Baseus LED Desk Lamp DGZG-0G Instruction Manual

1. Setup

Before first use, ensure the Baseus LED Desk Lamp is fully charged. The lamp features a built-in 2200mAh battery, which takes approximately 3 hours to fully charge. You can use the provided USB-C cable to connect the lamp to a compatible power source.

Figure 1: The Baseus LED Desk Lamp in its standard upright position.

The lamp is designed for portability and can be used while charging. The base is made of aluminum, providing stability. The lamp's arm can be adjusted from 0° to 180° to direct light as needed.

2. Operating Instructions

Power On/Off and Brightness Adjustment

The lamp features a touch-sensitive control panel on its base. Tap the power button to turn the lamp on or off. To adjust brightness, press and hold the power button. The brightness will cycle through its range, release the button at your desired level.

Color Temperature Selection

The Baseus LED Desk Lamp offers 3 color temperature settings: warm light (3000K), mixed light (4500K), and cool light (6000K). Tap the color temperature button (usually indicated by a sun icon or similar) to cycle through these options. Choose warm light for reading or bedroom, mixed light for living room or home, and cool light for office work.

Auto-Dimming Smart Feature

The lamp is equipped with an auto-dimming smart feature that intelligently senses the brightness of the room environment. This dynamically optimizes the room lighting balance for a smooth and eye-caring light experience. This feature helps prevent visual strain in dark environments by increasing brightness and reduces glare in bright environments by decreasing brightness.

Adjustable Angle and Illumination

The lamp's head can be adjusted from 0° to 180°, allowing you to direct the light precisely where it's needed. It provides a 47-inch wide rectangular illumination, covering a large desk area effectively. The center illuminance can reach up to 940 Lux.

3. Maintenance

To ensure the longevity and optimal performance of your Baseus LED Desk Lamp, follow these general maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the lamp's surface. Avoid abrasive cleaners or solvents that may damage the finish.
• Storage: When not in use for extended periods, store the lamp in a cool, dry place. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan.
• Battery Care: Recharge the lamp fully when the battery is low. Avoid completely draining the battery frequently, as this can reduce its overall lifespan. The built-in 2200mAh battery is designed for long-lasting use.

No specific user-replaceable parts are designed for routine maintenance. For any internal repairs or battery replacement, it is recommended to contact customer support.

4. Troubleshooting

If you encounter any issues with your Baseus LED Desk Lamp, please refer to the following common troubleshooting steps:

• Lamp not turning on: Ensure the lamp is charged. Connect it to a power source using the USB-C cable and allow it to charge for at least 15-30 minutes before attempting to turn it on again.
• Brightness issues: If the brightness is too low or too high, try manually adjusting it by pressing and holding the power button. If the auto-dimming feature is active, ensure the ambient light sensor is not obstructed.
• Charging issues: Verify that the USB-C cable is securely connected to both the lamp and the power adapter. Try using a different USB-C cable or power adapter to rule out faulty accessories.
• Unresponsive touch controls: Ensure your fingers are clean and dry when operating the touch controls. If the issue persists, try restarting the lamp by turning it off and on.

If these steps do not resolve the problem, please contact Baseus customer support for further assistance.

5. Specifications

6. Warranty

Specific warranty information for the Baseus LED Desk Lamp (Model DGZG-0G) is not provided in the product details. Please refer to the product packaging or contact Baseus customer support for detailed warranty terms and conditions.

7. Support

For any questions, technical assistance, or support regarding your Baseus LED Desk Lamp, please contact Baseus customer service. You can also visit the official Baseus store for more information and product updates.

Baseus Official Store: Visit Baseus Store on Amazon

Baseus is committed to humanized design and product quality, striving to achieve the

Related Documents - DGZG-0G

	Baseus Eye Series Smart LED Desk Lamp - User Manual Detailed user manual for the Baseus Eye Series Smart LED Desk Lamp (DGZG-02/DGZG-0G), featuring auto-dimming, adjustable color temperature, stepless brightness control, high CRI, and a 2200mAh battery. Includes product features, specifications, part names, safety warnings, and maintenance instructions.
	Baseus Smart Eye Lampka biurkowa Instrukcja obsługi Instrukcja obsługi lampki biurkowej Baseus Smart Eye - ładowalnej, składanej lampki LED. Dowiedz się o jej funkcjach, specyfikacjach, instalacji, obsłudze, środkach ostrożności i konserwacji.
	Baseus Magnetic Stepless Dimming Charging Desk Lamp Pro (PB2738Z) - Technical Specifications and Test Report Technical specifications and test report details for the Baseus Magnetic Stepless Dimming Charging Desk Lamp Pro, model PB2738Z. This document outlines product requirements, test methods, and compliance judgments.
	Baseus Smart Eye Series Folding Reading Desk Lamp User Manual User manual for the Baseus Smart Eye Series Charging Folding Reading Desk Lamp (Model PB2977Z-P0A3), detailing its features, operation, specifications, and safety compliance.
	Baseus i-wok Series USB Stepless Dimming Screen Hanging Light - Operation Manual Comprehensive operation manual for the Baseus i-wok Series USB Stepless Dimming Screen Hanging Light, covering product description, installation, usage, specifications, and precautions.
	Baseus I-Wok Pro Monitor Lamp DGIWK-P01 User Manual Comprehensive user manual for the Baseus I-Wok Pro monitor lamp (Model DGIWK-P01). Includes setup instructions, operating guide, product specifications, and essential safety precautions for optimal use.