Kastar MH-2B-BATT10
Kastar BATT10 Battery Replacement User Manual
Model: MH-2B-BATT10
1. Introduction
This manual provides essential information for the safe and effective use of your Kastar BATT10 Battery Replacement. This product is designed to replace original BATT10, BATT-10, AVP13, and MID-AVP13 batteries in Midland T71, T75, T77, T79, and X-Talker series radios. Please read this manual thoroughly before installation and operation.
2. Product Specifications
| Battery Type | Ni-MH (Nickel-Metal Hydride) |
| Battery Voltage | 3.6V |
| Battery Capacity | 1200mAh |
| Dimensions (L x W x H) | 1.98" x 1.67" x 0.57" (50.29 x 42.4 x 14.37 mm) |
| Package Includes | 2-Pack Battery |
| Model Number | MH-2B-BATT10 |
| Environmental Protection | Hg/Cd/Pb free, DBCK steel shell |
3. Setup and Installation
Follow these steps to properly install the Kastar BATT10 battery into your compatible Midland radio.
- Power Off Device: Ensure your Midland radio is powered off before attempting battery installation or removal.
- Open Battery Compartment: Locate and open the battery compartment cover on your radio. Refer to your radio's original manual for specific instructions if needed.
- Remove Old Battery (if applicable): If replacing an existing battery, carefully remove it from the compartment.
- Insert New Battery: Orient the Kastar BATT10 battery pack according to the "UP" arrow and "INSERT WITH THIS SIDE OUT" label on the battery. Slide the battery into the compartment. The pull tab should be accessible for future removal.
- Secure Battery: Ensure the battery is seated firmly within the compartment.
- Close Compartment: Replace the battery compartment cover and secure it properly.

Image 1: Front view of a single Kastar BATT10 battery, showing the clear label with insertion instructions and model number.

Image 2: Side view of a Kastar BATT10 battery, highlighting the white fabric pull tab designed for easy removal.
4. Operating Instructions
The Kastar BATT10 battery is a rechargeable Ni-MH battery pack. Proper charging and usage are crucial for optimal performance and longevity.
4.1 Initial Charge
Before first use, fully charge the battery pack. This typically takes several hours depending on your radio's charging system. Refer to your radio's manual for specific charging times and indicators.
4.2 Charging
- Always use the charger provided with your Midland radio or a compatible charger designed for Ni-MH battery packs.
- Do not overcharge the battery. Disconnect the radio from the charger once the charging indicator shows a full charge.
- Avoid charging in extreme temperatures. Optimal charging occurs at room temperature.
4.3 Usage
- The battery provides 1200mAh capacity for extended operation of your radio.
- Performance may vary based on radio usage patterns (e.g., frequent transmission, backlight usage).
- Ni-MH batteries benefit from occasional full discharge cycles to prevent memory effect, though modern Ni-MH batteries are less prone to this.
5. Maintenance and Storage
Proper care and storage will extend the lifespan of your Kastar BATT10 battery.
- Cleaning: Keep battery contacts clean and dry. Use a clean, dry cloth to wipe off any dust or debris.
- Temperature: Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid storing in hot vehicles.
- Long-Term Storage: For extended storage, charge the battery to approximately 50-60% capacity. Recharge every 3-6 months to prevent deep discharge.
- Handling: Do not puncture, disassemble, or short-circuit the battery. Do not expose to water or fire.
- Recycling: This Ni-MH battery must be recycled or disposed of properly. Do not dispose of in household waste. Consult local regulations for battery recycling options.

Image 3: Two Kastar BATT10 battery packs, illustrating the product as a 2-pack.
6. Troubleshooting
If you encounter issues with your Kastar BATT10 battery, refer to the following common problems and solutions.
- Battery Not Charging:
- Ensure the battery is correctly inserted into the radio and the radio is properly connected to the charger.
- Verify the charger is functioning and connected to a power source.
- Check for any debris or corrosion on the battery and radio contacts. Clean if necessary.
- If the battery is new, ensure it has been fully charged initially.
- Short Operating Time:
- The battery may not be fully charged. Ensure a complete charge cycle.
- Battery lifespan naturally decreases over time and with usage cycles. Consider replacing if operating time significantly diminishes.
- Extreme temperatures can affect battery performance.
- Radio Not Powering On:
- Confirm the battery is fully charged and correctly installed.
- Test with another known-good battery if available to rule out a radio issue.
7. Safety Information
- Do not remove the plastic covering from the battery pack.
- Do not disassemble, crush, puncture, or short-circuit the battery.
- Do not expose the battery to high temperatures (above 60°C/140°F) or fire.
- Keep batteries away from children and pets.
- If battery fluid leaks, avoid contact with skin and eyes. Rinse immediately with water and seek medical attention.
- Use only with compatible devices as specified.
8. Warranty and Support
Kastar batteries are designed for reliability and performance. For product support, technical assistance, or warranty inquiries, please contact Kastar customer service through the retailer where the product was purchased or visit the official Kastar website.
Please retain your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.