Nerf Ultra Select Fully Motorized Blaster

Introduction

The Nerf Ultra Select Fully Motorized Blaster is designed for high-performance dart blasting, offering the flexibility to choose between distance and accuracy. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.

Safety Information

WARNING: Small parts may be generated. Not for children under 3 years.

Always use official Nerf Ultra darts. Do not modify darts or blaster. Always wear eyewear (not included) when using this blaster. Do not aim at eyes or face. Adult supervision is recommended.

What's in the Box

• Nerf Ultra Select Blaster
• 2 x 10-dart clips
• 10 x Nerf Ultra distance darts
• 10 x Nerf Ultra accuracy darts
• Instructions

Image: The Nerf Ultra Select Blaster, showcasing its design and the included distance and accuracy darts, along with the two 10-dart clips.

Setup

1. Battery Installation

The Nerf Ultra Select Blaster requires 6 x 1.5V C alkaline batteries (not included). To install:

1. Locate the battery compartment on the blaster.
2. Using a Phillips head screwdriver (not included), unscrew the battery compartment cover.
3. Insert 6 C batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Replace the cover and tighten the screw.

2. Loading Darts and Clips

The blaster comes with two types of darts: Nerf Ultra distance darts (black with orange tips) and Nerf Ultra accuracy darts (white with red tips). Each clip holds 10 darts.

1. Load 10 Nerf Ultra distance darts into one clip.
2. Load 10 Nerf Ultra accuracy darts into the other clip.
3. Insert both loaded clips into the designated slots on the blaster. Ensure they click securely into place.

Operating Instructions

1. Powering Up and Firing

1. Hold down the acceleration button (located below the trigger) to power up the blaster's motor. You will hear the motor whirring.
2. While holding the acceleration button, press the trigger to fire darts.

2. Switching Dart Types

The Nerf Ultra Select Blaster features a selector on the blaster that allows you to switch between the two loaded clips, enabling you to choose between distance and accuracy darts during play.

1. To switch between clips, slide the selector mechanism located on the front grip of the blaster.
2. Ensure the selector is fully engaged with the desired clip before firing.

3. Loading During Play

The clips are designed to allow darts to be loaded into them even while they are still attached to the blaster. This minimizes downtime during intense play.

Image: A user demonstrating the aiming posture with the Nerf Ultra Select Blaster.

Image: A user holding the Nerf Ultra Select Blaster, ready for action.

Maintenance

1. Cleaning

Wipe the blaster with a damp cloth to remove dust and dirt. Do not submerge the blaster in water or use harsh chemicals.

2. Dart Care

Inspect darts regularly for damage. Bent or torn darts may affect performance and cause jams. Replace worn darts with official Nerf Ultra darts.

3. Battery Replacement

If the blaster's performance decreases (e.g., darts not firing as far or motor sounding weak), it may be time to replace the batteries. Follow the battery installation steps in the Setup section.

Troubleshooting

• Blaster not firing: Ensure batteries are correctly installed and have sufficient charge. Check that the acceleration button is fully pressed. Verify that darts are properly loaded into the clips and the clips are fully inserted into the blaster.
• Dart feeding issues/jams: Ensure only official Nerf Ultra darts are used. Check darts for damage or deformation. Remove any jammed darts carefully from the dart path. Ensure clips are fully inserted and the selector is correctly aligned with the active clip.
• Reduced firing distance: This may indicate low batteries or worn darts. Replace batteries or darts as needed.

Specifications

Warranty and Support

For warranty information or product support, please contact Hasbro customer service. You can also refer to the official user manual PDF for additional details: Download User Manual (PDF).