BoxWave ClearTouch Anti-Glare Screen Protector User Manual

1. Introduction

This manual provides instructions for the installation, use, and maintenance of your BoxWave ClearTouch Anti-Glare Screen Protector for the Samsung SHP-DR708. This screen protector is designed to reduce glare, resist fingerprints, and protect your device's screen from scratches and smudges, while maintaining touch sensitivity and clarity.

2. Package Contents

Please verify that all items listed below are included in your package:

• Two (2) BoxWave ClearTouch Anti-Glare Screen Protectors
• One (1) Applicator Card
• One (1) Microfiber Cleaning Cloth
• One (1) Dust Removing Sticker

Image: Contents of the BoxWave ClearTouch Anti-Glare Screen Protector package, showing two screen protectors, an applicator card, a microfiber cloth, and a dust removal sticker.

Image: A close-up view of the included accessories: an applicator card, a microfiber cleaning cloth, and a dust removing sticker.

3. Installation Instructions (Setup)

Follow these steps carefully for optimal application:

1. Clean Your Device Screen: Use the provided microfiber cleaning cloth to thoroughly clean the screen of your Samsung SHP-DR708. Ensure there are no dust particles, smudges, or fingerprints. For stubborn marks, a screen cleaner (not included) can be used, followed by drying with the microfiber cloth.
2. Remove Dust: Use the dust removing sticker to lift any remaining dust particles from the screen. Lightly dab the sticker across the entire screen surface.
3. Peel Back Layer 1: Carefully peel back a small portion of the protective film labeled 'Layer 1' from one end of the screen protector. Avoid touching the adhesive side.
4. Align the Protector: Align the exposed adhesive edge of the screen protector with the corresponding edge of your device's screen. Ensure precise alignment with all cutouts (if any) and edges.
5. Apply and Smooth: Slowly and steadily lower the screen protector onto the device screen, gradually peeling off more of 'Layer 1' as you go. Use the applicator card to gently push out any air bubbles towards the edges as you apply. Work from one end to the other.
6. Remove Remaining Bubbles: If any small bubbles remain, use the applicator card to push them towards the nearest edge. Minor bubbles may dissipate naturally within 24-48 hours.
7. Remove Layer 2: Once the screen protector is fully applied and smoothed, carefully peel off the top protective film labeled 'Layer 2'.
8. Final Wipe: Use the microfiber cloth to gently wipe the newly installed screen protector.

4. Product Features and Usage (Operating)

The BoxWave ClearTouch Anti-Glare Screen Protector enhances your device experience with several key features:

• Anti-Glare: Reduces reflections and glare from bright light sources, improving screen visibility in various environments.
• Anti-Fingerprint (Matte Finish): The matte surface repels smudges and fingerprints, keeping your screen cleaner and clearer.
• Scratch Protection: Provides a durable layer of protection against scratches and minor abrasions.
• Smooth Touch: Maintains the original touch sensitivity of your device's screen.
• Paper-like Feel: Offers a unique tactile experience, making writing and drawing on your screen feel more natural.

Image: A tablet screen with the ClearTouch Anti-Glare protector, demonstrating a stylus being used for writing, illustrating the paper-like feel.

Image: A visual comparison showing a screen protected by BoxWave ClearTouch on one side, free of fingerprints, and an unprotected screen on the other side covered in fingerprints, highlighting the anti-smudge feature.

Image: A side-by-side comparison of a device screen with distracting glare versus a screen protected by ClearTouch Anti-Glare, showing significantly reduced reflections.

5. Maintenance

To maintain the clarity and effectiveness of your screen protector:

• Regularly wipe the screen protector with the provided microfiber cleaning cloth to remove dust and light smudges.
• For more persistent marks, lightly dampen the microfiber cloth with water or a mild, screen-safe cleaning solution (avoid harsh chemicals or abrasive materials).
• Do not use paper towels or rough fabrics, as these can scratch the protector or leave lint.

6. Troubleshooting

Common Issues and Solutions:

• Bubbles After Installation:
  • Cause: Air trapped during application.
  • Solution: Use the applicator card to gently push bubbles towards the nearest edge. Small bubbles may dissipate naturally within 24-48 hours. If large bubbles persist, it may indicate dust underneath, requiring re-application.
• Dust Under the Protector:
  • Cause: Incomplete screen cleaning before application.
  • Solution: Carefully lift the nearest corner of the screen protector. Use a dust removing sticker or a piece of tape to gently lift the dust particle from the adhesive side of the protector or the device screen. Re-apply the protector slowly.
• Misalignment:
  • Cause: Incorrect positioning during initial application.
  • Solution: If noticed immediately after application, gently lift the protector from a corner and re-align. If the adhesive has fully set, it may be difficult to re-position without damaging the protector or introducing dust. Use the second protector if necessary.
• Reduced Touch Sensitivity:
  • Cause: Improper installation or a faulty protector.
  • Solution: Ensure the protector is fully adhered without air gaps. If the issue persists, contact customer support.

7. Specifications

8. Warranty and Support

BoxWave products are designed for quality and performance. For any questions, concerns, or support regarding your ClearTouch Anti-Glare Screen Protector, please contact BoxWave customer service. Refer to the product packaging or the official BoxWave website for the most current contact information and warranty details.