wanwaytech G18

WanWayTech G18 GPS Tracker User Manual

Real-time Tracking Device for Vehicle Management

1. Introduction

Thank you for choosing the WanWayTech G18 GPS Tracker. This device is designed to provide reliable real-time positioning and comprehensive vehicle management solutions. It is suitable for various applications including car rental, UBI insurance, and fleet management. This manual will guide you through the setup, operation, and maintenance of your G18 GPS Tracker.

2. Product Overview

The G18 GPS Tracker is a compact and robust device equipped with advanced features for precise tracking and monitoring. It supports 2G GSM networks and offers a wide range of functionalities to ensure the safety and efficient management of your assets.

WanWayTech G18 GPS Tracker and mobile app interface

Figure 2.1: WanWayTech G18 GPS Tracker and a mobile application displaying device overview and alarm statistics.

3. Package Contents

Please verify that all items are present in your package:

  • G18 Real-time Positioning Device (x1)
  • Wiring Harness (x1)
  • Warranty Card (x1)
  • User Manual (x1)
  • Car/Truck Relay (x1) - Standard 12V relay included. Other voltages (24V, 48V, 60V, 72V, 84V) are available upon request.

4. Specifications

Detailed technical specifications for the G18 GPS Tracker:

Table of G18 GPS Tracker parameters and hardware specifications

Figure 4.1: Detailed parameters and hardware specifications of the G18 GPS Tracker.

G18 GPS Tracker Technical Specifications
CategoryParameterValue
GeneralDimensions (L×W×H)85mm × 24mm × 14mm
Weight27g
Working Temperature-25°C to 75°C
Working Voltage9-90V
Built-in Battery55mAh
HardwareLocation Accuracy<=10m
GPS ChipMTK
GSM Frequency850/900/1800/1900MHz
Hot Start (Open Sky)<5 seconds
Warm Start<30 seconds
Cold Start (Open Sky)<40 seconds
GPS Sensitivity-144dBm
Tracking Sensitivity-160dBm
Network & AntennasCommunication TypeTCP/IP
GSM AntennaLDS Antenna
GPS AntennaBuilt-in 18mm*18mm*2mm Ceramic Antenna
Software FeaturesOTA UpgradeSupported
ACC DetectionSupported
Geo-fenceSupported
Cut-wire AlarmSupported
Vibration AlarmSupported
Movement AlarmSupported

5. Setup and Installation

5.1 SIM Card Installation

The G18 GPS Tracker requires a 2G (GSM) SIM card for network communication. Please ensure your local area supports 2G networks before installation. The SIM card is not included in the package.

  1. Carefully open the casing of the G18 device.
  2. Insert the 2G GSM SIM card into the designated SIM card slot. Ensure the SIM card is inserted correctly according to the diagram or markings on the device.
  3. Close the casing securely.
Exploded view of G18 GPS Tracker showing internal components and SIM card slot

Figure 5.1: Exploded view of the G18 GPS Tracker, illustrating the internal components and the SIM card insertion point.

5.2 Wiring Diagram

The G18 is a four-wire device. Proper wiring is crucial for its functionality, including power supply and remote cut-off features. Refer to the diagram below for correct installation.

Wiring diagram for G18 GPS Tracker with relay connection

Figure 5.2: Wiring diagram for the G18 GPS Tracker, including connections for power (Red, Black), ACC (Orange), and the relay for petrol/electricity cut-off (Yellow, White).

  • Red Wire (+): Connect to the positive terminal of the vehicle's battery (constant 9-90V power).
  • Black Wire (-): Connect to the negative terminal of the vehicle's battery or chassis ground.
  • Orange Wire (ACC): Connect to the vehicle's ACC (Accessory) wire, which receives power when the ignition is on.
  • Yellow Wire (Petrol On/Off): Connect to the relay's control input for remote fuel/power cut-off. The relay should be wired to interrupt the fuel pump or ignition circuit.

Important: Ensure all connections are secure and insulated to prevent short circuits. If you are unsure about the wiring, please consult a professional installer.

6. Operating Instructions

6.1 Accessing the Tracking Platform

The G18 GPS Tracker can be monitored and managed through the WanWay Track platform, accessible via web browser or mobile application.

WanWay Track platform interface on desktop and mobile, with QR code for app download

Figure 6.1: Overview of the WanWay Track platform on desktop and mobile devices, showing real-time tracking and device management features. A QR code is provided for easy app download.

  • Web Platform: Access the WanWay Track platform via your web browser.
  • Mobile App: Download the "WanWayTrack" app from the App Store (iOS) or Google Play (Android). You can also use this direct download link: WanWayTrack App Download.

Test Account: You can test the platform and app using the following credentials:

  • Account: wanway
  • Password: wanway123

6.2 Real-time Tracking

Once the device is installed and connected to the platform, it will update its position every 10 seconds, providing continuous real-time tracking.

6.3 Trace Playback

The platform allows you to review the historical trace of your vehicle, which can be useful for analyzing routes and past movements.

7. Key Features and Alarms

The G18 GPS Tracker offers a comprehensive suite of features designed for enhanced security and management:

G18 GPS Tracker with a list of key features and various vehicle types it can track

Figure 7.1: The G18 GPS Tracker highlighting its main features and compatibility with various vehicle types such as cars, motorcycles, trucks, school buses, excavators, taxis, and vans.

  • Real-time Tracking: Continuous position updates every 10 seconds.
  • Trace Playback: Review historical routes and movements of the vehicle.
  • User-Defined Geo-fence: Set virtual boundaries on the map. Receive alarms via app or SMS when the device enters or exits the pre-set area.
  • Over-speed Alarm: Notifies the platform when the vehicle exceeds a pre-defined speed limit.
  • Light Sensor & Disassembly Alarm: Sends an alarm notification if the device is tampered with or removed.
  • Remotely Cut-off Petrol/Electricity: Remotely control the vehicle engine via the platform, app, or SMS to prevent unauthorized driving.
  • Vibration Alarm: Sends an alarm notification if the vehicle experiences destructive behavior or strong vibrations.
  • Rapid Acceleration/Deceleration Alarm: Detects and alerts on aggressive driving behaviors.
  • Movement Alarm: Sends an alarm notification if the vehicle is moved or towed away without authorization.
  • Low Power Alarm: Notifies when the device's internal battery is low.
  • Driver Behavior Analysis: Provides insights into driving habits, helping to determine if the driver is operating the vehicle safely.

8. Troubleshooting

If you encounter issues with your G18 GPS Tracker, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device not online on platformNo SIM card, incorrect SIM card installation, no 2G network coverage, SIM card without data plan, incorrect wiring.Ensure SIM card is inserted correctly and has an active 2G data plan. Verify 2G network availability in the area. Check all wiring connections according to the diagram.
Inaccurate positioningWeak GPS signal, device installed in a shielded location (e.g., under metal).Relocate the device to an area with a clear view of the sky. Ensure no metal objects are directly above the device.
Alarms not triggeringAlarm settings not configured, device not powered correctly, sensor malfunction.Verify alarm settings on the platform/app. Check power supply. Contact support if issue persists.
Remote cut-off not workingIncorrect relay wiring, relay malfunction, vehicle ignition is on.Review the wiring diagram for the relay connection. Ensure the vehicle's ignition is off before attempting remote cut-off. Test the relay independently if possible.

If the problem persists after attempting these solutions, please contact WanWayTech technical support.

9. Maintenance

The G18 GPS Tracker is designed for low maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Regular Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid Extreme Conditions: Do not expose the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
  • Secure Installation: Periodically check that the device is securely mounted and all wiring connections are intact and not damaged.
  • Software Updates: Ensure your device firmware and tracking platform software are up-to-date for the best performance and latest features. Updates are typically managed automatically or through the platform.

10. Warranty and Support

WanWayTech is committed to providing high-quality products and excellent customer service.

10.1 Lifetime Support

WanWayTech offers lifetime technical support for the G18 GPS Tracker. If you have any questions, encounter issues, or require assistance, please do not hesitate to contact our online technical support team. You can find our after-sales service card with contact details in the product box.

10.2 Platform Fees

The WanWay Track platform is free to use for the first year. After the initial year, a data plan is required for continued use. Options include:

  • Monthly Plan: Starting at $1 USD/month (paid monthly). All features included. Cancel anytime.
  • Yearly Plan: $10 USD/year (paid yearly).
  • Lifetime Plan: $20 USD for lifelong access.

These fees cover platform access and data usage for continuous tracking with position updates every 10 seconds and GPS accuracy of less than 5 meters.

© 2024 WanWayTech. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.