Scheppach SBP250 Submersible Pump User Manual

Introduction

Thank you for choosing the Scheppach SBP250 Submersible Pump. This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your pump. Designed for clean water transfer from rain barrels or cisterns, it features a powerful 250W motor, a capacity of 6500 liters per hour, and an automatic float switch for convenient use. Please read these instructions carefully before operating the device and keep them for future reference.

Safety Instructions

Always observe the following safety precautions to prevent injury or damage:

• Ensure the power supply matches the specifications on the pump's rating plate.
• Never operate the pump with a damaged power cord or plug.
• Do not lift or carry the pump by its power cord.
• Keep children and unauthorized persons away from the operating area.
• Always disconnect the pump from the power supply before performing any maintenance or cleaning.
• The pump is designed for clean water only. Do not use it for flammable, corrosive, or explosive liquids.
• Ensure the pump is fully submerged during operation to prevent overheating.
• Avoid running the pump dry.

Product Overview

The Scheppach SBP250 submersible pump is designed for efficient water transfer. Familiarize yourself with its main components:

• Pump Body: Durable plastic housing protecting the motor and internal components.
• Motor: Powerful 250W motor for efficient water pumping.
• Float Switch: Automatically turns the pump on and off based on water level.
• Discharge Connection: Standard 1¼" connection for hoses.
• Power Cable: 10-meter cable for extended reach, designed to be plugged outside the wet area.
• Handle: Integrated handle for easy transport and lowering/raising the pump.

Setup

Follow these steps to set up your submersible pump:

1. Unpacking: Carefully remove the pump from its packaging. Check for any signs of damage.
2. Hose Connection: Attach a suitable discharge hose (not included) to the 1¼" discharge connection. Ensure a tight and secure fit to prevent leaks.
3. Positioning the Pump:

   

   Place the pump on a stable, level surface in the water source (e.g., rain barrel, cistern). Ensure the pump is fully submerged and not resting on mud or debris that could block the intake. The float switch must be able to move freely to ensure automatic operation.
4. Power Connection: Ensure your hands are dry. Plug the 10-meter power cable into a grounded electrical outlet. The outlet should be located outside the wet area.

Operating

The SBP250 pump operates automatically via its float switch:

1. Automatic Operation: Once plugged in and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will stop when the water level drops and the float switch lowers.
2. Manual Override (if applicable): Some models allow the float switch to be fixed in an 'up' position for continuous operation. Refer to the specific instructions for your model if this feature is desired. For the SBP250, ensure the float switch can move freely for standard automatic operation.
3. Monitoring: Periodically check the pump's operation and the water level. Ensure the discharge hose is clear and directing water as intended.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your pump:

• Cleaning: After each use, especially if pumping slightly dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake screen.
• Inspection: Regularly inspect the power cable and plug for any damage. Check the discharge connection for wear or leaks.
• Winter Storage: If storing the pump in freezing temperatures, ensure all water is drained from the pump and hose to prevent damage from ice expansion. Store in a dry, frost-free location.
• No User-Serviceable Parts: The motor and internal components are not user-serviceable. Do not attempt to open the pump housing.

Troubleshooting

Here are some common issues and their solutions:

Specifications

Warranty and Support

Scheppach products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Scheppach website. Please have your model number (SBP250) and purchase details ready when contacting support.

For further assistance, you may contact Scheppach customer service directly. Contact details can typically be found on the manufacturer's website or in the product packaging.