Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your VIVOHOME Vanity Set, model VH914-WH. Please read all instructions carefully before assembly and use to ensure safe and proper functionality.
Image: The VIVOHOME Vanity Set, featuring a white dressing table with a large mirror framed by 12 LED light bulbs, a spacious drawer, and a matching stool.
Safety Information
- Ensure all components are securely fastened during assembly. Loose parts can cause instability.
- Do not exceed the maximum weight capacity of the stool, which is 264.6 lbs (120 kg).
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Place the vanity on a flat, stable surface to prevent tipping.
- Avoid exposing the vanity to excessive moisture or direct sunlight to prevent damage to the material.
Package Contents
Before beginning assembly, verify that all parts are present and undamaged. Refer to the assembly video for visual identification of components.
- Wooden panels for the table and mirror frame
- Stool components (panels and cushion)
- 12 LED light bulbs with wiring and switch
- Drawer slides and hardware
- Assembly hardware (screws, dowels, cam locks, etc.)
- Instruction manual (this document)
Setup and Assembly
Follow the steps outlined in the official assembly video for a smooth setup process. A Phillips head screwdriver is required for assembly.
Video: Official VIVOHOME assembly guide for the Vanity Set with Lighted Mirror and Large Drawer. This video demonstrates the step-by-step process of constructing the vanity table and stool, including attaching the mirror and installing the LED lights.
- Assemble the Stool: Connect the stool panels using the provided screws and dowels. Attach the cushioned seat securely.
- Assemble the Main Table Structure: Fasten the side panels to the base and top panels using cam locks and screws. Ensure all connections are tight.
- Install Drawer Slides: Attach the drawer slides to the inner sides of the table frame and to the drawer box itself.
- Assemble the Drawer: Construct the drawer box using the designated panels and hardware. Insert the assembled drawer into the installed slides.
- Attach the Mirror Frame: Secure the mirror frame to the top of the vanity table using the appropriate hardware.
- Install LED Light Bulbs: Insert each LED bulb into its designated socket around the mirror frame. Connect the wiring as shown in the video, ensuring all connections are secure.
Operating Instructions
The VIVOHOME Vanity Set features integrated LED lighting for optimal illumination during use.
- LED Lights: To turn the 12 LED lights on or off, locate the ON/OFF button on the power cord. Press the button to toggle the lights. Ensure the USB cable is connected to a power source (e.g., a USB wall adapter, not included).
- Drawer: The large drawer provides storage for cosmetics and accessories. Pull the drawer gently to open and push to close. The mute slide rails ensure smooth and quiet operation.
Image: A hand pressing the ON/OFF button on the power cord for the 12 LED lights, demonstrating how to control the illumination of the vanity mirror.
Maintenance
Proper care will extend the life and appearance of your vanity set.
- Cleaning: Wipe the surfaces with a dry cloth. For more stubborn marks, use a damp cloth and then immediately dry the surface. Avoid abrasive cleaners or harsh chemicals.
- Mirror Care: Clean the mirror with a glass cleaner and a soft, lint-free cloth.
- Light Bulbs: If an LED bulb needs replacement, ensure the power is disconnected before attempting to remove or install a new bulb.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on or flicker. | Loose connection, faulty power source, or damaged wiring/bulbs. | Ensure the USB cable is fully inserted into a working power source. Check all bulb connections. If issues persist, contact customer support. |
| Drawer does not open/close smoothly or is misaligned. | Improperly installed drawer slides or obstruction. | Verify that the drawer slides are correctly aligned and securely fastened. Check for any objects obstructing the drawer's path. |
| Stool feels wobbly or unstable. | Loose assembly hardware. | Tighten all screws and connections on the stool. Ensure it is placed on a level surface. |
Specifications
- Model Number: VH914-WH
- Brand: VIVOHOME
- Frame Material: Engineered Wood
- Product Dimensions: 31.5 x 15.7 x 55.1 inches (79.5 x 39.9 x 140 cm)
- Item Weight: 69.5 pounds (31.5 kg)
- Stool Weight Capacity: 264.6 lbs (120 kg)
- Mirror Thickness: 12mm
- Tabletop Thickness: 15mm
- Assembly Required: Yes
- Color: Hollywood-white
Image: A detailed diagram illustrating the various dimensions of the VIVOHOME Vanity Set, including height, width, and depth of the table and stool.
Warranty and Support
For any defects or issues with your VIVOHOME Vanity Set, please contact customer service. Be aware of the weight limits for the stool as outlined in the safety information.
For further assistance, please visit the official VIVOHOME store or contact their customer support directly.
