Introduction
Thank you for choosing the JIELI Remote Control for your chain-driven sliding gate opener. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the remote control.
Safety Information
- This remote control is designed exclusively for JIELI chain-driven sliding gate openers. Do not attempt to use it with other brands or types of gate openers.
- Keep the remote control out of reach of children to prevent accidental operation of the gate.
- Do not expose the remote control to water, extreme temperatures, or direct sunlight for prolonged periods.
- If the remote control is damaged, discontinue use immediately and contact customer support.
- Ensure the gate area is clear of people, pets, and obstructions before operating the gate.
Package Contents
- 1 x JIELI Wireless Remote Control
- 1 x Backup Key (pre-installed battery)
Product Overview
The JIELI remote control features a compact design with four distinct buttons for comprehensive gate control. It also includes a non-slip sliding cover and a convenient keychain for portability.
Front view of the remote control, showing the JIELI logo and sliding cover.
Back view of the remote control, revealing the four control buttons: Open, Close, Stop, and Lock.
The remote control provides a reliable operating distance of 100-165 feet (approximately 30-50 meters), ensuring convenient access to your gate.
Setup
Battery Installation
The JIELI remote control comes with a pre-installed A-type alkaline battery. No initial battery installation is required for first use.
Pairing the Remote Control
To pair your new remote control with your JIELI gate opener, follow these steps:
- Locate the "STU" button on your JIELI gate opener unit.
- Press and hold the "STU" button on the gate opener for approximately 2 seconds.
- Immediately after releasing the "STU" button, press and hold the "Open" button on your new remote control.
- Continue holding the "Open" button on the remote until you hear a beep sound from the gate opener. This indicates successful pairing.
Clearing All Paired Remote Controls
To clear all previously paired remote controls from your JIELI gate opener, follow these steps:
- Locate the "STU" button on your JIELI gate opener unit.
- Press and hold the "STU" button on the gate opener.
- Continue holding the "STU" button for approximately 8 seconds until you hear a beep sound. This indicates that all remote controls have been cleared from the gate opener's memory.
Operating Instructions
The JIELI remote control features four primary functions:
- Open Button: Press to open the gate.
- Close Button: Press to close the gate.
- Stop Button: Press to stop the gate's movement at any point.
- Lock Button: Press to lock the gate, preventing unauthorized operation.
The remote control allows for convenient operation of your JIELI gate opener from a distance.
Maintenance
Battery Replacement
When the remote control's range decreases or it becomes unresponsive, it may be time to replace the battery. The remote uses one A-type alkaline battery. Refer to the remote's casing for instructions on how to open it and replace the battery.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Low or dead battery. | Replace the battery. |
| Remote not responding. | Remote not paired or pairing lost. | Re-pair the remote control following the "Pairing the Remote Control" instructions. |
| Reduced operating range. | Low battery or environmental interference. | Replace the battery. Ensure no large metal objects or strong radio signals are obstructing the path. |
| Gate opener not responding to any remote. | All remotes cleared from gate opener memory. | Re-pair all desired remote controls. |
Specifications
| Feature | Detail |
|---|---|
| Brand | JIELI |
| Model Compatibility | Only compatible with JIELI Gate Openers |
| Number of Buttons | 4 (Open, Close, Stop, Lock) |
| Operating Distance | 100-165 feet (approx. 30-50 meters) |
| Connectivity Technology | Radio Frequency |
| Battery Type | 1 x A-type Alkaline battery (included) |
| Item Weight | 1.07 ounces (approx. 30 grams) |
| Product Dimensions | 2.5 x 1.57 x 0.59 inches (approx. 6.35 x 3.99 x 1.5 cm) |
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your JIELI gate opener or visit the official JIELI website. If you encounter any issues not covered in this manual, please contact JIELI customer service for assistance.
