Hormann Homematic IP Gateway 4511629 Instruction Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your Hormann Homematic IP Gateway, model 4511629. This device enables smart control of compatible Hormann garage door motors via the Homematic IP smart home system, offering convenience and enhanced functionality.

Image 1.1: The Hormann Homematic IP Gateway. This image shows the compact, white plastic casing of the gateway, designed for integration into your smart home system.

2. Safety Information

Please read and understand all safety instructions before installing or operating the device. Failure to follow these instructions may result in damage to the product, property, or personal injury.

Intended Use: The Hormann Homematic IP Gateway is designed exclusively for controlling compatible Hormann garage door motors within a Homematic IP smart home system.
Environmental Conditions: This device has a protection class suitable only for dry indoor rooms. Do not expose it to moisture, extreme temperatures, or direct sunlight. The recommended operating temperature range is -20°C to +60°C.
Power Supply: Ensure the operating voltage is 24 V DC as specified. Use only approved power sources.
Interference: Wireless transmission operates on a non-exclusive path, meaning interference from other devices cannot be entirely ruled out. Other disturbances may occur.
Installation: Installation should be performed by a qualified professional or a person with sufficient technical knowledge to ensure correct and safe setup.

3. Package Contents

Verify that all components are present in the box before proceeding with installation:

1 x Hormann Homematic IP Gateway
1 x Connection Cable (10 cm) with System Plug

4. Setup

Follow these steps to set up your Hormann Homematic IP Gateway:

Preparation: Ensure you have a compatible Hormann garage door motor and a Homematic IP Access Point or Homematic Central CCU2/CCU3 already installed and configured.
Connection: Connect the provided 10 cm connection cable from the gateway to the designated port on your Hormann garage door motor. The system plug ensures a secure connection.
Power On: Once connected, ensure the gateway receives power. The device operates at 24 V DC.
Integration with Homematic IP System: Refer to your Homematic IP Access Point or Central CCU2/CCU3 manual for instructions on adding new devices to your smart home system. The gateway should be discoverable for pairing.
App Download: Download the free Homematic IP app from the App Store (for iOS devices) or Google Play (for Android devices).

The gateway is designed for easy assembly and integration into your existing smart home environment.

5. Operating the Gateway

The Hormann Homematic IP Gateway allows you to control your garage door motor remotely through the Homematic IP smart home system.

5.1. Via Homematic IP App (Smartphone/Tablet)

Control your garage door motor using the Homematic IP app on your smartphone or tablet. The app provides an intuitive interface for opening, closing, and monitoring your garage door.

System Requirements:
- Android devices: Version 5.0 or higher
- iOS devices: Version 9.3 or higher
Functionality: The app allows for individual or automated control of your garage door drive, enabling you to integrate it into smart home routines and scenarios.

5.2. Via Homematic WebUI (Web Interface)

For advanced configuration and control, you can use the Homematic WebUI via a web browser. This requires a Homematic Central CCU2/CCU3.

System Requirements: Latest version of the web interface. Compatible browsers include Internet Explorer, Safari, Google Chrome, or Mozilla Firefox.
Functionality: The WebUI offers comprehensive control and customization options for your smart home devices, including the Hormann Homematic IP Gateway.

6. Compatibility

The Hormann Homematic IP Gateway is compatible with various Hormann garage door motor series. Please verify your motor's compatibility before purchase and installation.

Compatible Hormann garage door motors include:

Supramatic I / P 3 (from CE index)
Supramatic H T
Supramatic / Promatic / Series 4 (requires HCP adapter)
Rotamatic / P L (from 09/2010)
Versamatic / P
Lineamatic / H / P (from 10/2010)

Important: Always check the specific model and series of your garage door motor to ensure full compatibility. An HCP adapter may be required for certain Series 4 motors.

7. Specifications

Feature	Detail
Model Number	4511629
Dimensions (W x H x D)	51 x 47.5 x 16 mm (Product description) 12.5 x 11.5 x 5 cm (General specifications)
Weight	120 g
Material	Plastic
Color	White (Light Grey RAL 7035)
Protection Class	Only for dry rooms
Temperature Range	-20°C to +60°C
Operating Voltage	24 V DC
Included Components	1 x Hormann Homematic IP Gateway
Batteries Required	No
Assembly Required	Yes (for integration with motor)

8. Maintenance

The Hormann Homematic IP Gateway requires minimal maintenance to ensure optimal performance and longevity.

Cleaning: Gently wipe the device with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
Environment: Ensure the device remains in a dry environment, away from direct moisture and extreme temperature fluctuations.
Firmware Updates: Regularly check for and install any available firmware updates through the Homematic IP app or WebUI to ensure the device operates with the latest features and security enhancements.

9. Troubleshooting

If you encounter issues with your Hormann Homematic IP Gateway, consider the following troubleshooting steps:

No Connection:
- Verify that the connection cable is securely attached to both the gateway and the garage door motor.
- Ensure the gateway is receiving power (24 V DC).
- Check the status of your Homematic IP Access Point or Central CCU2/CCU3.
App Control Issues:
- Confirm your smartphone or tablet meets the minimum operating system requirements (Android 5.0+, iOS 9.3+).
- Ensure your Homematic IP app is updated to the latest version.
- Check your internet connection and the connection between your Homematic IP Access Point and the internet.
Interference: As wireless transmission occurs on a non-exclusive path, other wireless devices might cause interference. Try relocating the gateway or other wireless devices if persistent issues occur.
Compatibility: Double-check that your specific Hormann garage door motor model is listed as compatible. An incompatible motor will not function with the gateway.
Reset: If problems persist, consult the Homematic IP system documentation for instructions on how to reset the gateway and re-pair it with your smart home system.

10. Warranty and Support

For warranty claims, technical assistance, or further inquiries regarding your Hormann Homematic IP Gateway, please contact Hormann customer support. Keep your proof of purchase handy when contacting support.

You can typically find contact information on the official Hormann website or within the Homematic IP app's support section.

	HÖRMANN HEI 3 BiSecur Funkempfänger: Montage- und Betriebsanleitung Detaillierte Anleitung zur Montage, Installation und Bedienung des HÖRMANN HEI 3 BiSecur Funkempfängers. Enthält Sicherheitshinweise, technische Daten und Konformitätserklärungen.
	Hormann Rollmatic T: Overview of Preset End-of-Travel Positions for Tubular Drives Detailed overview of Hormann Rollmatic T tubular drive preset end-of-travel positions, including features, benefits, and notes on mechanical adjustment. Information from Garage Doors Online UK.
	HORMANN Track Application L: Low Headroom Guide and Specifications Technical specifications and installation guidelines for HORMANN sectional garage doors with the L-track application, detailing dimensions, operator compatibility, and clearance requirements for ProMatic and SupraMatic systems.
	Manual for Series 40 Sectional Garage Doors: Fitting, Operation, Maintenance, and Dismantling Comprehensive guide for the Series 40 sectional garage doors, covering installation, operation, maintenance, troubleshooting, and dismantling. Includes safety instructions and technical specifications.
	HORMANN Collective Garage Doors: Technical Manual for ET 450, ET 500, ST 500, SP 500 Comprehensive technical manual from HORMANN detailing collective garage doors, including non-protruding up-and-over models (ET 450, ET 500), sliding doors (ST 500), and sports hall doors (SP 500). Covers fitting types, dimensions, and installation specifications.
	Hörmann SupraMatic A Garage Door Operator Owner's Manual Comprehensive owner's manual for the Hörmann SupraMatic A garage door operator, detailing installation, operation, safety guidelines, and maintenance for residential use. Features include quiet toothed belt drive and DC motor.

Hormann 4511629