garage door openers or gate operators. This remote allows you to control up to two separate doors or gates, or a combination of two doors, gates, or lighting, effectively reducing the need for multiple remotes. Its user-friendly design and enhanced compatibility provide a straightforward method for wireless and automatic operation of your garage door.
Equipped with Security+ rolling-code technology, the 380UT enhances safety by transmitting a unique code to your garage door opener with each press. The tri-band operating frequency minimizes interference and extends the remote's range. Its compact and durable construction makes it convenient for daily use, fitting easily into a pocket, purse, or backpack.
Image: Front view of the LiftMaster 380UT 2-Button Universal Remote Control.
Key Features
- Universal Compatibility: Works with most major brands of garage door openers and gate operators, including LiftMaster, Chamberlain, Craftsman, Genie, Linear, Stanley, and Wayne-Dalton.
- Multiple Buttons: Features two buttons, enabling control of up to two garage door openers or gate operators independently.
- Easy to Use: Designed for straightforward setup and operation.
- Security+ Rolling-Code Technology: Improves security by sending a unique code with each click, preventing code duplication.
- Tri-Band Operating Frequency: Minimizes interference and extends operational range.
- Compact and Durable Design: Ideal for portability and long-lasting use.
Image: The 380UT remote highlighting its 2-button universal control.
Image: Demonstrates multi-device control capability.
Image: Illustrates the remote's ability to provide real-time alerts (though this feature is typically MyQ app related, the image is provided).
Image: Shows the remote in context of smartphone control (likely referring to MyQ integration).
Setup and Programming
The LiftMaster 380UT remote is designed for easy programming. Follow these steps to connect your remote to your garage door opener or gate operator:
- Access the Program Button: Gently pry open the front cover of the 380UT remote to reveal the small program button located inside.
- Activate Learn Mode on Opener: Locate the "Learn" button on your garage door opener or gate operator. Press and release this button. The indicator light on your opener will typically illuminate or blink, signifying it is in learn mode.
- Program the Remote: Within 30 seconds of activating the learn mode on your opener, press and release the desired button on your 380UT remote (either button 1 or button 2) the number of times specified by your opener's manual (e.g., one, two, or three times).
- Confirm Programming: After pressing the remote button, the opener's light will blink or turn off, indicating successful programming. Test the remote by pressing the programmed button; your garage door or gate should activate.
Refer to your specific garage door opener or gate operator manual for detailed instructions on activating its "Learn" mode, as the process and number of remote button presses may vary by model and brand.
Operating Instructions
Once programmed, operating your LiftMaster 380UT remote is simple:
- Opening/Closing: Press the programmed button on your remote once to open or close the connected garage door or gate.
- Stopping Operation: Press the button again while the door or gate is in motion to stop its movement.
- Multiple Devices: If you have programmed both buttons, ensure you press the correct button for the desired door or gate.
Maintenance
Battery Replacement
The LiftMaster 380UT remote uses one CR2 battery (included). When the remote's range decreases or it becomes unresponsive, it's likely time to replace the battery.
- Open the Remote: Carefully pry open the front cover of the remote.
- Remove Old Battery: Locate the CR2 battery and remove it from its compartment.
- Insert New Battery: Insert a new CR2 battery, ensuring correct polarity (+ and -).
- Close the Remote: Snap the front cover back into place.
After replacing the battery, you may need to re-program the remote to your garage door opener or gate operator if it does not respond immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not working after programming. | Incorrect programming steps, battery low/dead, or remote out of range. | Re-program the remote following the "Setup and Programming" steps. Replace the battery. Ensure you are within operational range of the opener. |
| Weak signal or limited range. | Low battery, interference, or environmental factors. | Replace the battery. Check for sources of interference (e.g., other wireless devices). Ensure a clear line of sight to the opener. |
| Remote controls the wrong door. | Incorrect button programmed for the desired door. | Clear the programming for that button and re-program it to the correct door. |
Specifications
| Feature | Detail |
|---|---|
| Manufacturer | LiftMaster |
| Part Number | 380UT |
| Item Weight | 2.39 ounces |
| Product Dimensions | 4.63 x 2.75 x 1.13 inches |
| Item Model Number | 380UT |
| Batteries | 1 CR2 batteries required (included) |
| Power Source | Battery-Powered |
| Item Package Quantity | 1 |
| Special Features | Universal |
| Battery Cell Type | Lithium Ion |
| Date First Available | April 26, 2021 |
Warranty Information
The LiftMaster 380UT Universal Remote Control comes with a 1 Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Image: Visual confirmation of the 1-year warranty.
Support
For additional support, frequently asked questions, or to explore other LiftMaster products, please visit the official LiftMaster Store:
Visit the LiftMaster Store on Amazon
You can also refer to the comprehensive instructions included with your product for detailed programming guides specific to various garage door opener models.
