ReplacementScrews Bed Frame Cam Wheel Locks

Product Overview

These ReplacementScrews cam wheel locks are designed as direct replacements for IKEA Part 114670. They are essential components for securely assembling and maintaining various IKEA bed frames, ensuring a stable and sturdy structure. This manual provides detailed instructions for installation, compatibility information, and product specifications.

Image: A pack of four ReplacementScrews cam wheel locks, designed for IKEA bed frames.

Key Features

• Perfect Replacement: Fully compatible with IKEA part number 114670.
• Correct Size: Features a 35mm (approximately 1-1/2 inches) diameter, ensuring proper fit for designated bed frames. Not to be confused with smaller 25mm cams.
• Durable Construction: Engineered for strength to provide a stable and sturdy connection.
• Easy Installation: Designed for straightforward insertion and tightening with an Allen key.

Image: A close-up view of a cam wheel lock, highlighting its 35mm diameter and double-spiral profile for secure joining.

Compatibility

These cam wheel locks are specifically designed to be compatible with IKEA Part 114670. Verify your bed frame's assembly manual to confirm this part number. Compatible IKEA bed frame models include, but are not limited to:

• MALM Series: (e.g., 702.494.84, 691.762.85, 904.048.17, 402.494.90, 090.115.13)
• BRIMNES Series: (e.g., 902.737.84, 791.296.08, 904.702.56)
• SONGESAND Series: (e.g., 403.725.31, 592.410.69, 103.725.61, 092.409.77)
• BJORKSNAS Series: (e.g., 204.016.19, 892.475.74)
• TYSSEDAL Series: (e.g., 502.963.63, 690.579.80, 902.963.61)
• FLEKKE Series: (e.g., 703.201.35)

Always consult your original furniture assembly manual to ensure the correct part number is required for your specific model.

Image: A visual representation of the cam locks' compatibility with various IKEA bed frame models, including MALM, BRIMNES, SONGESAND, FLEKKE, and TYSSEDAL.

Installation Instructions

Follow these steps to install the ReplacementScrews cam wheel locks into your compatible IKEA bed frame. An Allen wrench/key is required for installation.

1. Identify the Insertion Points: Locate the circular holes on your bed frame where the cam wheel locks are to be inserted. These are typically found on the bed frame's side rails or headboard/footboard connections.
2. Insert the Cam Lock: Gently push the cam wheel lock into the designated hole. Ensure it sits flush with the surface of the furniture piece.
3. Align and Tighten: Once the connecting bolt (not included, typically part of the bed frame) is in place and passes through the cam lock, use an Allen key to turn the cam lock. Turn it clockwise until it is fully tightened and the furniture pieces are securely joined. The cam lock's internal mechanism will grip the bolt, pulling the pieces together.
4. Verify Security: After tightening, gently test the connection to ensure it is firm and stable. Repeat for all necessary cam wheel locks.

Image: A person demonstrating the installation of a cam wheel lock into a bed frame component using an Allen key.

Maintenance

To ensure the longevity and stability of your bed frame, periodic maintenance of the cam wheel locks is recommended:

• Regular Inspection: Periodically check all cam wheel locks for any signs of loosening or damage.
• Retighten if Necessary: If any cam locks feel loose, use an Allen key to gently retighten them until secure. Avoid over-tightening, which can damage the furniture or the lock.
• Cleaning: Keep the cam locks free from dust and debris. A dry cloth is sufficient for cleaning.

Troubleshooting

If you encounter issues during installation or use, consider the following:

• Cam Lock Does Not Fit:
  • Ensure you have the correct part number (IKEA Part 114670) for your bed frame.
  • Verify the diameter of the cam lock is 35mm. Some IKEA furniture uses smaller 25mm cams.
• Connection Feels Loose:
  • Ensure the connecting bolt is properly inserted through the cam lock.
  • Retighten the cam lock with an Allen key until the connection is firm.
• Difficulty Turning Cam Lock:
  • Ensure the Allen key is fully seated in the cam lock's hexagonal recess.
  • Do not force the turn; check for any obstructions or misalignment of the connecting bolt.

Specifications

Warranty and Support

ReplacementScrews products are designed for quality and durability. For any questions regarding installation, compatibility, or product performance, please contact ReplacementScrews customer support. While specific warranty details are not provided in this manual, please refer to the product packaging or the official ReplacementScrews website for the most current warranty information and support options.

For further assistance, visit the ReplacementScrews Store on Amazon.