Overview
The mophie Powerstation Go Rugged AC is a versatile portable power solution designed to keep your devices charged and your vehicle running. Equipped with a 55.5 mWh internal battery, it features two USB-A ports and a 65W AC port for charging various electronics, from smartphones and tablets to laptops and small appliances. Beyond personal devices, it functions as a portable car jump starter for full-sized vehicles like cars, trucks, and boats, including shock-proof jumper cables for safe operation. An integrated LED floodlight and intuitive LCD display enhance its utility in emergency situations. Its rugged design and compact size make it an ideal companion for travel, outdoor adventures, or everyday emergencies.
What's in the Box
- powerstation - mophie jump starter
- AC Wall Plug
- Jumper Cables
- Charging Cable (USB-C Cable)
- Carrying Pouch
- Quick-Start Guide
Product Features
55.5 mWh Internal Battery
Equipped with a robust 55.5 mWh internal battery, providing ample power for various needs.
65W AC Power Port
Features a 65W AC port to power laptops, tablets, and other small electrical appliances.
Dual USB-A Ports
Two USB-A ports allow simultaneous charging of smartphones, tablets, and other USB-enabled devices.
Portable Car Jump Starter
Capable of jump-starting full-sized vehicles like cars, trucks, and boats with included mini jumper cables.
Intuitive LCD Display
Easy-to-read display shows battery level, voltage, and safety checks.
Bright LED Floodlight
Built-in LED floodlight for illumination in low-light conditions or emergencies.
Setup Instructions
Initial Charging
- Connect the included AC wall plug to the powerstation's charging port.
- Plug the AC wall plug into a standard wall outlet.
- Allow the powerstation to charge completely until the LCD display shows 100%.
Connecting Jumper Cables
- Locate the jump start port on the powerstation.
- Plug the mini jumper cables into the jump start port. Ensure a secure connection. The cables are designed to fit only one way to prevent incorrect polarity.
Operating Instructions
Charging Devices via USB-A Ports
- Connect your device's USB charging cable to one of the two USB-A output ports on the powerstation.
- The powerstation will automatically begin charging your device. Monitor the device's charging status.
Powering Devices via 65W AC Port
- Open the protective cover for the 65W AC output port.
- Plug your device's AC power adapter into the AC port.
- Press the AC power button to activate the AC output. The LCD display will indicate AC power is active.
- Ensure your device is compatible with 65W AC power.
Jump Starting a Vehicle
- Ensure the powerstation is fully charged.
- Connect the mini jumper cables to the powerstation's jump start port.
- Connect the red (positive) clamp to the vehicle's positive battery terminal.
- Connect the black (negative) clamp to the vehicle's negative battery terminal or a grounded part of the vehicle chassis.
- Press the jump start button on the powerstation. Wait for the indicator light to turn solid green.
- Start your vehicle. Once started, immediately disconnect the jumper cables from the vehicle battery, then from the powerstation.
Video: An overview of the mophie Powerstation Go Rugged AC, demonstrating its various features including charging devices and jump-starting a vehicle. The video highlights its portability and ease of use in emergency situations.
Using the LED Floodlight
- Press the floodlight button to turn on the LED light.
- Press the button again to cycle through different light modes (e.g., bright white, red, flashing red).
- Press and hold the button to turn off the floodlight.
Using the Air Compressor (for models with this feature)
The mophie Powerstation Go Rugged AC may include an integrated air compressor for inflating tires or other inflatables. Refer to the quick-start guide for specific instructions on connecting the air hose and setting desired pressure.
Video: A demonstration of using the mophie Powerstation Go to inflate a car tire with its built-in air compressor. The video shows the connection process and setting the desired PSI.
Video: This video showcases the mophie Powerstation Go's air compressor functionality, including inflating a car tire and other items, emphasizing its versatility.
Maintenance
- Keep the powerstation clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Store the powerstation in a cool, dry place away from direct sunlight and extreme temperatures.
- For optimal battery life, fully charge the powerstation every 3 months, even if not in use.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
Troubleshooting
Device Not Charging
- Ensure the charging cable is securely connected to both the powerstation and the power source.
- Verify that the wall outlet is functional.
- Check if the powerstation itself has sufficient charge.
Vehicle Not Jump Starting
- Confirm the jumper cables are correctly connected to the vehicle battery terminals (red to positive, black to negative).
- Ensure the powerstation has adequate charge for jump starting.
- Check for any error messages on the LCD display and consult the quick-start guide for their meaning.
Specifications
| Feature | Detail |
|---|---|
| Brand | mophie |
| Product Dimensions | 3.34"D x 6.14"W x 1.42"H |
| Item Weight | 1.66 pounds |
| Internal Battery Capacity | 55.5 mWh |
| USB-A Ports | 2 |
| AC Port Output | 65W |
| Battery Cell Composition | Lithium Polymer |
| Voltage | 12 Volts |
| Special Features | Emergency tool, iPad charger, iPhone charger, jump starter, laptop charger |
| Color | Black |
| Item Model Number | 401107033 |
Warranty and Support
mophie products are designed for reliability and performance. For detailed warranty information, product registration, or technical support, please visit the official mophie website or refer to the warranty card included in your product packaging. You can also contact mophie customer service directly for assistance with any issues or questions.
