1. Product Overview
The ZKTeco LX15 is a standalone biometric fingerprint attendance device designed for efficient time management in small offices and retail environments. It features a 2.8-inch TFT display for user-friendly operation and supports data download via USB without requiring complex network configurations or monthly fees.
Image: ZKTeco LX15 device highlighting its features including fingerprint recognition, user capacity, transaction capacity, USB communication, and in-built SSR report.
Key Features:
- Standalone Operation: No network configuration or monthly fees required. Features an in-built Self-Service-Recorder (SSR) function.
- User-Friendly Display: Equipped with a 2.8-inch TFT display for clear interface and easy data management.
- Advanced Fingerprint Recognition: High-sensitivity technology ensures accurate and secure employee identification.
- USB Host and Client Communication: Facilitates convenient data transfer to external storage devices or computers.
- Power-off Data Protection: Built-in backup system retains attendance records during power outages.
2. Setup Guide
2.1 Unpacking and Initial Inspection
Carefully remove the LX15 device from its packaging. Verify that all components are present and undamaged. The package should include the LX15 device, a power adapter, and a user manual.
2.2 Power Connection
- Connect the provided 5V power adapter to the device's power supply port.
- Plug the adapter into a standard electrical outlet.
- The device will power on automatically.
2.3 User Enrollment
Before employees can record attendance, their fingerprints or passwords must be enrolled into the device. The LX15 supports up to 500 users and 500 fingerprints.
Image: Visual guide for setting up the LX15, including user enrollment and data transfer.
To Enroll a Fingerprint:
- Press the MENU/M/OK button to access the main menu.
- Navigate to User Manage > New User.
- Enter a User ID.
- Select Enroll FP (Fingerprint).
- Place the user's finger on the fingerprint sensor three times, lifting it slightly between each scan, until enrollment is successful.
- Repeat for additional fingers or users.
To Enroll a Password:
- Follow steps 1-3 above to create a new user.
- Select Enroll PWD (Password).
- Enter a 6-8 digit password and confirm it.
3. Operation
3.1 Recording Attendance
Employees can record their attendance using either their enrolled fingerprint or password.
Image: The LX15 device demonstrating both fingerprint and password attendance modes.
Using Fingerprint:
Place an enrolled finger firmly on the fingerprint sensor. The device will confirm successful verification with a visual and audible prompt.
Using Password:
Enter your User ID, then press the M/OK button. Enter your password, then press M/OK again. The device will confirm successful verification.
3.2 Data Download
The LX15 features an in-built SSR (Self-Service-Recorder) function, allowing you to download attendance reports directly to a USB flash drive without needing additional software.
Image: The LX15 device demonstrating USB data download to a computer, generating an Excel report.
To Download Data via USB:
- Insert a USB flash drive (formatted to FAT32, 8GB recommended) into the device's USB port.
- Press the MENU/M/OK button.
- Navigate to Report > Download Report.
- Select the desired report type (e.g., Attendance Log) and date range.
- Confirm the download. The device will save the report in Excel format to the USB drive.
4. Maintenance
4.1 General Care
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to direct sunlight, high temperatures, or excessive moisture.
- Do not use abrasive cleaners or solvents on the device.
4.2 Data Protection and Backup
The LX15 includes a power-off data protection feature, ensuring that attendance records are retained even if power is lost. However, regular data backup to a USB drive is recommended to prevent any unforeseen data loss.
Image: The LX15 device illustrating its power-off data protection feature, ensuring data integrity.
4.3 Fingerprint Sensor Cleaning
If fingerprint recognition accuracy decreases, gently clean the fingerprint sensor surface with a soft, lint-free cloth. Avoid using liquids directly on the sensor.
5. Troubleshooting
5.1 Device Not Powering On
- Ensure the power adapter is securely connected to both the device and a working power outlet.
- Verify that the power outlet is supplying power. Try plugging in another device.
5.2 Fingerprint Recognition Failure
- Ensure the finger is clean and dry.
- Place the finger firmly and completely on the sensor.
- Try enrolling the fingerprint again if issues persist.
- Clean the fingerprint sensor surface as described in Section 4.3.
5.3 USB Data Download Issues
- Ensure the USB flash drive is formatted to FAT32.
- Check that the USB drive is properly inserted into the device's USB port.
- Try using a different USB flash drive (8GB recommended).
- Ensure there is sufficient space on the USB drive.
5.4 Incorrect Time/Date
- Access the device menu and navigate to System Settings > Date/Time to adjust.
6. Specifications
Image: Detailed specifications table for the ZKTeco LX15 device.
| Feature | Specification |
|---|---|
| Algorithm Version | ZKFinger VX 10.0 |
| User Capacity | 500 |
| Fingerprint Capacity | 500 |
| Transaction Capacity | 50,000 |
| Display | 2.8-inch TFT Screen |
| Power Supply | 5V 800mA |
| Communication | USB Host/Client |
| Standard Functions | Scheduled-bell, SSR recorder, 9 Digit User ID, T9 Input, Record Checking, Multiple Languages |
| Product Dimensions (LxWxH) | 18.5 x 14 x 3 cm |
| Item Weight | 790 g |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Operating Humidity | 20% to 80% |
7. Software Information
The ZKTeco LX15 comes with complimentary desktop-based software, ZKTime.Net 3.0, to enhance data management and reporting capabilities. This software allows for more advanced analysis of attendance data.
Image: The LX15 device demonstrating connectivity with complimentary desktop software.
Image: Overview of the ZKTime.Net 3.0 desktop software interface for time attendance management.
8. Warranty and Support
ZKTeco provides a one-year manufacturer's limited warranty and free lifetime technical support for the LX15 device.
Customer Support:
For any queries or assistance, please contact our customer care team during the specified hours.
Image: ZKTeco India customer support details and operating hours.
- Phone: 080 6828 1333 / +91-8097538492
- Email: ecommerceindia@zkteco.in
- Operating Hours: Monday - Saturday, 9:30 AM - 6:30 PM
Image: Description of ZKTeco's expert customer care services.
9. Product Video Overview
Video: An official overview of the ZKTeco LX15 Fingerprint Time Attendance Terminal, showcasing its design and core functionalities.