Moulinex Drive Belt 90S3M537 for Bread Makers

1. Introduction

This document provides essential information for the safe and correct installation and maintenance of your Moulinex Drive Belt, part number 90S3M537. This drive belt is a replacement part designed for specific Moulinex bread maker models. Please read this manual thoroughly before attempting any installation.

2. Safety Information

Always observe the following safety precautions when handling appliance parts:

Disconnect Power: Always ensure the bread maker is unplugged from the electrical outlet before attempting any installation, maintenance, or inspection.
Use Proper Tools: Utilize appropriate tools for disassembly and reassembly to prevent damage to the appliance or injury to yourself.
Professional Assistance: If you are unsure about any step or uncomfortable performing the installation, consult a qualified appliance technician.
Keep Away from Children: Small parts and tools should be kept out of reach of children.

3. Compatible Models

This drive belt (part number 90S3M537) is compatible with the following Moulinex bread maker models. Please verify your bread maker's model number, usually found on a label on the underside of the appliance, before proceeding with installation.

OW5000, OW5001, OW5002, OW5003, OW5004, OW5005, OW5006, OW5007
OW5020, OW5022, OW5023, OW5024, OW5031
OW6000, OW6002, OW6003
OW500030/3Z2 XXL, OW500030/B70 XXL, OW500030/B71 XXL, OW500030/B72 XXL, OW500030/B73 XXL, OW500030/B74 XXL, OW500030/B75 XXL, OW500030/B76 XXL, OW500030/B7A XXL
OW500031/B7 XXL, OW500032/B7 XXL, OW500032/B72/B7A XXL, OW50050/B7 XXL
OW500130/B70 XXL, OW500130/B71 XXL, OW500130/B72 XXL, OW500130/B73 XXL, OW500130/B74 XXL, OW500130/B75 XXL, OW500130/B76 XXL, OW500130/B7A XXL
OW500230/B70 XXL, OW500230/B71 XXL, OW500230/B72 XXL, OW500230/B73 XXL, OW500230/B7A XXL
OW500300/3Z0 XXL BAGUETTE, OW500300/B70 XXL BAGUETTE, OW500300/B71 XXL BAGUETTE, OW500300/B72 XXL BAGUETTE, OW500300/B73 XXL BAGUETTE, OW500300/B74 XXL BAGUETTE, OW500300/B7A XXL BAGUETTE
OW500315/B7 XXL BAGUETTE, OW500330/B7 XXL BAGUETTE, OW500330/B70 XXL BAGUETTE, OW500330/B72 XXL BAGUETTE, OW500330/B7A XXL BAGUETTE
OW500331/B70 XXL BAGUETTE, OW500331/B71 XXL BAGUETTE, OW500331/B72 XXL BAGUETTE, OW500331/B73 XXL BAGUETTE, OW500331/B7A XXL BAGUETTE
OW500332/B70 XXL BAGUETTE, OW500332/B71 XXL BAGUETTE, OW500332/B72 XXL BAGUETTE, OW500332/B73 XXL BAGUETTE, OW500332/B7A XXL BAGUETTE
OW500333/B70 XXL BAGUETTE, OW500333/B71 XXL BAGUETTE, OW500333/B7A XXL BAGUETTE
OW500350/B7 XXL BAGUETTE, OW500350/B7A XXL BAGUETTE, OW500351/B7 XXL BAGUETTE, OW500352/B7 XXL BAGUETTE, OW500352/B7A XXL BAGUETTE
OW500431/B7 XXL, OW500431/B71 XXL, OW500431/B7A XXL
OW500530/B70 XXL, OW500530/B71 XXL, OW500530/B72 XXL, OW500530/B73 XXL, OW500530/B7A XXL, OW500552/B7 XXL BAGUE

4. Installation Guide

This section provides general steps for replacing the drive belt. Specific disassembly procedures may vary slightly between bread maker models. Refer to your bread maker's original service manual if available.

4.1. Tools Required

Screwdriver set (Phillips and/or Torx, depending on model)
Pliers (optional, for stubborn connections)
Clean cloth

4.2. Step-by-Step Installation

Disconnect Power: Ensure the bread maker is unplugged from the electrical outlet before starting any work.
Access the Mechanism: Carefully turn the bread maker upside down. Locate and remove the screws securing the bottom panel. Gently remove the bottom panel to expose the internal components, including the motor and drive shaft.

Image: Example of the Moulinex Drive Belt 90S3M537. The actual appearance of the internal mechanism may vary by bread maker model.
Remove Old Belt: Identify the old drive belt connecting the motor pulley to the kneading paddle shaft pulley. Carefully remove the old belt. It may be worn, cracked, or broken.
Clean Area: Use a clean cloth to wipe away any bread crumbs, flour, or debris from the pulleys and surrounding area. Ensure the pulleys are free to rotate.
Install New Belt: Place the new Moulinex Drive Belt 90S3M537 onto the smaller motor pulley first. Then, carefully stretch and guide the belt onto the larger kneading paddle shaft pulley. Ensure the belt is seated correctly in the grooves of both pulleys.
Test Rotation: Manually rotate the kneading paddle shaft to ensure the belt moves smoothly and without obstruction. The motor pulley should also turn.
Reassemble: Carefully replace the bottom panel, ensuring all wires are clear and not pinched. Secure the panel with the screws removed earlier. Do not overtighten.
Final Check: Plug the bread maker back into the power outlet and perform a short test cycle (e.g., kneading cycle) to confirm proper operation of the new drive belt.

5. Maintenance

To ensure the longevity of your new drive belt and the optimal performance of your bread maker:

Regularly clean the interior of your bread maker, especially around the kneading shaft, to prevent debris from interfering with the belt.
Avoid overloading the bread maker, as excessive strain can prematurely wear out the drive belt.
If you notice unusual noises or inconsistent kneading, inspect the belt for signs of wear or damage.

6. Troubleshooting Common Issues

Symptom	Possible Cause	Solution
Kneading paddle not turning	Belt broken or slipped off	Inspect and replace/reposition belt
Grinding noise during kneading	Belt misaligned or worn	Check belt alignment; replace if worn
Motor runs but paddle doesn't move	Belt completely broken	Replace drive belt

7. Specifications

Part Number: 90S3M537
Type: Toothed Drive Belt
Length (closed): Approximately 260 mm
Brand: Moulinex
Manufacturer: Moulinex
ASIN: B08Y28CWZS

8. Warranty and Support

As a replacement part, this Moulinex drive belt is typically covered by a limited manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase.

For specific warranty details or technical support, please contact Moulinex customer service or refer to the warranty information provided with your original bread maker appliance.

You can find more information and contact details on the official Moulinex website.

	Manuel d'utilisation Machine à Pain Moulinex OW5000 Guide complet pour la machine à pain Moulinex OW5000, incluant les instructions de sécurité, les programmes de cuisson, les conseils pour réussir votre pain, et un guide de dépannage.
	Moulinex Home Bread Maker OW1101 User Manual Comprehensive user manual for the Moulinex Home Bread Maker OW1101, covering preparation, operation, safety instructions, ingredients, recipes, and troubleshooting.
	Manuel d'utilisation Moulinex OW2000 Machine à Pain Ce manuel d'utilisation détaillé pour la machine à pain Moulinex OW2000 fournit des instructions complètes sur l'utilisation, les programmes, les recettes, le dépannage et l'entretien pour préparer facilement du pain maison.
	Moulinex Dolci Ice Cream Maker User Manual: Recipes, Programs, and Troubleshooting Comprehensive user manual for the Moulinex Dolci ice cream maker. Learn to create homemade ice cream, gelato, sorbet, and frozen yogurt with detailed program guides, operational instructions, and troubleshooting advice.
	Consignes de Sécurité et Guide d'Utilisation pour Machine à Pain Moulinex Manuel de sécurité et d'utilisation pour la machine à pain Moulinex. Ce guide essentiel couvre les précautions d'emploi, l'utilisation sécuritaire, le nettoyage et les conseils environnementaux pour votre appareil.
	Moulinex HV4 Meat Grinder Instruction Manual Comprehensive user manual for the Moulinex HV4 meat grinder, detailing its features, accessories, usage, and cleaning instructions for optimal performance and safety.

Moulinex 90S3M537

Moulinex Drive Belt 90S3M537 Instruction Manual