Introduction
Thank you for purchasing the Craig CD6951-SL Portable Top-Loading CD Boombox. This device combines a CD player, AM/FM stereo radio, and a cassette player/recorder into a compact, portable unit. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.
Important Safety Information
Please read all safety and operating instructions carefully before using this product. Retain this manual for future reference.
- Do not expose this appliance to rain or moisture.
- Do not block any ventilation openings.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this appliance during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Package Contents
- Craig CD6951-SL Portable CD Boombox
- AC Power Cord
- User Manual
Product Overview
Familiarize yourself with the various parts and controls of your boombox.
Image: Front view of the Craig CD6951-SL boombox with key features labeled, including the top-loading CD player, LED display, 6-key cassette player/recorder, AM/FM stereo radio, and 3.5mm Aux-in jack.
Image: Front view of the Craig CD6951-SL portable boombox, showcasing the control panel, speakers, and overall design.
Image: Rear view of the Craig CD6951-SL boombox, highlighting the AUX-in port and the AC power cord connection.
Key Features:
- Top-Loading CD Player (CD-R/CD-RW compatible)
- AM/FM Stereo Radio
- 6-Key Cassette Player/Recorder
- LED Display
- 3.5mm Auxiliary Input (Aux-in)
- Portable design with sturdy carry handle
- AC/DC Power options (AC cord included, 6 x 'C' batteries not included)
Setup
Power Connection:
Your boombox can be powered by either AC (household current) or DC (batteries).
AC Power:
- Ensure the unit is turned off.
- Insert the supplied AC power cord into the AC socket located on the back of the unit.
- Plug the other end of the AC power cord into a standard AC wall outlet (120V ~ 60Hz).
Image: Rear view of the Craig CD6951-SL boombox showing the AC power cord connected to the unit.
DC (Battery) Power:
For portable use, you can power the boombox with batteries.
- Open the battery compartment cover on the bottom of the unit.
- Insert 6 x 'C' size batteries (not included) according to the polarity diagrams (+/-) inside the compartment.
- Close the battery compartment cover securely.
- When operating on battery power, disconnect the AC power cord from the unit.
Antenna:
For optimal FM reception, fully extend the telescopic FM antenna. For AM reception, the unit has a built-in ferrite bar antenna, which is directional. Rotate the unit for the best AM reception.
Operating Instructions
General Operation:
- Press the POWER button to turn the unit ON or OFF.
- Adjust the VOLUME control knob (usually on the side) to your desired listening level.
- Use the FUNCTION/MODE switch (if present, or dedicated buttons) to select between CD, Radio (AM/FM), or Cassette modes.
CD Playback:
- Press the POWER button to turn on the unit.
- Select the CD function using the mode switch/button.
- Open the CD compartment door by gently lifting it.
- Place a CD (label side up) onto the center spindle.
- Close the CD compartment door. The LED display will show "---" then the total number of tracks.
- Press the PLAY/PAUSE button (►/❚❚) to start playback. The track number will appear on the LED display.
- To pause playback, press PLAY/PAUSE. Press again to resume.
- To skip to the next track, press the NEXT (►►) button.
- To go back to the beginning of the current track or previous track, press the PREVIOUS (◄◄) button.
- To stop playback, press the STOP (■) button.
- Repeat Function: Press the REPEAT button once to repeat the current track. Press again to repeat all tracks. Press a third time to cancel.
- Program Function: While in STOP mode, press the PROG button. The LED display will flash "01". Use the NEXT (►►) or PREVIOUS (◄◄) buttons to select the desired track. Press PROG again to confirm. Repeat for up to 20 tracks. Press PLAY/PAUSE to start programmed playback.
Radio Operation (AM/FM):
- Press the POWER button to turn on the unit.
- Select the RADIO function using the mode switch/button.
- Set the AM/FM band selector to your desired band.
- Rotate the TUNING knob (usually on the side) to select your desired radio station.
- Adjust the VOLUME control.
- For FM reception, extend the telescopic antenna. For AM, rotate the unit for best reception.
Cassette Playback:
- Press the POWER button to turn on the unit.
- Select the TAPE function using the mode switch/button.
- Open the cassette compartment door.
- Insert a pre-recorded cassette tape with the exposed tape facing upwards.
- Close the cassette compartment door.
- Press the PLAY button (►) on the cassette control panel to start playback.
- To fast forward, press the FAST FORWARD (►►) button. Press PLAY to resume or STOP to end.
- To rewind, press the REWIND (◄◄) button. Press PLAY to resume or STOP to end.
- To stop playback, press the STOP/EJECT (■/▲) button.
- To pause playback, press the PAUSE (❚❚) button. Press again to resume.
Cassette Recording:
You can record from the CD player or the AM/FM radio onto a blank cassette tape.
Recording from CD:
- Insert a blank cassette tape into the cassette compartment.
- Select the CD function and load the CD you wish to record.
- Start CD playback at the desired point.
- Press the RECORD (●) button on the cassette control panel. The PLAY button will also engage. Recording will begin.
- To stop recording, press the STOP/EJECT (■/▲) button.
Recording from Radio:
- Insert a blank cassette tape into the cassette compartment.
- Select the RADIO function and tune to the desired station.
- Press the RECORD (●) button on the cassette control panel. The PLAY button will also engage. Recording will begin.
- To stop recording, press the STOP/EJECT (■/▲) button.
Auxiliary Input (AUX-IN):
The 3.5mm AUX-IN jack allows you to connect external audio devices (e.g., smartphone, MP3 player) to play through the boombox speakers.
- Connect one end of a 3.5mm audio cable (not included) to the AUX-IN jack on the boombox.
- Connect the other end of the cable to the headphone jack or audio output of your external device.
- Press the POWER button to turn on the unit.
- Select the AUX function using the mode switch/button.
- Start playback on your external device.
- Adjust the volume on both your external device and the boombox for optimal sound.
Maintenance
Cleaning the Unit:
- Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- For the CD lens, use a specialized CD lens cleaner disc.
- For the cassette deck, periodically clean the tape heads, capstan, and pinch roller with a cotton swab lightly dampened with isopropyl alcohol.
Battery Care:
- Remove batteries if the unit will not be used for an extended period to prevent leakage.
- Do not mix old and new batteries, or different types of batteries.
- Dispose of used batteries responsibly according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | AC cord not properly connected; Batteries depleted or incorrectly inserted. | Check AC cord connection; Replace batteries or ensure correct polarity. |
| No sound | Volume too low; Incorrect function selected; Headphones connected. | Increase volume; Select correct function (CD, Radio, Tape, AUX); Disconnect headphones. |
| CD skips or does not play | CD dirty or scratched; CD inserted incorrectly; Unit is vibrating. | Clean or replace CD; Insert CD label side up; Place unit on a stable surface. |
| Poor radio reception | Antenna not extended/positioned; Weak signal. | Extend and adjust FM antenna; Rotate unit for AM reception; Try moving the unit to a different location. |
| Cassette tape not playing/recording | Tape incorrectly inserted; Tape tangled or damaged; Cassette heads dirty. | Ensure tape is inserted correctly; Use a different tape; Clean cassette heads. |
Specifications
- Model: CD6951-SL
- Power Source: AC 120V ~ 60Hz or 6 x 'C' size batteries (DC 9V)
- CD Player: Top-loading, CD-R/CD-RW compatible
- Radio Bands: AM/FM Stereo
- Cassette Deck: 6-key player/recorder
- Auxiliary Input: 3.5mm jack
- Dimensions (L x W x H): Approximately 10.75 x 6.14 x 10 inches (27.3 x 15.6 x 25.4 cm)
- Weight: Approximately 3.79 pounds (1.72 kg)
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the manufacturer's official website. Keep your proof of purchase for warranty claims.
Manufacturer: World and Main
Brand: Craig
