TOPDON Phoenix Plus Scanner User Manual

2. Operating Instructions

2.1 Main Interface Overview

The Phoenix Plus features an intuitive Android 10.0 based interface. Key functions are easily accessible from the main screen, including Scan, Services, ADAS, Module, Update, Support, Library, History, Feedback, and User Info.

2.2 Smart AutoVIN & AutoScan

The AutoVIN feature automatically identifies vehicle information (make, model, year) upon connection, streamlining the diagnostic process. AutoScan performs a full scan of all available ECU modules, quickly pinpointing faults across systems like ECM, TCM, ABS, SRS, BCM, and more.

Image: The Phoenix Plus 2 tablet showing a topology map of vehicle systems and a screen demonstrating the AutoVIN function, highlighting its ability to quickly identify vehicle information.

2.3 ECU Coding & Online Coding

This function allows you to reprogram adaptive data, customize vehicle settings, and deactivate unneeded functions. It supports online coding for brands like Audi, VW, Skoda, Seat, Hyundai, Kia, and offline coding for BMW, Toyota, and others. This includes features like disabling auto start-stop or changing chimes.

Image: The Phoenix Plus 2 tablet showing options for ECU Coding and Online Coding, including matching new ECUs, customizing OE settings, enabling/disabling features, and rewriting adaptive data.

2.4 Bi-directional Control (Active Tests)

Perform active tests by sending commands to ECUs to control actuators and components directly. This helps in accurately locating faults by testing components like ABS pumps, throttle bodies, HVAC components, fuel pumps, and more in real-time.

Image: The Phoenix Plus 2 tablet displaying active test options, with visual examples of functions like turning lights on/off, airbag verification, suspension monitoring, O2S test, and aligning steering sensors.

2.5 41+ Hot Service Functions

The Phoenix Plus offers a wide range of maintenance and reset services, including but not limited to:

• Oil Reset: Reset service lamp after oil change.
• Injector Coding: Write new codes for correct cylinder injection.
• SAS Reset: Reset steering angle to zero.
• DPF Regeneration: Maintain Diesel Particulate Filter.
• BMS Reset: Register new battery after replacement.
• Throttle Adaptation: Initialize throttle actuators.
• AdBlue Reset: Reset AdBlue system.
• EPB Reset: Replace and reset brake pads.
• TPMS Reset: Recalibrate Tire Pressure Monitoring System.
• ABS Bleeding: Remove air from ABS brake lines.
• Suspension Reset: Adjust vehicle body height sensor.
• Gear Learning: Reset transmission for smoother shifting.
• A/F Reset: Adjust air-fuel ratio.
• Airbag Reset: Reset airbag system after fault repair.

Image: A visual representation of several hot maintenance services available on the Phoenix Plus 2, including DPF Regeneration, EGR, Injector Coding, Oil Reset, SAS Reset, EPB Reset, TPMS Reset, Throttle Adaptation, BMS Reset, and ABS Bleeding.

2.6 V.A.G Guided Function

For Volkswagen, Audi, Skoda, and Seat vehicles, the V.A.G Guided Function provides step-by-step procedures, simplifying complex diagnostics and repairs by guiding you through the process without needing security access codes or channel numbers.

Image: The Phoenix Plus 2 tablet showing the V.A.G Guided Function interface, illustrating a streamlined, step-by-step diagnostic process for compatible vehicles.

2.7 FCA AutoAuth Gateway Access

The Phoenix Plus scanner is certified to access the Secure Gateway Module (SGW) on 2017 and newer FCA vehicles (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat). This allows for OE-level diagnostics and bi-directional control on these protected vehicles. An AutoAuth subscription is required and must be connected to the internet.

Image: The Phoenix Plus 2 tablet displaying the FCA AutoAuth Gateway Access feature, indicating secure and reliable diagnostics for compatible Chrysler, Fiat, Dodge, and Jeep vehicles.

2.8 Topology Mapping

The intuitive color-coded topology display visualizes all major car systems in a diagrammatic tree, allowing for a quick overview of module structures and conditions. This feature significantly aids in efficient troubleshooting.

Image: The Phoenix Plus 2 tablet showing a topology map of vehicle systems and a screen demonstrating the AutoVIN function, highlighting its ability to quickly identify vehicle information.

3. Maintenance

3.1 General Care and Cleaning

Keep the Phoenix Plus scanner clean and free from dust and debris. Use a soft, dry cloth for cleaning the screen and exterior. Avoid using abrasive cleaners or solvents that could damage the device. Store the device in its protective case when not in use to prevent physical damage.

3.2 Battery Maintenance

To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if it will be stored for an extended period. The 12600mAh battery is designed for long operational periods.

3.3 Software Updates

Regularly check for and install software updates. Updates provide bug fixes, add new vehicle coverage, and introduce new features, ensuring your scanner remains current and effective. Updates are available via Wi-Fi.

4. Troubleshooting

4.1 Common Issues and Solutions

• Device not powering on: Ensure the battery is charged. Connect the power adapter and try again.
• No communication with vehicle:
  • Verify the MDCI dongle is securely connected to the vehicle's OBDII port.
  • Ensure the vehicle's ignition is on.
  • Check Bluetooth connection between the tablet and the MDCI dongle.
  • Confirm vehicle compatibility for the specific function you are trying to perform.
• Software functions not working as expected:
  • Ensure the software is up to date.
  • Verify vehicle compatibility for the specific function.
  • For FCA vehicles, ensure your AutoAuth subscription is active and the device is connected to the internet.

4.2 Software Updates After Free Period

You will not lose bi-directional control and coding functions if you do not purchase updates after the initial two free years. The updates primarily provide bug fixes and add new vehicle coverage. Your existing functions will continue to work with the last installed software version.

4.3 Receiving a Damaged or Used Product

If you receive a product that is broken or appears used, please contact TOPDON customer support immediately for assistance. They will arrange for a replacement unit.

5. Specifications

6. Warranty and Updates

The TOPDON Phoenix Plus Scanner comes with a 1-year product assurance. Additionally, it includes 2 years of free software updates from the date of purchase. These updates ensure your device has the latest vehicle coverage and features. After the free update period, the device's existing functions will continue to operate with the last installed software version.

7. Support

For technical assistance, product inquiries, or warranty claims, please contact TOPDON customer support. TOPDON provides lifetime free technical support for the Phoenix Plus scanner.

You can typically find support contact information on the official TOPDON website or within the device's "Support" or "User Info" sections.

Image: Illustration of customer support representatives, symbolizing the availability of expert service and support.