Bell Airblaster 350 FramePump Instruction Manual

1. Introduction

The Bell Airblaster 350 FramePump is designed to provide a convenient and efficient solution for inflating bicycle tires on the go. Its compact size and lightweight construction make it suitable for mounting directly to your bike frame or carrying in a backpack. This manual provides instructions for the proper setup, operation, and maintenance of your Airblaster 350 FramePump.

2. Product Features

The Bell Airblaster 350 FramePump includes the following key features:

• Smart Valve: Automatically adjusts to both Schrader and Presta valves without the need for manual adaptation.
• Fold Out Handle: Provides a secure and comfortable grip during inflation.
• High Pressure Capability: Inflates tires up to 120 PSI (Pounds per Square Inch).
• Frame Mountable: Includes a bracket for convenient attachment to your bicycle frame.
• Compact Design: Small and lightweight for easy portability.

Figure 2.1: The Bell Airblaster 350 FramePump highlighting the 'Smart Valve' feature, which eliminates the need for valve adapters.

Figure 2.2: Visual representation of the pump's compatibility with both Schrader and Presta valves, and the fold-out handle design for improved ergonomics.

3. Setup and Installation

To install the Airblaster 350 FramePump onto your bicycle frame:

1. Identify a suitable location on your bike frame, typically near the water bottle cage mounts or along the seat tube.
2. Position the included mounting bracket on the frame.
3. Secure the bracket using the provided zip ties or screws (if your frame has appropriate mounts). Ensure the bracket is firmly attached and does not interfere with pedaling or other bike components.
4. Slide the Airblaster 350 FramePump into the mounting bracket. The pump should snap securely into place.
5. Verify that the pump is securely held by the bracket and does not rattle or move excessively during riding.

Figure 3.1: The mounting bracket and securing zip ties for attaching the pump to a bicycle frame.

Figure 3.2: The Bell Airblaster 350 FramePump shown mounted on a bicycle frame, illustrating its compact fit.

4. Operating Instructions

Follow these steps to inflate your bicycle tire:

1. Prepare the Pump:
   • Locate the fold-out handle on the pump.
   • Pull the handle out to its "DOWN" position, extending it for a better grip.
2. Attach to Valve:
   • Ensure the pump head lever is in the "DOWN" (unlocked) position.
   • Press the pump head firmly onto the tire valve (either Schrader or Presta). The Smart Valve will automatically adapt.
   • Push the lever "UP" to lock the pump head onto the valve, creating a secure seal.
3. Inflate Tire:
   • Begin pumping by moving the handle up and down in a steady motion.
   • Continue pumping until the desired tire pressure is reached, up to a maximum of 120 PSI. Refer to your tire's sidewall for recommended pressure.
4. Remove Pump:
   • Once inflation is complete, push the lever "DOWN" to release the pump head from the valve.
   • Carefully remove the pump head from the tire valve.
   • Fold the handle back into its stored position.

Figure 4.1: Visual guide on how to operate the pump, including extending the handle and locking the valve head.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Airblaster 350 FramePump:

• Cleaning: Wipe down the pump exterior with a damp cloth to remove dirt and grime. Avoid using harsh chemicals.
• Storage: Store the pump in a dry environment when not in use. If mounted on the bike, ensure it is protected from excessive exposure to elements.
• Check for Damage: Periodically inspect the pump for any signs of wear, cracks, or damage to the barrel, handle, or valve head.
• Valve Head Inspection: Ensure the rubber seal inside the valve head is clean and free of debris to maintain a tight seal during inflation.

6. Troubleshooting

If you encounter issues with your Airblaster 350 FramePump, consider the following:

• Pump not building pressure:
  • Ensure the pump head is securely locked onto the tire valve. The lever must be in the "UP" position.
  • Check the rubber seal inside the pump head for debris or damage that might prevent a proper seal.
  • Verify that the tire valve itself is not faulty or stuck.
• Difficulty attaching to Presta valve:
  • For Presta valves, ensure the valve stem nut is unscrewed before attaching the pump head.
  • Press the pump head firmly and squarely onto the valve before locking the lever.
• Pump feels stiff or difficult to operate:
  • The internal piston may require lubrication. Consult the manufacturer's website for specific lubrication recommendations.
  • Ensure no foreign objects are obstructing the pump's barrel.

7. Specifications

8. Warranty & Support

For warranty information, product support, or additional inquiries, please visit the official Bell Sports website:

www.thebellgarage.com

Please retain your proof of purchase for any warranty claims.