MohMus Premium Microfibre Vacuum Cleaner Bags and Filter Instruction Manual

Introduction

Thank you for choosing MohMus Premium Microfibre Vacuum Cleaner Bags and the included universal filter. This product is designed to provide optimal filtration and maintain strong suction power for your compatible Bosch or Siemens vacuum cleaner. This manual provides essential instructions for proper installation, usage, and maintenance to ensure the best performance and longevity of your vacuum cleaner bags and filter.

Package Contents

• 10 x MohMus Premium Microfibre Vacuum Cleaner Bags
• 1 x Universal Filter (cut-to-size)

Compatibility

These vacuum cleaner bags and filter are compatible with various Bosch and Siemens vacuum cleaner models, including but not limited to:

• Bosch Series: BGB2, BGB7, BGB8, BGL2, BGL3, BGL4, BGL7, BGL8, BGLS4, BGN2, BSA2, BSG6, BSGL2
• Bosch/Siemens Type: D, E, F, G, H, BBZ41FGALL, BBZ41FG, 468383, 577549, 17000940, VZ41FGALL, VZ51GALL, G ALL
• Melitta Swirl Handy-Bag: S62, S67, S68, S73, Y94

Note: Not suitable for Bosch BSG8 series or BSN series.

Setup and Installation

1. Installing the Vacuum Cleaner Bag

1. Open the dust compartment of your vacuum cleaner according to your appliance's instruction manual.
2. Carefully remove the old vacuum cleaner bag. Ensure the dust closure flap is activated to prevent dust spills.
3. Unfold a new MohMus microfibre vacuum cleaner bag.
4. Insert the new bag into the bag holder, ensuring it is securely seated and the opening aligns correctly with the vacuum cleaner's inlet.
5. Close the dust compartment lid until it clicks into place.

Image: This image illustrates the three steps for using the dust closure flap on the vacuum cleaner bag. Step 1 shows the bag opening, Step 2 shows the flap being closed, and Step 3 shows the flap securely sealed to prevent dust from escaping during bag removal and disposal.

2. Installing the Universal Filter

The included universal filter can be cut to size to fit your vacuum cleaner's filter compartment. This filter provides additional air filtration.

1. Locate the motor protection filter or exhaust filter compartment in your vacuum cleaner. Refer to your vacuum cleaner's manual for its exact location.
2. Remove the old filter, if present.
3. Place the new universal filter over the old filter or the filter compartment to measure the required size.
4. Using scissors, carefully cut the universal filter to match the dimensions of your vacuum cleaner's filter compartment.
5. Insert the newly cut filter into the designated compartment, ensuring it lies flat and covers the entire area.
6. Close the filter compartment cover.

Image: This image displays the universal filter sheet, highlighting its feature of being cut to size. An icon with scissors and a dashed line indicates the filter's adaptability to various vacuum cleaner models.

Operating Instructions

Once the vacuum cleaner bag and filter are correctly installed, your vacuum cleaner is ready for use. The multi-layer microfibre material ensures high filtration efficiency and helps maintain optimal suction power throughout the bag's lifespan.

Image: This infographic highlights key features of the MohMus vacuum cleaner bags. It shows optimal filtration for long-lasting suction power, high-quality multi-layer microfiber material, strong and tear-resistant construction, and the inclusion of a universal air filter that can be cut to size.

Maintenance

Replacing the Vacuum Cleaner Bag

Replace the vacuum cleaner bag when the suction power noticeably decreases, or when the bag full indicator (if present on your vacuum cleaner) signals it's full. Regular replacement ensures efficient cleaning and prolongs the life of your vacuum cleaner.

1. Turn off and unplug your vacuum cleaner from the power outlet.
2. Open the dust compartment.
3. Carefully remove the full bag, ensuring to activate the dust closure flap to seal the opening and prevent dust from escaping.
4. Dispose of the full bag responsibly according to local waste disposal regulations.
5. Install a new MohMus vacuum cleaner bag as described in the "Setup and Installation" section.

Replacing the Universal Filter

The universal filter should be checked periodically and replaced every 3-6 months, or more frequently if you notice a decrease in air quality or suction power. A clogged filter can reduce performance and put strain on the motor.

1. Turn off and unplug your vacuum cleaner.
2. Locate and open the filter compartment.
3. Remove the old, soiled filter.
4. Cut and install a new universal filter as described in the "Setup and Installation" section.

Troubleshooting

• Reduced Suction Power:
  • Check if the vacuum cleaner bag is full and needs replacement.
  • Inspect the universal filter; it might be clogged and require cleaning or replacement.
  • Ensure the vacuum cleaner bag is correctly installed and sealed within the compartment.
  • Verify that there are no blockages in the vacuum cleaner hose or attachments.
• Dust Escaping:
  • Ensure the vacuum cleaner bag is properly seated and the dust closure flap is activated when removing a full bag.
  • Check if the dust compartment lid is securely closed.
  • Inspect the universal filter for proper installation and condition.

Specifications

Support

For further assistance or inquiries regarding MohMus products, please refer to the retailer where you purchased this item or visit the official MohMus website for contact information. Please have your product details ready when contacting support.