weelye 2.4G Bluetooth Remote Control and JR1922RXS Receiver Kit Instruction Manual

1. Product Overview

This manual provides instructions for the installation, pairing, and operation of the weelye 2.4G Bluetooth Remote Control and JR1922RXS Receiver Kit, designed for children's electric ride-on cars. This kit includes a receiver control box and a 2.4G Bluetooth remote control.

Image 1.1: weelye JR1922RXS Receiver Control Box. This image shows the top view of the black receiver unit with connection ports and product labeling.

Image 1.2: weelye 2.4G Bluetooth Remote Control. This image displays the white remote control with directional, speed, and brake buttons.

2. Setup Instructions

2.1 Remote Control Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Using a screwdriver, loosen the screw to open the battery compartment cover.
3. Insert two AAA (1.5V) batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Replace the battery compartment cover and tighten the screw.

Image 2.1: Diagram illustrating the battery compartment location and correct insertion of two AAA (1.5V) batteries into the remote control.

2.2 Pairing the Remote Control with the Receiver

1. Ensure the remote control has fresh batteries installed.
2. Turn off the power switch on the children's electric ride-on vehicle.
3. On the remote control, simultaneously hold down the ▲ (Forward) and ▼ (Back) keys for 3 to 5 seconds to initiate the pairing process. The first LED on the remote will begin to flicker.
4. While the LED is flickering, turn on the power switch of the electric vehicle.
5. The red indicator lights on the remote control will stop flashing, indicating that the pairing process is successful.

3. Operating Instructions

3.1 Remote Control Functions

Once paired, the remote control allows full operation of the electric ride-on car:

• S Key: Press this key to set the speed mode.
  • 1 LED lit: Low speed
  • 2 LEDs lit: Medium speed
  • 3 LEDs lit: High speed
• ▲ Key: Press to move the vehicle forward.
• ▼ Key: Press to move the vehicle backward.
• ◄ Key: Press to turn the vehicle left.
• ► Key: Press to turn the vehicle right.
• P Key: Press and hold this key to engage the brake. All LEDs on the remote will flicker while the brake is active.

4. Maintenance

4.1 Battery Care and Safety

• Non-rechargeable batteries are not to be recharged.
• Do not mix different types of batteries or new and used batteries.
• Batteries must be inserted with the correct polarity.
• Exhausted batteries should be removed from the toy promptly.
• The supply terminals are not to be short-circuited.

5. Troubleshooting

5.1 Remote Control Not Responding / Vehicle Not Moving

• Check Batteries: Ensure the remote control batteries are correctly installed and not depleted. Replace if necessary.
• Re-pair Remote: Follow the pairing instructions in Section 2.2 to re-establish the connection between the remote and the receiver.
• Vehicle Power: Confirm the electric ride-on car's power switch is turned on and its battery is charged.
• Receiver Connection: Verify that the JR1922RXS receiver is properly connected to the vehicle's wiring harness.

6. Specifications

7. Safety Warnings

WARNING! Not for children under 3 years. Contains small parts which may present a choking hazard.

• Always supervise children when operating the electric ride-on car.
• Ensure all connections are secure before use.
• The packaging contains important information and should be retained for future reference.

8. Warranty and Support

For warranty information or technical support regarding your weelye 2.4G Bluetooth Remote Control and JR1922RXS Receiver Kit, please refer to the product packaging or contact the manufacturer directly through their official website or customer service channels. Please have your model number (JR1922RXS) and purchase details ready when contacting support.