Introduction
This manual provides essential instructions for the safe and efficient use of your Eveready LED Tactical Flashlight. Please read this manual thoroughly before operating the device and retain it for future reference.
Image: The Eveready LED Tactical Flashlight, showcasing its compact design, included lanyard, and micro USB charging cable.
The Eveready Metal Rechargeable Flashlight is designed for versatility and durability, suitable for various outdoor activities, emergencies, and general household use. It features a robust aluminum body, multiple light modes, and convenient USB recharging.
Product Features
- USB Rechargeable: Equipped with a non-removable 1865 battery, rechargeable via micro USB.
- Compact Design: Lightweight aluminum body for portability.
- Multiple Light Modes: High, Low, and Strobe settings.
- High Brightness: Emits up to 500 lumens on High mode.
- Water Resistant: IPX4 rating for use in various weather conditions.
- Durable Construction: Aluminum body for enhanced resilience.
- Lanyard Attachment: Includes a lanyard for secure carrying.
Image: A visual breakdown of the flashlight's key features, including its rechargeable nature, durable build, and multiple light modes.
Setup
1. Initial Charging
- Locate the micro USB charging port on the side of the flashlight.
- Connect the included micro USB charging cable to the flashlight's port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., power bank, car charger, computer USB port).
- The flashlight's indicator light will show charging status. Ensure the flashlight is turned off during charging.
- Charge the flashlight fully before first use. Initial charging may take several hours.
Image: The Eveready flashlight positioned next to its micro USB charging cable, illustrating the components for recharging.
2. Attaching the Lanyard
- Thread the thin loop of the lanyard through the small hole located at the tail end of the flashlight.
- Pass the larger loop of the lanyard through the thin loop and pull to secure.
- Ensure the lanyard is firmly attached before use to prevent accidental drops.
Operating Instructions
Power Button and Mode Selection
The flashlight features a single push-button switch for power control and mode cycling.
- Turn On/High Mode: Press the power button once to turn on the flashlight in High mode (500 lumens).
- Low Mode: From High mode, press the power button again to switch to Low mode.
- Strobe Mode: From Low mode, press the power button a third time to activate Strobe mode.
- Turn Off: From Strobe mode, press the power button a fourth time to turn off the flashlight. Alternatively, if the flashlight has been in any mode for more than 5 seconds, a single press will turn it off.
Image: Visual representation of the flashlight's three operational modes: High, Low, and Safety Strobe.
Beam Performance
- The flashlight provides a vivid, wide, and ultra-bright beam.
- Beam distance can reach up to 200 meters (approximately 656 feet) on High mode.
Image: The flashlight in use, demonstrating its powerful 500-lumen output and wide beam spread.
Image: The flashlight's beam reaching a significant distance, highlighting its 200-meter range capability.
Maintenance
Cleaning
- Wipe the flashlight's exterior with a soft, damp cloth.
- Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.
- Ensure the charging port cover is securely closed to maintain water resistance.
Storage
- Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
- For long-term storage, charge the battery periodically (e.g., every 3-6 months) to maintain battery health.
Battery Care
- The flashlight contains a non-removable Lithium Ion battery. Do not attempt to replace it.
- Avoid fully discharging the battery frequently, as this can reduce its lifespan.
- If the flashlight will not be used for an extended period, ensure it has a partial charge before storing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Battery is discharged. | Charge the flashlight using the provided micro USB cable. |
| Light is dim or flickers. | Low battery charge. | Recharge the flashlight. |
| Flashlight does not charge. |
|
|
| Water ingress after exposure to moisture. | Charging port cover not properly sealed. | Ensure the charging port cover is always securely closed when not charging, especially in wet conditions. The flashlight is water resistant (IPX4), not waterproof. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Rechargeable Flashlight |
| Part Number | 039800138903 |
| Brand | Eveready |
| Light Source Type | LED |
| Brightness | 500 Lumens (High Mode) |
| Beam Distance | Up to 200 meters |
| Power Source | Battery Powered (Lithium Ion) |
| Battery Type | Non-removable 1865 Lithium Ion |
| Charging | Micro USB |
| Material | Aluminum body, Plastic components |
| Water Resistance Level | IPX4 (Water Resistant) |
| Product Dimensions (LxWxH) | 1.3"D x 1.57"W x 6.34"H (approx.) |
| Item Weight | 0.15 Kilograms (approx.) |
| Included Components | Rechargeable Flashlight, Micro USB Charging Cable, Lanyard |
Warranty
The manufacturer states that the warranty description for this product is "Not applicable." Please refer to your retailer's return policy for details on returns or exchanges.
Support
For further assistance or inquiries, please visit the official Eveready website: www.energizer.com.
This product is manufactured for/fabricated by/fabricado para: Energizer Brands, LLC, St. Louis, MO 63141. Energizer Canada Inc., Mississauga, Ontario L5N 6J5.
