BESTTEN Almond Dimmer Light Switch User Manual
Model: LUXDMWK600-12-3
For Dimmable LED, Halogen, and Incandescent Bulbs
1. Product Overview
The BESTTEN Almond Dimmer Light Switch is designed to provide adjustable lighting levels for various bulb types. It supports both single-pole and 3-way applications and includes a decorator wall plate. This dimmer features a memory function to recall the last dimmed setting and an adjustable dimming range to prevent flickering.
Figure 1: BESTTEN Almond Dimmer Light Switch with included wall plate.
2. Package Contents
- Dimmer Switches
- Screws
- Wallplates
3. Safety Information
- WARNING: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring.
- Install in accordance with all national and local electrical codes.
- Use only with compatible dimmable bulbs (LED, CFL, Incandescent, Halogen).
- Do not use with non-dimmable bulbs or motor-driven appliances like fans.
- Only one dimmer switch can be installed in a 3-way circuit.
4. Installation Instructions
4.1 Wiring for Single-Pole Application
A single-pole application controls a light fixture from one location. Ensure power is off before proceeding.
Figure 2: Single-pole wiring diagram. Connect the hot wire to the silver screw, the load wire to the brass screw, and the ground wire to the green screw. No neutral wire is required.
4.2 Wiring for 3-Way Application
A 3-way application controls a light fixture from two locations. Only one dimmer switch can be installed in a 3-way circuit. Ensure power is off before proceeding.
Figure 3: 3-way wiring diagram. Connect the hot wire to the silver screw, the load wire to one brass screw, and the traveler wire to the other brass screw. Connect the ground wire to the green screw. No neutral wire is required.
4.3 Dimming Range Adjustment
This dimmer features an adjustable dimming range to optimize performance and eliminate flickering with various dimmable LED/CFL bulbs. Follow these steps to adjust the dimming range:
- Turn on the switch and move the slide dimmer to the lowest (leftmost) setting.
- Rotate (counter-clockwise) the sensitivity dial (located on the side of the switch) all the way up. NOTE: If the dial stops in either direction, do not force it.
- Rotate (clockwise) the sensitivity dial down slowly until the preferred lowest light level is achieved and the lights are not flickering.
Figure 4: Location of the sensitivity dial for dimming range adjustment.
Video 1: Demonstration of the dimming range setting process to eliminate flickering.
5. Operation
- On/Off: Press the top or bottom of the rocker switch to turn the lights on or off.
- Dimming: Use the horizontal slider to adjust the light intensity. Move the slider up for brighter light and down for dimmer light.
- Memory Function: The switch remembers the last dimmed light setting and will turn on to that exact light level when activated.
6. Compatibility
This dimmer switch is universally compatible with most dimmable LED, CFL, incandescent, and halogen bulbs.
- Dimmable LED/CFL: Up to 150 Watts (minimum load: 3W)
- Incandescent/Halogen: Up to 600 Watts
Figure 5: Bulb compatibility and wattage ratings.
7. Product Dimensions
Figure 6: Product dimensions. The switch measures approximately 4.13 x 2.12 x 1.35 inches. Ensure your electrical box has a depth of at least 2 inches for proper fit.
8. Specifications
| Feature | Specification |
|---|---|
| Operation Mode | ON-OFF |
| Current Rating | 15 Amps |
| Operating Voltage | 120 Volts |
| Contact Type | Wires |
| Connector Type | Crimp |
| Brand | BESTTEN |
| Switch Type | Dimmer |
| Terminal | Screw |
| Material | Polycarbonate, Brass (Contact Material) |
| Item Dimensions (L x W x H) | 4.13 x 2.12 x 1.35 inches |
| Circuit Type | 3-way (also supports Single-Pole) |
| Mounting Type | Wall Mount |
| Actuator Type | Rocker |
| Upper Temperature Rating | 40 Degrees Celsius |
| Wattage (Dimmable LED/CFL) | Max. 150W (Min. Load: 3W) |
| Wattage (Incandescent) | Max. 600W |
| Color | Almond |
| International Protection Rating | IP20 |
| Specification Met | UL |
| Model Number | LUXDMWK600-12-3 |
9. Troubleshooting
- Flickering Lights: If your lights are flickering, rotate the side adjustment wheel (sensitivity dial) as described in Section 4.3 to fine-tune the dimming range. Dimmable LEDs may not dim the same as incandescent or halogen bulbs, and their dimming range can vary by manufacturer.
- Lights Not Turning On/Off Consistently (3-Way): In 3-way applications, ensure the line and load wires are correctly identified and connected. Incorrect wiring can cause inconsistent operation or flickering. Only one dimmer switch should be installed in a 3-way circuit.
- Switch Does Not Fit in Electrical Box: The dimmer switch has dimensions of 4.13 x 2.12 x 1.35 inches. Ensure your electrical box has a depth of at least 2 inches to accommodate the switch.
10. Maintenance
To clean the dimmer switch and wall plate, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
11. Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service. Keep your purchase receipt for proof of purchase.