Retro-Bit RET00244

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Retro-Bit Legacy 16 Wireless 2.4GHz Controller User Manual

Model: RET00244 | Brand: Retro-Bit

1. Introduction

The Retro-Bit Legacy 16 Wireless 2.4GHz Controller combines classic design with modern functionality, offering versatile compatibility across multiple platforms. Enjoy a seamless gaming experience on your Super Nintendo, Nintendo Switch, PC, MacOS, RetroPie, Raspberry Pi, and other USB-enabled devices.

2. Package Contents

Retro-Bit Legacy 16 Wireless 2.4GHz Controller
SNES Original Port Receiver
USB 2.4 GHz Receiver
USB-C Charging Cable (Note: Micro-USB for SNES receiver updates, not included)
Instruction Manual

3. Product Overview

Familiarize yourself with the controller's layout and features:

Retro-Bit Legacy 16 Controller and Receivers

Figure 3.1: Retro-Bit Legacy 16 Wireless Controller with SNES and USB Receivers.

Side view of Retro-Bit Legacy 16 Controller

Figure 3.2: Side view showing the ergonomic design and shoulder buttons.

Close-up of Home and Screenshot buttons on Retro-Bit Legacy 16 Controller

Figure 3.3: Close-up of the Home and Screenshot buttons, located above the Select and Start buttons.

Close-up of ZL and ZR shoulder buttons on Retro-Bit Legacy 16 Controller

Figure 3.4: Additional ZL and ZR shoulder buttons for enhanced gameplay.

The controller features a classic D-pad, A/B/X/Y action buttons, Select and Start buttons, dual analog sticks, and additional ZL/ZR shoulder buttons. It also includes dedicated Home and Screenshot buttons for modern console compatibility.

4. Setup

4.1 Charging the Controller

The controller charges via a USB-C port located on the top edge. Connect the provided USB-C cable to the controller and a compatible USB power source. The LED indicators on the controller will show charging status.

4.2 Connecting to Devices

The Retro-Bit Legacy 16 controller comes with two receivers for broad compatibility:

4.2.1 SNES Original Port Receiver

Plug the SNES Original Port Receiver into an available controller port on your Super Nintendo console. The controller will automatically pair with the receiver.

4.2.2 USB 2.4 GHz Receiver

Plug the USB 2.4 GHz Receiver into a standard USB-A port on your Nintendo Switch dock, PC, MacOS device, RetroPie, Raspberry Pi, or other USB-enabled system. The controller will automatically pair with the receiver.

Important Note for Nintendo Switch Users:

Before pairing with Nintendo Switch, ensure "Pro Controller Wired Communication" is enabled in your Switch system settings for optimal performance.

Video 4.1: Official product video demonstrating the features and compatibility of the Legacy 16 Wireless Controller, including its use with SNES, Switch, and USB-enabled devices. This video highlights the dual receivers and various button functions.

5. Operating Instructions

5.1 Basic Controls

The controller features standard SNES-style button layout with modern additions:

D-Pad: For directional movement.
A, B, X, Y Buttons: Standard action buttons.
Select, Start Buttons: For in-game menu navigation and actions.
Dual Analog Sticks: For precise 3D movement and camera control.
L, R, ZL, ZR Shoulder Buttons: Additional triggers for modern games.
Home Button: Returns to console's home screen (e.g., Nintendo Switch).
Screenshot Button: Captures screenshots (e.g., Nintendo Switch).

5.2 Macro Functions (for USB® Receiver)

The controller supports various macro functions for enhanced compatibility and customization. Refer to the table below for specific commands:

Mode	Hold Input	Description
Input Switch	Start + B for 5 sec	Switch between D-Input and X-Input. Some consoles and programs require X-Input.
Default Mode	Start + Up	Sets the controller back to its default mode.
Swap AB/XY	Start + Down for 5 sec	Switches the A & B buttons with the X & Y buttons. Repeat input to reverse.
Swap L/ZL	L + ZL for 5 seconds	Switches the L & ZL buttons. Repeat input to reverse.
Swap R/ZR	R + ZR for 5 seconds	Switches the R and ZR buttons. Repeat input to reverse.

6. Maintenance

6.1 Firmware Updates

It is highly recommended to check and update your controller to the latest firmware before use for the best experience. Firmware updates for the receivers are done via Micro-USB (cable not included).

6.2 Battery Life and Charging

The controller features a Lithium Ion battery. A full charge typically takes 2-3 hours, providing extended playtime. The LED indicators on the controller will show charging status and battery level.

7. Troubleshooting

Connectivity Issues: Ensure the correct receiver is plugged in and the controller is paired. For Switch, verify "Pro Controller Wired Communication" is enabled.
Input Lag/Responsiveness: The controller is designed for minimal latency. If experiencing issues, ensure no strong 2.4GHz interference is present.
Button Feel: The buttons have a specific tactile feel. While some users may prefer a different actuation, this is a design characteristic and not a defect.
No Rumble/Force Feedback: This controller does not feature rumble or force feedback functionality.
Stick Drift: While not commonly reported, if stick drift occurs, try resetting the controller to default mode using the macro (Start + Up).

8. Specifications

Model Number: RET00244
Connectivity: 2.4 GHz Wireless
Compatibility: SNES, Nintendo Switch, PC, MacOS, RetroPie, Raspberry Pi, Other USB Devices
Battery: Lithium Ion (included)
Charging Port: USB-C (controller), Micro-USB (SNES receiver for updates)
Product Dimensions: 6.34 x 1.97 x 3.98 inches
Item Weight: 5.43 ounces

9. Warranty & Support

For warranty information, technical support, or further assistance, please visit the official Retro-Bit website or contact their customer service. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.