FiTORCH P25 LED Flashlight User Manual

Introduction

Thank you for choosing the FiTORCH P25 LED Flashlight. This compact and powerful flashlight, also known as "Little Fatty," is designed for various lighting needs, offering high brightness and a robust build. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your P25 flashlight. Please read it thoroughly before use.

Image: The FiTORCH P25 flashlight comfortably held in a hand, illustrating its compact size.

Product Overview and Features

The FiTORCH P25 is a high-performance LED flashlight featuring a compact design and powerful illumination capabilities. It is equipped with four CREE XP-G3 LEDs, delivering a maximum output of 3000 lumens.

• Palm-sized Floodlight: Compact form factor for easy portability and handling.
• High Lumen Output: Reaches up to a maximum of 3000 lumens for bright illumination.
• Extended Beam Distance: Capable of throwing a beam over 750 feet (225 meters).
• Optical Lens: Features a 10-degree optical lens for efficient light distribution.
• Durable Finish: Constructed with HA-III military-grade hard-anodized finish for enhanced durability.
• Rechargeable Battery: Utilizes a 26350 Li-ion rechargeable battery with a USB charging port.

Image: Front view of the FiTORCH P25 flashlight, showcasing its four LED emitters and side switch.

Image: A close-up view of the four CREE XP-G3 LED emitters within the flashlight head.

Image: Side profile of the FiTORCH P25 flashlight, displaying the model number "P25" and compliance markings.

Package Contents

Upon opening your FiTORCH P25 package, please verify that all the following items are included:

• FiTORCH P25 LED Flashlight
• 26350 Li-ion Battery (included)
• Holster
• Lanyard
• Spare O-ring(s)
• USB Cable

Image: All components included with the FiTORCH P25 flashlight: the flashlight itself, a 26350 battery, holster, lanyard, spare O-rings, and a USB charging cable.

Setup

1. Battery Installation

1. Unscrew the tail cap of the flashlight by turning it counter-clockwise.
2. Insert the included 26350 Li-ion battery with the positive (+) terminal facing towards the head of the flashlight.
3. Screw the tail cap back on clockwise until it is securely tightened. Ensure the O-ring is properly seated to maintain water resistance.

2. Initial Charging

It is recommended to fully charge the battery before first use.

1. Locate the USB charging port on the flashlight body (typically under a rubber cover).
2. Connect the provided USB cable to the flashlight's charging port and the other end to a USB power source (e.g., computer, wall adapter).
3. The indicator light on the flashlight will show charging status (e.g., red for charging, green for fully charged).
4. Once fully charged, disconnect the USB cable and ensure the rubber cover is securely closed to protect the port from dust and water.

Operating Instructions

The FiTORCH P25 features a single side switch for all operations.

Power On/Off

• To Turn On: Press the side switch once. The flashlight will turn on in the last used general mode (Low, Medium, High, Turbo).
• To Turn Off: Press and hold the side switch for approximately 0.5 seconds.

Mode Selection (General Modes)

• When the flashlight is on, single-click the side switch to cycle through modes: Low → Medium → High → Turbo.
• The flashlight has mode memory and will turn on in the last used general mode.

Special Modes (Strobe/SOS)

• Strobe: From any state (on or off), double-click the side switch to activate Strobe mode.
• SOS: From Strobe mode, double-click the side switch again to activate SOS mode.
• Exit Special Modes: Single-click the side switch to return to the last used general mode.

Lockout Function

The P25 features a mechanical lockout function to prevent accidental activation.

• To Lock: Slightly loosen the tail cap by turning it counter-clockwise. The flashlight will not turn on.
• To Unlock: Tighten the tail cap clockwise until it is secure.

Image: The tail cap of the FiTORCH P25 flashlight, showing the "LOCK OUT" markings and directional arrows for engaging and disengaging the mechanical lockout.

Charging

The FiTORCH P25 is equipped with a built-in USB charging port for convenient recharging of the 26350 Li-ion battery.

1. Open the rubber cover protecting the USB charging port on the flashlight body.
2. Connect the provided USB cable to the flashlight's port.
3. Connect the other end of the USB cable to a standard USB power source (e.g., 5V/1A USB adapter, computer USB port).
4. The indicator light on the side switch will illuminate red during charging.
5. Once the battery is fully charged, the indicator light will turn green.
6. After charging, disconnect the USB cable and firmly close the rubber cover to ensure water and dust resistance.

Note: The flashlight may not operate at full brightness or may not turn on while charging.

Maintenance

• Cleaning: Clean the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Threads and O-rings: Periodically lubricate the threads and O-rings with silicone grease to maintain water resistance and smooth operation. Replace worn O-rings with the provided spares.
• Battery Care: If the flashlight will not be used for an extended period, remove the battery to prevent potential leakage. Store the battery in a cool, dry place.
• Contact Points: Keep the battery contact points clean. If they become dirty, clean them with a cotton swab dipped in rubbing alcohol.

Troubleshooting

Specifications

Performance Data (from packaging image):

Safety Information

• Do not shine the flashlight directly into eyes. The intense light can cause temporary vision impairment or permanent eye damage.
• Keep out of reach of children.
• Do not disassemble the sealed head of the flashlight, as this may damage the LEDs and void the warranty.
• Use only the recommended 26350 Li-ion battery. Using other battery types may cause damage or pose a safety risk.
• Avoid exposing the flashlight to extreme temperatures or direct sunlight for prolonged periods.
• Ensure the tail cap is fully tightened to maintain water resistance.

Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official FiTORCH website. Keep your purchase receipt as proof of purchase.

For technical assistance or inquiries, please contact FiTORCH customer service.