Introduction
This manual provides essential instructions for the safe and efficient use of your Sealy Tritech 18" Queen Inflatable Air Mattress. Designed for both indoor and outdoor use, this mattress features a built-in pump for quick inflation and deflation, Tritech internal beams for enhanced support, and an Ultra-Fresh treated sleeping surface for hygiene. Please read all instructions carefully before setup and operation.
Image: The Sealy Tritech 18" Queen Inflatable Air Mattress, showing its dimensions of 80 inches long, 60 inches wide, and 18 inches high.
Setup and Inflation
Your Sealy Tritech air mattress comes equipped with a convenient built-in electric pump for easy inflation.
- Unfold the Mattress: Lay the deflated air mattress flat on a clean, level surface, ensuring there are no sharp objects underneath.
- Locate the Built-in Pump: The pump is integrated into the side of the mattress. Open the cover to access the power cord and control dial.
- Plug In: Connect the 110-120V AC power cord to a standard electrical outlet.
- Inflate: Turn the control dial to the 'Inflate' position. The mattress will begin to inflate automatically. Inflation typically takes approximately 4 minutes to reach full firmness. Monitor the inflation process to achieve your desired firmness level.
- Seal the Valve: Once inflated, turn the dial to the 'Off' position and close the pump cover securely.
Image: A hand turning the dial of the built-in pump to inflate the mattress.
Video: Inflation Process
Video: This video demonstrates the quick inflation process of the Sealy Tritech air mattress using its built-in pump.
Operation and Usage
The Sealy Tritech air mattress is designed for comfort and stability, accommodating up to 661 pounds.
- Comfort Features: The mattress features a velvet-like sleeping surface and a Wave Beam design with Tritech internal beams, providing optimal comfort and support.
- Weight Capacity: Do not exceed the maximum weight capacity of 661 pounds to ensure product longevity and user safety.
- Placement: For best results, place the mattress on a smooth, clean surface free from debris. Avoid placing it near heat sources or sharp objects.
Image: A couple comfortably seated on the fully inflated Sealy Tritech air mattress, highlighting its spacious design.
Maintenance and Storage
Proper care and storage will extend the life of your air mattress.
- Cleaning: The product care instructions specify "Hand Wash Only." Use a damp cloth with mild soap to clean the surface. Do not use harsh chemicals or abrasive cleaners. Ensure the mattress is completely dry before storage.
- Deflation: To deflate, open the pump cover and turn the control dial to the 'Deflate' position. The pump will actively remove air from the mattress.
- Folding and Storage: Once fully deflated, carefully fold the mattress. The included storage bag is designed for easy transportation and compact storage. Ensure the mattress is clean and dry before placing it in the bag to prevent mold or mildew.
- Repair Patch: A repair patch is included for minor punctures. Follow the instructions provided with the patch for effective repair.
Image: A hand opening the compartment of the built-in pump, revealing the power cord and control dial.
Video: Deflation and Storage
Video: This video illustrates the deflation process and how to neatly pack the air mattress into its storage bag.
Troubleshooting
If you encounter issues with your air mattress, consider the following:
- Slow Deflation: If the mattress seems to lose air over time, first ensure the pump dial is securely in the 'Off' position and the cover is closed. Small temperature changes can cause slight pressure drops. If significant deflation occurs, inspect the mattress for punctures.
- Punctures: Use the included repair patch to fix small holes. Clean the area around the puncture, apply the patch firmly, and allow sufficient time for it to bond before re-inflating.
- Pump Not Working: Ensure the power cord is fully plugged into both the pump and the electrical outlet. Check if the outlet is functional.
Specifications
| Size | Queen |
| Product Dimensions | 79.9"L x 59.8"W x 18.1"Th |
| Material | Polyester |
| Weight Capacity | 661 Pounds |
| Special Features | Inflatable, Built-in Pump, Ultra-Fresh Treatment, Water Repellent |
| Included Components | Carry Bag, Built-in Pump, Repair Patch |
| Construction Type | Inflatable with Tritech internal beams and polyester mesh |
| Inflation Time | Approx. 4 minutes |
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please refer to the documentation included with your product or visit the official Sealy website. Keep your proof of purchase for any warranty claims.
