KFD 65W Power Supply Charger Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your KFD 65W Power Supply Charger. This charger is designed to provide reliable power for compatible Jackery Portable Explorer 160, 240, E160, E240, and Honda HLS 290 power stations. Please read this manual thoroughly before use and retain it for future reference.

Image 1.1: KFD 65W Power Supply Charger. This image displays the main power adapter unit with its attached DC output cable and the detachable AC input cable.

2. Safety Information

Your KFD power supply charger is manufactured with safety as a priority and meets various international standards. Adhere to the following safety guidelines:

• The product is UL/CE/FCC/RoHS certified, indicating compliance with safety and environmental standards.
• Features built-in protection mechanisms:
• OVP (Over Voltage Output Protection): Prevents damage from excessive output voltage.
• OCP (Over Current Output Protection): Safeguards against damage from excessive output current.
• SCP (Short Circuit Output Protection): Protects against short-circuit conditions.
• Ensure the charger is used in a well-ventilated area to prevent overheating.
• Do not expose the charger to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the charger to strong impacts.
• Do not attempt to disassemble or modify the charger.

Image 2.1: Multiple Safety Protection. This diagram illustrates the internal components and safety features of the KFD charger, including current, voltage, temperature, and overcurrent protection.

Image 2.2: UL Listed Plug. This image shows the AC input plug, highlighting its UL certification for electrical safety.

3. Package Contents

The package includes the following items:

• 1 x KFD 65W AC Charger for Jackery Portable Explorer 160/240 Power Station
• 1 x US Power Cable

4. Compatibility

This KFD 65W Power Supply Charger is specifically designed for the following models:

• Jackery Portable Power Station Explorer 160 (G00167AAH, 167Wh)
• Jackery Portable Power Station Explorer 240 (G00240AAH, 240Wh)
• Jackery Portable Power Station Explorer E160
• Jackery Portable Power Station Explorer E240
• Honda by Jackery HLS 290 (HLS-290, HLS290, G00290RDH, 292Wh)

Important Note: This charger is NOT compatible with Jackery 300, 500, 1000, 1500, or 2000 Power Stations. It only supports devices requiring 20V 3.25A (65W max). Do not use with power stations that require 90W or 180W chargers.

Image 4.1: Compatibility Chart. This chart visually indicates which Jackery Portable Explorer models (160, 240, E160, E240) are compatible with this charger and which models (300, 500, 1000, 1500, 2000) are not.

5. Specifications

Image 5.1: Charger Dimensions. This image provides a visual representation of the charger unit, indicating its length, width, and height.

6. Setup Instructions

1. Connect the AC Power Cable: Insert the included US power cable into the AC input port of the KFD 65W power adapter.
2. Plug into Wall Outlet: Plug the other end of the AC power cable into a standard 100-240V wall outlet.
3. Connect to Power Station: Locate the DC input port on your compatible Jackery Portable Explorer 160/240/E160/E240 or Honda HLS 290 power station. Insert the barrel connector from the KFD charger's output cable firmly into this port.

Image 6.1: DC Connector. This image shows a close-up of the charger's DC barrel connector and how it connects to the power input port of a Jackery Explorer 240 power station.

Image 6.2: Charger Connected. This image illustrates the KFD charger properly connected and charging a Jackery Explorer 240 power station.

7. Operating Instructions

Once the charger is properly connected to both the wall outlet and your power station, the charging process will begin automatically. Most power stations will indicate charging status via their display or indicator lights.

• Monitor your power station's display to confirm it is receiving power and charging.
• Disconnect the charger from the power station and the wall outlet once charging is complete or if the power station is not in use.

8. Maintenance

• Cleaning: Use a dry, soft cloth to clean the charger. Do not use liquid cleaners or solvents.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. When storing, coil the cables neatly to prevent kinks or damage.
• Inspection: Periodically inspect the charger and cables for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.

9. Troubleshooting

• Charger Not Providing Power:
  • Ensure both the AC power cable and the DC output cable are securely connected.
  • Verify the wall outlet is functional by testing it with another device.
  • Confirm your power station model is listed as compatible in Section 4. This charger is not compatible with Jackery 300/500/1000/1500/2000 models.
  • Check if your power station requires a higher wattage charger (e.g., 90W or 180W). This charger provides 65W.
• Charger Overheating:
  • Ensure the charger is used in a well-ventilated area and not covered.
  • Confirm that the power station being charged is compatible and does not exceed the charger's specifications. Using an incompatible device can cause excessive heat.
  • If overheating persists, discontinue use and contact support.
• Loose Connection:
  • If the DC connector feels loose in the power station's port, ensure it is fully inserted. If the issue persists, verify the power station's port is not damaged.

10. Warranty and Support

This KFD product comes with a 36-month warranty and offers 30 days free exchange. This warranty covers manufacturing defects and ensures the product meets its stated specifications under normal use.

For technical support, warranty claims, or any questions regarding the use of your KFD 65W Power Supply Charger, please refer to the contact information provided with your purchase or visit the official KFD website.