Introduction
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your ICO Bath W3105 Tuzio Avento Programmable Electric Hardwired Steel Towel Warmer. Please read this manual thoroughly before installation and use, and retain it for future reference.
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Ensure the towel warmer is installed by a qualified electrician in accordance with all local electrical codes.
- This appliance is designed for warming towels only. Do not use it for drying clothes or other items.
- Do not immerse the towel warmer in water or other liquids.
- Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Keep children away from the appliance.
- Disconnect power before performing any maintenance or cleaning.
Product Overview
The ICO Bath W3105 Tuzio Avento Towel Warmer is a hardwired electric unit designed to provide warm, dry towels. It features a sleek design with concealed screws and multiple bars for ample hanging space.
Figure 1: ICO Bath W3105 Tuzio Avento Towel Warmer. This image displays the black, rectangular towel warmer with twelve horizontal bars, designed for wall mounting. The hardwired connection is visible at the bottom right.
Key Features:
- Material: Constructed from durable steel.
- Design: Concealed screws for a clean aesthetic.
- Capacity: Twelve (12) bars for warming and drying towels.
- Power Source: Hardwired for permanent installation.
- Control: Includes a programmable timer.
Setup and Installation
Installation of the ICO Bath W3105 Towel Warmer requires electrical wiring and should only be performed by a licensed electrician. Ensure power is disconnected at the circuit breaker before beginning installation.
Pre-Installation Checklist:
- Verify all components are present and undamaged.
- Confirm the installation location is suitable for a hardwired appliance and can support the unit's weight.
- Ensure compliance with local electrical codes and regulations.
Installation Steps (Summary for Professional):
- Turn off power at the main circuit breaker.
- Mount the towel warmer securely to the wall using appropriate fasteners.
- Connect the hardwired electrical supply to the unit's wiring, ensuring proper grounding.
- Install the programmable timer according to its specific instructions.
- Restore power and test the unit.
Note: Detailed installation diagrams and specific wiring instructions are provided in the separate installation guide included with your product. This section provides a general overview.
Operating Instructions
The ICO Bath W3105 Towel Warmer is operated via its integrated programmable timer. Refer to the timer's specific manual for detailed programming instructions.
Basic Operation:
- Power On/Off: The unit will turn on and off according to the schedule set on the programmable timer.
- Manual Override: Most programmable timers offer a manual override function to turn the unit on or off outside of the programmed schedule. Consult your timer's manual for this feature.
- Towel Placement: For optimal warming, drape towels evenly over the bars, ensuring good air circulation. Avoid overcrowding the bars.
The towel warmer will heat up to its operating temperature and maintain it during the programmed ON cycles. The heating element provides consistent warmth for your towels.
Care and Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your towel warmer.
- Cleaning: Disconnect power before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically inspect the unit for any signs of damage or wear, especially the electrical connections.
- Storage: If the unit is not in use for an extended period, ensure it is clean and dry.
Troubleshooting
If you encounter issues with your ICO Bath W3105 Towel Warmer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Towel warmer does not heat. | No power supply; Timer not programmed correctly; Faulty heating element. | Check circuit breaker; Verify timer settings; Contact a qualified electrician for inspection. |
| Unit is warm but towels are not drying effectively. | Overcrowding of towels; Insufficient operating time. | Ensure towels are draped loosely; Increase programmed ON time. |
| Unusual noises or odors. | Internal component issue. | Immediately disconnect power and contact customer support. Do not attempt to repair. |
For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact ICO Bath customer support.
Product Specifications
The following are the technical specifications for the ICO Bath W3105 Tuzio Avento Towel Warmer:
| Specification | Value |
|---|---|
| Model | W3105 (Tuzio Avento) |
| Width | 19 1/2" (49.5 cm) |
| Height | 31" (78.7 cm) |
| Depth | 3" (7.6 cm) |
| Material | Steel |
| Power Source | Hardwired |
| Voltage | 120V |
| Wattage | 150W - 450W |
| Amperage | 1.4A - 4.1A |
| Number of Bars | 12 |
Warranty Information
ICO Bath provides the following warranty for the W3105 Tuzio Avento Towel Warmer:
- Limited Lifetime Warranty: Applies to the towel warmer unit, excluding the heating element and timer.
- Two-Year Warranty: Covers the heating element and digital timer.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation provided with your product or visit the ICO Bath official website.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact ICO Bath customer support.
Please refer to the product packaging or the official ICO Bath website for current contact information.
