1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Prity 12 kW Wood-Burning Fireplace with Oven, Model FM D. Please read these instructions carefully before installing or using the appliance. Retain this manual for future reference.
The Prity FM D is a freestanding wood-burning fireplace designed for heating and features an integrated oven for cooking. It is constructed from robust metal and is designed for use with wood and wood briquettes.
2. Safety Information
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the manufacturer.
- Always ensure adequate ventilation in the room where the fireplace is installed.
- Do not store flammable materials near the fireplace. Maintain recommended clearances to combustible materials.
- Only use approved fuels: dry wood and wood briquettes. Do not burn trash, plastics, treated wood, or any other unapproved materials.
- The fireplace surfaces become extremely hot during operation. Use protective gloves when handling. Keep children and pets away.
- Ensure the chimney and flue pipe are regularly inspected and cleaned by a qualified professional to prevent creosote buildup and chimney fires.
- Install a carbon monoxide detector in the vicinity of the appliance.
- Never leave the fireplace unattended while in operation.
- This appliance is designed for vented operation only. It is not a vent-free appliance and requires a proper chimney system.
3. Setup and Installation
Installation of this wood-burning fireplace must comply with all local and national building and fire codes. It is highly recommended that installation be performed by a qualified and certified professional.
3.1 Unpacking
Carefully remove the fireplace from its packaging. Inspect for any damage that may have occurred during transit. Report any damage to your retailer immediately.
3.2 Placement
The Prity FM D is a freestanding unit. It must be placed on a non-combustible floor protector that extends beyond the appliance according to local regulations. Maintain minimum clearances to combustible walls and materials as specified by local codes and the manufacturer's guidelines (refer to the technical specifications section for general dimensions).
Figure 1: Front and side view of the Prity wood-burning fireplace, illustrating its freestanding design and black metal finish. The two doors for the combustion chamber and oven are clearly visible.
3.3 Chimney Connection
The fireplace features a top flue pipe connection with a diameter of Ø 150 mm. Ensure the flue pipe is securely connected to the fireplace and extends into a properly sized and constructed chimney system. All connections must be sealed to prevent smoke leakage.
Figure 2: Interior view of the Prity fireplace with both the combustion chamber door and the oven door open. The oven rack, firebox grate, and ash pan are visible, demonstrating the internal structure for fuel loading and ash removal.
3.4 First Fire / Curing Process
The first few fires should be small to allow the paint and metal to cure properly. During this process, some smoke and odors may be emitted. Ensure the room is well-ventilated. Avoid high temperatures during the initial curing phase.
4. Operating Instructions
4.1 Fueling the Fireplace
- Open the combustion chamber door slowly.
- Place dry, seasoned wood or wood briquettes onto the grate. Do not overfill the combustion chamber.
- Use kindling and paper to start the fire.
- Once the fire is established, close the door securely.
Figure 3: The Prity 12 kW wood-burning fireplace with its integrated oven. The lower chamber shows a fire burning, illustrating the appliance in active heating mode. The upper compartment is the oven, equipped with a thermometer for temperature monitoring.
4.2 Air Control
The fireplace is equipped with air inlets to control the combustion process. Adjust these controls to regulate the burn rate and heat output. Fully open the air inlets when starting a fire or adding new fuel. Once the fire is burning strongly, you can partially close them to achieve a slower, more efficient burn.
4.3 Using the Integrated Oven
The upper compartment functions as an oven. It includes an integrated thermometer to monitor the internal temperature. The oven's temperature is influenced by the intensity of the fire in the combustion chamber below. Experiment with fire intensity and air control to achieve desired cooking temperatures.
4.4 Ash Removal
Regularly remove ash from the ash pan located beneath the combustion chamber. Allow the ashes to cool completely before disposal. Always place ashes in a metal container with a tight-fitting lid, away from combustible materials.
5. Maintenance
5.1 Cleaning
- Glass Cleaning: Use a specialized fireplace glass cleaner when the glass is cool. Do not use abrasive cleaners.
- Exterior Cleaning: Wipe the exterior with a damp cloth when the fireplace is cool. Do not use harsh chemicals.
5.2 Chimney and Flue Pipe Inspection
Have your chimney and flue pipe inspected and cleaned by a certified chimney sweep at least once a year, or more frequently if you burn wood continuously. This prevents creosote buildup, which can lead to chimney fires.
5.3 Gasket Seals
Periodically check the gasket seals around the combustion chamber and oven doors for wear and tear. Worn gaskets can lead to air leaks, reducing efficiency and potentially allowing smoke into the room. Replace them as needed.
6. Troubleshooting
- Smoke in the Room: Check for chimney blockages, insufficient draft, or improper flue pipe connection. Ensure doors are sealed.
- Poor Heat Output: Ensure you are using dry, seasoned wood. Check air control settings; too little air can lead to a smoldering fire. Verify chimney is clean.
- Difficulty Starting Fire: Ensure adequate kindling and proper air supply. Check for cold chimney or downdraft.
- Oven Not Heating: The oven temperature is directly related to the fire's intensity. Increase the fire's heat output by adding more fuel and adjusting air controls.
If problems persist, consult a qualified technician or your retailer.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Prity |
| Model Number | FM D |
| Nominal Power Output | 12 kW |
| Efficiency | 77.7 % |
| Flue Pipe Connection | Ø 150 mm (Top) |
| Product Dimensions (W x D x H) | 49 cm x 46 cm x 93 cm |
| Combustion Chamber Dimensions (W x D x H) | 41 cm x 36.3 cm x 31.5 cm |
| Oven Compartment Dimensions (W x D x H) | 33.2 cm x 41 cm x 19 cm |
| Approved Fuels | Wood, Wood Briquettes |
| Exhaust Gas Temperature | 226.7 °C |
| Required Draft Pressure | 12 Pa |
| CO Content in Exhaust Gas (at 13% O2) | 733.8 mg/Nm³ |
| Fine Particulates | 24 mg/Nm³ |
| NOX | 104.7 mg/Nm³ |
| OGC | 17.6 mg/Nm³ |
| Item Weight | 97 kg |
| Material | Metal |
| Color | Black |
| Energy Class | A |
| Installation Type | Freestanding |
| Compliance | BIMSCHV II |
Figure 4: The energy efficiency label for Prity fireplace models, including FM D, indicating an energy class of A and a nominal heat output of 12.0 kW. This label provides important information regarding the appliance's environmental performance.
8. Warranty and Support
Specific warranty details for the Prity 12 kW Wood-Burning Fireplace with Oven, Model FM D, may vary by region and retailer. Please refer to the warranty information provided at the time of purchase or contact your retailer for details regarding warranty coverage and claims.
For technical support, spare parts, or service inquiries, please contact your authorized Prity dealer or the point of purchase. Always provide your model number (FM D) and purchase date when seeking support.
