1. Product Overview
The NOKLEAD Digital Kitchen Timer is designed for precision timing in various settings, from cooking to studying. Its large LED display ensures clear visibility, while adjustable volume and brightness settings cater to individual preferences and environments. The timer supports both countdown and count-up modes, offering flexibility for different tasks.


2. Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- 1 x NOKLEAD Digital Kitchen Timer
- 3 x AAA Batteries
- 1 x User Manual (this document)
3. Setup
3.1 Battery Installation
The timer requires 3 AAA batteries for operation. These are included in the package.
- Locate the battery compartment cover on the back of the timer.
- Slide the cover open.
- Insert the 3 AAA batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.

3.2 Placement Options
The NOKLEAD Digital Kitchen Timer offers multiple convenient placement options:
- Desktop Stand: Utilize the integrated foldable stand on the back to place the timer upright on any flat surface, such as a kitchen counter, desk, or bedside table.
- Magnetic Back: The strong magnetic back allows you to attach the timer securely to metallic surfaces like refrigerators, ovens, or whiteboards.
- Hanging Hole: A small hole is provided for hanging the timer on a hook or nail.

4. Operating Instructions
The timer features intuitive controls for easy operation.

4.1 Setting the Timer (Countdown Mode)
To set a countdown time:
- Press the M button to set the desired minutes (0-99). Each press increases the minutes by one. Hold to rapidly increase.
- Press the S button to set the desired seconds (0-59). Each press increases the seconds by one. Hold to rapidly increase.
- Once the desired time is set, press the SP/ST button to start the countdown.
- To pause the countdown, press SP/ST again. Press again to resume.
- When the countdown reaches zero, the alarm will sound (unless muted).
4.2 Using as a Stopwatch (Count-Up Mode)
To use the timer as a stopwatch:
- Ensure the timer display shows 00:00. If not, press the CLEAR button to reset it.
- Press the SP/ST button to start counting up.
- To pause the stopwatch, press SP/ST again. Press again to resume.
- To reset the stopwatch to 00:00, press the CLEAR button.
4.3 Resetting the Timer
At any point, you can press the CLEAR button to reset the timer to 00:00.
4.4 Memory Function
After a countdown ends and the alarm sounds, pressing any button on the top of the timer will recall the last time setting. This is useful for repeating the same timing duration.
4.5 Adjusting Volume
The timer offers three volume levels: Loud, Soft, and Mute.
- Loud (80-90dB): Easily audible even from a distance.
- Soft (60-75dB): Suitable for quieter environments or when used by children.
- Mute (Numbers Blink): The display numbers will blink when the time is up, with no audible alarm.
To cycle through volume levels, locate the volume switch on the side of the timer and slide it to your desired setting.

4.6 Adjusting Brightness
The timer features two levels of brightness for its LED display:
- High Brightness: For maximum visibility.
- Dim Brightness (ECO Mode): For extended battery life and less distraction in low-light conditions.
To switch between brightness levels, use the brightness switch located on the side of the timer. In ECO mode, the display will automatically turn off after 5 seconds of no operation to conserve power.
5. Maintenance
To ensure the longevity and optimal performance of your NOKLEAD Digital Kitchen Timer, please follow these maintenance guidelines:
- Cleaning: Wipe the timer with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, but ensure no moisture enters the device. Do not use abrasive cleaners or solvents.
- Storage: Store the timer in a cool, dry place when not in use.
- Battery Replacement: Replace batteries promptly when the display dims or the timer malfunctions. Remove batteries if the timer will not be used for an extended period to prevent leakage.
6. Troubleshooting
If you encounter any issues with your timer, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low batteries; Timer in ECO mode and turned off. | Replace batteries; Press any button to wake up the display or switch out of ECO mode. |
| Alarm is not sounding. | Volume set to Mute. | Adjust the volume switch to Loud or Soft. |
| Buttons are unresponsive. | Low batteries; Temporary software glitch. | Replace batteries; Remove and reinsert batteries to perform a soft reset. |
| Timer counts incorrectly. | Rare internal error. | Remove batteries for 1 minute, then reinsert. If problem persists, contact support. |
7. Specifications
- Model Number: NK5268 Küchentimer
- Colour: White
- Product Dimensions: 2.5 x 8.9 x 6.6 cm (0.98 x 3.5 x 2.6 inches)
- Item Weight: 85 g (3 oz)
- Power Source: 3 x AAA Batteries (included)
- Timing Range: 00:00 to 99:59 (Minutes:Seconds)
- Display: Large LED, 4 inches screen size
- Brightness Levels: 2 (High, Dim/ECO)
- Volume Levels: 3 (Loud: 80-90dB, Soft: 60-75dB, Mute)

8. Safety Warnings
Please read and adhere to the following safety warnings to prevent damage to the product or injury:
- Do not disassemble the timer or touch any internal parts.
- Do not wipe or scratch the screen with hard objects.
- Do not use the product in or near water, nor in areas with high humidity.
- Keep the timer away from heat sources, such as radiators, stoves, or heaters.
9. Warranty and Support
NOKLEAD provides a standard warranty for this product against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase.
For warranty claims, technical support, or any questions regarding your NOKLEAD Digital Kitchen Timer, please contact the seller or manufacturer directly through your purchase platform. Please have your order number and product model (NK5268 Küchentimer) ready when contacting support.
Manufacturer: ShenZhen YuanGuangHao Electronics Co.,Ltd
Address: No.7,LianYi Street,TangKeng Rd,HengGang St, LongGang Dist,ShenZhen,GuangDong,China.
EU Importer: Yuan Li
Address: Mittenhuber Straße 4, 92318 Neumarkt
UK Importer: EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business Centre, TaffsWell, Cardiff, Wales, CF15 7QR
Email: contact@evatmaster.com





