Introduction
This manual provides instructions for the installation, operation, and maintenance of your Larson Certified Storm Door White Georgian Lever Handle. This surface-mount hardware is designed for storm doors, offering a stylish and ergonomically friendly rotating lever for convenient use. It features a no lock-out mechanism, automatically unlocking when exiting to prevent accidental lock-outs. This handle set is suitable for use with wood, metal, or vinyl doors.
Image: The Larson Certified Storm Door White Georgian Lever Handle, showcasing its design and white finish.
Setup and Installation
Before beginning installation, ensure you have all included components: outside handle, inside handle, strike plate, spindles, fasteners, and spacers. You will need a Phillips head screwdriver and a tape measure.
Tools Required:
- Phillips Head Screwdriver
- Tape Measure
Installation Steps:
- Prepare the Door: If replacing an existing handle, remove the old hardware. Clean the door surface where the new handle will be mounted.
- Check Spacing: Verify the center-to-center spacing on your storm door. This handle is designed for standard spacing, typically around 1.8 inches.
- Install Outside Handle: Position the outside handle on the exterior side of the door. Ensure it is level and aligned with any existing holes or marks.
- Insert Spindles: Insert the appropriate spindle(s) through the door and into the outside handle mechanism. The kit includes various spindle lengths and spacers to accommodate different door thicknesses (e.g., 3/4 inch to 1 1/8 inch). Select the spindle that provides a secure fit without excessive play.
- Install Inside Handle: Place the inside handle on the interior side of the door, aligning it with the spindle(s) and the outside handle.
- Secure Handles: Use the provided fasteners to secure both the outside and inside handles to the door. Tighten screws firmly but do not overtighten to avoid damaging the door or hardware.
- Install Strike Plate: Mount the strike plate on the door frame, aligning it with the latch mechanism of the handle. Ensure the door latches smoothly and securely when closed. Adjust the strike plate position as needed.
- Test Operation: Open and close the door several times, testing the lever action and latching mechanism to ensure smooth and proper function.
Image: All components included with the Larson Storm Door Handle, including the outside and inside handles, strike plate, spindles, fasteners, and spacers.
Operating Instructions
The Larson Georgian Lever Handle is designed for simple and reliable operation.
- Opening from Exterior: Depress the lever handle downwards to retract the latch and open the storm door.
- Opening from Interior: Depress the lever handle downwards to retract the latch and open the storm door.
- Latching: Simply close the storm door. The latch will automatically engage with the strike plate, securing the door.
- No Lock-Out Feature: This handle is equipped with a no lock-out feature. When exiting, the handle automatically unlocks, preventing situations where you might accidentally lock yourself out.
Maintenance
To ensure the longevity and appearance of your Larson Storm Door Handle, follow these simple maintenance guidelines:
- Cleaning: Regularly wipe the handle with a soft, damp cloth to remove dust and dirt. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Lubrication: If the lever action becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch mechanism. Do not use oil-based lubricants, as they can attract dirt.
- Fastener Check: Periodically check all mounting screws and fasteners to ensure they are tight. Loose fasteners can affect the handle's performance and durability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Handle is loose or wobbly. | Mounting screws are loose. | Tighten all visible mounting screws on both the interior and exterior handles. |
| Latch does not engage or disengage smoothly. |
|
|
| Lever is stiff or hard to press. | Lack of lubrication or internal friction. | Apply silicone-based lubricant to the moving parts of the lever mechanism. |
| Spindle appears too short for the door thickness. | Incorrect spindle length selected or door thickness exceeds standard range. | Ensure the correct spindle and spacers are used for your door's thickness. If the door is unusually thick, contact Larson customer support for assistance or alternative solutions. |
Specifications
- Model: LARSON - CH3010301
- Brand: Larson
- Color: White
- Material: Zinc
- Style: Georgian
- Product Dimensions: 1"L x 1"W (Handle base)
- Center To Center Spacing: 1.8 Inches
- Handle Attachment Mechanism: Screws/Bolts
- Included Components: Outside and inside handles, strike plate, spindles, fasteners, spacers
- Door Compatibility: Wood, metal, or vinyl doors (3/4 inch to 1 1/8 inch thick)
- Special Features: Easy to Install, No lock-out feature
- Item Weight: Approximately 1 pound (16 ounces)
- UPC: 092304172644
Warranty Information
The Larson Certified Storm Door White Georgian Lever Handle is warrantied to be free of defects in material and workmanship for a period of one year from the date of original purchase. To claim warranty service, notification by the owner to Larson Manufacturing and proof of purchase are required.
For detailed warranty terms and conditions, please refer to the official Larson Manufacturing website or contact customer support.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Larson Manufacturing customer service.
- Online Support: Visit the official Larson Store on Amazon for product information and resources.
- Contact Information: Refer to the packaging or the official Larson Manufacturing website for current contact details (phone number, email).
