Manuals+

Pyle PWPBT67, PDIC60

Pyle PWPBT67 Bluetooth Wall Mount Receiver and PDIC60 In-Wall/In-Ceiling Speaker System

User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Pyle PWPBT67 Bluetooth In-Wall Audio Control Receiver and Pyle PDIC60 6.5-inch In-Wall/In-Ceiling Midbass Speakers. This system is designed to provide convenient wireless audio streaming and high-quality sound for your home or office environment. The PWPBT67 allows for Bluetooth connectivity, auxiliary input, and USB charging, while the PDIC60 speakers deliver clear stereo sound with a flush-mount design.

Pyle PWPBT67 Bluetooth Wall Mount Receiver and PDIC60 In-Wall/In-Ceiling Speakers
Pyle PWPBT67 Bluetooth Wall Mount Receiver and PDIC60 In-Wall/In-Ceiling Speakers. This image displays both the PWPBT67 wall plate receiver and a pair of PDIC60 round in-ceiling speakers, illustrating the complete audio system.

What's in the Box

  • 1 x Pyle PWPBT67 Bluetooth In-Wall Audio Control Receiver
  • 1 x DC Power Adapter for PWPBT67
  • 2 x Pyle PDIC60 6.5-inch In-Wall/In-Ceiling Midbass Speakers
  • 2 x Pole Mounts (for speakers, if applicable)
  • 1 x Ceiling Mount (for speakers, if applicable)
  • Cut-out Template for PDIC60 Speakers
Pyle PWPBT67 Receiver Components
Components included with the Pyle PWPBT67, featuring the wall mount receiver, its rear connection module, and the DC power adapter.

Safety Information

Please read all safety instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Electrical Safety: Installation should be performed by a qualified electrician or in accordance with local electrical codes. Ensure power is disconnected at the circuit breaker before beginning any wiring.
  • Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Water and Moisture: Do not expose this apparatus to rain or moisture. Do not use this apparatus near water.
  • Cleaning: Clean only with a dry cloth.
  • Power Source: Use only the power supply adapter provided by the manufacturer.

Setup

PWPBT67 Bluetooth Receiver Installation

The PWPBT67 receiver is designed for in-wall installation, fitting into standard U.S. electrical gang boxes. Ensure power is off before proceeding.

  1. Prepare the Wall Box: Ensure you have a standard single-gang electrical box installed in your desired location.
  2. Connect Power: Connect the DC 15V power adapter to the receiver's DC input.
  3. Connect Audio Output: Use RCA cables to connect the L/R Audio Out ports on the rear of the PWPBT67 to your amplifier or powered speaker system.
  4. Optional RJ-45 Connection: If integrating with a network system, connect an RJ-45 cable to the designated port.
  5. Mount the Receiver: Carefully place the receiver into the wall box and secure it with screws. Attach a decorative wall plate frame cover (not included) if desired.
Pyle PWPBT67 Front and Rear Views
Front and rear view of the Pyle PWPBT67 Bluetooth In-Wall Audio Control Receiver, showing the control panel with volume knob, USB ports, and audio input, and the rear connections including RCA audio out and DC power input.
Pyle PWPBT67 Wiring Diagram
Detailed wiring diagram for the Pyle PWPBT67 receiver, illustrating connections for source control, audio output, and optional RJ-45 network integration.

PDIC60 Speaker Installation

The PDIC60 speakers are designed for flush mounting in walls or ceilings.

  1. Choose Location: Select a suitable location in your wall or ceiling, ensuring no obstructions (e.g., studs, electrical wires, plumbing).
  2. Cut the Opening: Use the provided cut-out template to trace the opening. Carefully cut the hole using an appropriate tool. The cut-out dimensions are approximately 7 7/8 inches in diameter.
  3. Run Speaker Wire: Run speaker wires from your amplifier (connected to the PWPBT67) to the speaker openings. Ensure proper polarity (+ to + and - to -).
  4. Connect Speakers: Connect the speaker wires to the spring-loaded terminals on the back of each PDIC60 speaker.
  5. Mount Speakers: Insert the speaker into the cut-out. Tighten the mounting screws on the front baffle. This will rotate the mounting tabs behind the wall/ceiling, securing the speaker in place.
Pyle PDIC60 Front View
Front view of a Pyle PDIC60 6.5-inch In-Wall/In-Ceiling Speaker, showcasing its flush-mount design and integrated tweeter.
Pyle PDIC60 Rear View
Rear view of a Pyle PDIC60 6.5-inch In-Wall/In-Ceiling Speaker, highlighting the speaker terminals for wire connection and mounting clamps.

Operating Instructions

Power On/Off

Once installed and connected to power, the PWPBT67 receiver will power on. There is no dedicated power button on the front panel.

Bluetooth Pairing

  1. Ensure the PWPBT67 is powered on.
  2. Activate Bluetooth on your audio device (smartphone, tablet, etc.).
  3. Search for available Bluetooth devices. The PWPBT67 will appear as 'Pyle Audio'.
  4. Select 'Pyle Audio' to pair. A confirmation tone may sound upon successful pairing.
  5. You can now stream audio wirelessly to the connected PDIC60 speakers. The Bluetooth wireless range is up to 50 feet.

AUX (3.5mm) Input

For wired audio connection, plug a 3.5mm audio cable from your external device into the AUX (3.5mm) input jack on the front panel of the PWPBT67. The receiver will automatically switch to AUX input when a cable is detected.

Volume Control

Adjust the audio output level using the rotary volume control knob on the front panel of the PWPBT67.

USB Device Charging

The PWPBT67 features dual USB DC 5V ports for charging compatible devices such as smartphones, tablets, and other USB-powered accessories.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surfaces of the PWPBT67 receiver and PDIC60 speakers. Do not use liquid cleaners or aerosol sprays.
  • Dust: Regularly dust the speaker grilles to maintain optimal sound quality.
  • Connections: Periodically check all wiring connections to ensure they are secure.

Troubleshooting

  • No Power to PWPBT67:
    • Ensure the DC power adapter is securely connected to the receiver and a working power outlet.
    • Check the circuit breaker for the electrical outlet.
  • No Sound from Speakers:
    • Verify that the PWPBT67's RCA audio outputs are correctly connected to your amplifier/powered speakers.
    • Check that the speaker wires are securely connected to both the amplifier and the PDIC60 speakers, observing correct polarity.
    • Ensure the volume on the PWPBT67 and your connected audio device is turned up.
    • Confirm the correct input source (Bluetooth or AUX) is active on the PWPBT67.
  • Bluetooth Not Connecting:
    • Make sure the PWPBT67 is powered on and within the 50-foot range of your Bluetooth device.
    • Ensure Bluetooth is enabled on your audio device.
    • Try forgetting 'Pyle Audio' from your device's Bluetooth settings and re-pairing.
    • Restart both the PWPBT67 (by unplugging and re-plugging the power adapter) and your audio device.

Specifications

Pyle PWPBT67 Bluetooth Receiver

  • Bluetooth Version: 4.0, A2DP
  • Bluetooth Wireless Range: Up to 50 feet
  • USB Ports: (2) DC 5V for charging
  • Audio Input: 3.5mm AUX
  • Audio Output: RCA (L/R)
  • Power Connector: DC 15V
  • Optional Connection: RJ45 Cable
  • Fits: Universal Standard Wall Plate Size, U.S. Electrical Gang Boxes

Pyle PDIC60 In-Wall/In-Ceiling Speakers

  • Speaker Type: 2-Way Stereo Sound
  • Midbass Speaker: 6.5 inches
  • Tweeter: 1-inch Directable Titanium Dome
  • Peak Power: 250 Watts
  • Frequency Response: 65Hz - 22kHz
  • Impedance: 4-8 Ohm
  • Mounting Type: Flush Mount (In-Wall / In-Ceiling)
  • Cut-Out Dimensions: 7 7/8 inches Diameter x 2 3/4 inches Depth
  • Overall Dimensions: 9 inches Diameter x 2 3/4 inches Depth

Warranty and Support

Pyle products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Pyle website. For technical support or service inquiries, please contact Pyle customer service.

Please retain your proof of purchase for warranty claims.

Related Documents - PWPBT67, PDIC60

Preview Pyle Bluetooth Ceiling/Wall Speakers User Guide & Installation
Comprehensive user guide for Pyle Bluetooth Ceiling/Wall Speakers (PDICBT series). Includes technical specifications, installation instructions, and Bluetooth wiring diagrams for models PDICBT552RD, PDICBT652RD, PDICBT852RD, PDICBT256, PDICBT266, PDICBT286, PDICBT2106.
Preview Pyle Dryver Pro In-Ceiling & In-Wall Speaker Installation Manual
Comprehensive installation manual for Pyle Dryver Pro in-ceiling and in-wall speakers. Covers product inclusion, optimal speaker placement for front, rear, and in-ceiling setups, detailed connection tips, step-by-step installation guides for existing construction, wiring diagrams, necessary tools, troubleshooting common issues, and technical specifications including dimensions.
Preview Pyle In-Wall/In-Ceiling Universal Mountable Aluminum Alloy-Framed Speaker Systems Installation Manual
Installation manual for Pyle's in-wall and in-ceiling universal mountable aluminum alloy-framed speaker systems, covering models with and without LED lights and Bluetooth connectivity.
Preview Pyle Home Audio Amplifier & Wall Mount Speakers User Manual
Comprehensive user manual for Pyle Home Mini Audio Amplifier (PFA200) and Pyle 3.5" Wall Mount Home Speakers (PLMR24B, PLMR24, PLMR24S), covering features, specifications, and installation instructions for optimal sound.
Preview Pyle PBKSR40WT Desktop Wireless BT Bookshelf Speakers User Guide
User guide for the Pyle PBKSR40WT Desktop Wireless BT Bookshelf Speakers, detailing setup, connections, troubleshooting, and technical specifications for optimal audio performance.
Preview Pyle PLUTV63BTA 6.5" Marine/Off-Road Wireless BT Speakers User Guide
Detailed user guide and technical specifications for the Pyle PLUTV63BTA amplified marine and off-road wireless Bluetooth speaker system, designed for ATVs, UTVs, 4x4s, and Jeeps.