Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Barkan Full Motion Articulating TV Wall Mount, Model BM443LP. This mount is designed for flat and curved screens ranging from 13 to 83 inches and supports weights up to 95 lbs (43 kg). It offers four movements: rotation, folding, swivel, and tilt, allowing for optimal viewing angles.
Safety Information
Please read all instructions carefully before installation. Incorrect assembly or use may result in property damage or personal injury. Ensure you have all necessary tools and hardware before beginning. If you are unsure about any part of the installation, consult a qualified professional.
- Weight Capacity: Do not exceed the maximum weight capacity of 95 lbs (43 kg).
- Screen Size: Compatible with screens from 13 to 83 inches.
- Wall Type: Ensure the wall structure can safely support the combined weight of the mount and the TV. Refer to the "Wall Compatibility" section for details.
- Hardware: Use only the provided hardware or suitable alternatives as specified. If your TV requires different screen-connection screws, purchase them from a local hardware store or contact Barkan support.
Package Contents
Verify that all components are present before starting the installation. The package includes:
- TV Mount
- Hardware Kit (various screws, anchors, washers, spacers)
- Assembly Instructions
Specifications
| Feature | Detail |
|---|---|
| Mounting Type | Wall Mount |
| Movement Type | Articulating, Rotate, Swivel, Tilt |
| Compatible Screen Sizes | 13 - 83 inches |
| Maximum Load Capacity | 95 lbs (43 kg) |
| VESA Compatibility | 75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x300, 300x400, 400x200, 400x300, 400x400, 400x600, 600x300, 600x400 mm (and non-VESA up to 600x400 mm) |
| Minimum Distance from Wall | 3.1 inches (8 cm) |
| Maximum Extension from Wall | 26 inches (66 cm) |
| Tilt Angle | -5° to +15° |
| Swivel Angle | Up to 180° (near screen connection plate) |
| Rotation | 180° (near wall), 360° (fold) |
| Material | Metal |
| Color | Black |
Setup and Installation
Wall Compatibility
The mount is compatible with the following wall types:
- Drywall with wood studs
- Concrete blocks / Concrete wall
Note: Not suitable for drywall/gypsum/plaster walls without studs.
Required Tools
Before installation, ensure you have the following tools:
- Drill (1/4" - 6mm and 3/8" - 10mm bits for concrete/wood, 5/32" - 4mm for wood)
- Level
- Safety glasses
- Stud finder (for drywall with wood studs)
Assembly Steps
Follow these general steps for assembly. A drilling template is included for easy and accurate installation.
- Connect the TV plate to the back of the TV: Attach the adapter plates to the VESA mounting holes on the rear of your television using the appropriate screws from the hardware kit.
- Install the bracket on the wall: Securely mount the wall bracket to your chosen wall location, ensuring it is level and using the correct anchors and screws for your wall type.
- Snap the TV onto the bracket: Carefully lift the TV with the attached plates and hook it onto the wall bracket. Ensure it is securely seated and locked into place.
Backscreen Connection Positioning
The mount supports various VESA patterns. Refer to the diagram below for common backscreen connection positioning options. All TV backscreen connections are in millimeters (Width x Height).
Operating Instructions
The Barkan Full Motion TV Wall Mount offers flexible adjustments for an optimal viewing experience. You can easily rotate, swivel, or tilt the TV by gently pushing or pulling it to the desired angle.
- Tilt: Adjust the screen vertically from -5° to +15° without tools.
- Swivel: Pivot the screen horizontally up to 180° at the screen connection plate.
- Rotation/Fold: The mount rotates 180° near the wall and folds 360° for extensive positioning.
- Extension: Extend the TV from a minimum of 3.1 inches (8 cm) to a maximum of 26 inches (66 cm) from the wall.
- Leveling: The mount allows for a leveling adjustment of ±5°.
Determining Maximum Swivel Angle
The maximum swivel angle depends on your TV's size and its distance from the wall. For optimal viewing, the line of sight should be perpendicular (90°) to the screen.
Maintenance
To ensure continued safe and optimal performance of your TV wall mount:
- Periodically check all screws and connections to ensure they are tight and secure.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure that cables are properly managed and not pinched by the moving parts of the mount.
Troubleshooting
- Missing or Incorrect Screws: If your screen requires different screen-connection screws than those provided, please purchase them from your local hardware store or contact Barkan support.
- Backscreen Connection Issues: If your TV's backscreen connections do not match any of the positions shown in Figure 7, please contact Barkan support for assistance.
- Mount Feels Loose: Re-check all wall and TV connection screws to ensure they are tightened according to the installation instructions. Do not overtighten.
- Difficulty Adjusting: Ensure no cables are obstructing movement. If the mount is stiff, check for any debris or obstructions in the joints.
Warranty and Support
The Barkan Full Motion TV Wall Mount comes with a Lifetime Limited Warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please visit www.barkanmounts.com/support or contact Barkan customer service.
