OXFORD Anti-theft Helmet Lid Lock OX656 Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your OXFORD Anti-theft Helmet Lid Lock OX656. This innovative security device is designed to secure motorcycle helmets and clothing, offering a lightweight and versatile solution for riders.

The Lid Lock features a lightweight aluminum carabiner, a special T-Bar adapter for quick-release buckles, and a coiled cable for securing various items. Please read these instructions thoroughly before first use.

Figure 1: Overview of the OXFORD Lid Lock components, including the carabiner, coiled cable, and T-Bar adapter.

Setup: Setting Your Combination

The OXFORD Lid Lock uses a 4-digit combination. Follow these steps to set your personal combination:

1. Ensure the lock is set to the factory default combination, which is 0-0-0-0.
2. Locate the red arrow or reset button on the side of the lock mechanism.
3. With the lock open and set to 0-0-0-0, turn the red arrow 90 degrees clockwise until it clicks into place. This puts the lock in programming mode.
4. Set your desired 4-digit combination by rotating the number dials. Choose a memorable but secure combination.
5. Once your new combination is set, turn the red arrow back 90 degrees counter-clockwise to its original position. This will lock in your new combination.
6. Scramble the dials to test your new combination. Ensure it opens only with your chosen code.

Important: Remember your combination. There is no master key or override function if the combination is forgotten.

Figure 2: Visual guide for setting the combination on the OXFORD Lid Lock. The image illustrates aligning to '0000', rotating the red arrow, setting a new code, and returning the arrow to lock the new combination.

Operating Instructions

The OXFORD Lid Lock offers multiple ways to secure your helmet and other gear.

Securing a Helmet with D-Rings:

1. Open the carabiner by entering your combination and pressing the release button.
2. Thread the open carabiner through the D-rings of your helmet strap.
3. Attach the carabiner to a secure point on your motorcycle (e.g., frame, grab rail).
4. Close the carabiner and scramble the dials to lock it.

Figure 3: The carabiner mechanism of the Lid Lock being used to secure a helmet via its D-rings.

Securing a Helmet with a Quick-Release Buckle (using T-Bar):

1. Take the provided T-Bar adapter.
2. Insert the T-Bar through the quick-release buckle mechanism of your helmet strap. Ensure it passes through securely.
3. Open the carabiner of the Lid Lock.
4. Hook the carabiner through the hole at the end of the T-Bar.
5. Attach the carabiner to a secure point on your motorcycle.
6. Close the carabiner and scramble the dials to lock it.

Figure 4: A helmet secured to a motorcycle's handlebar using the Lid Lock and the T-Bar adapter for quick-release buckles.

Figure 5: The T-Bar adapter, designed for helmets with quick-release buckles.

Securing Clothing or Other Items (using Coiled Cable):

1. The coiled cable is integrated with the carabiner lock.
2. Open the carabiner.
3. Thread the coiled cable through the sleeves of your jacket, trousers, or other items you wish to secure.
4. Pass the end of the coiled cable (which is attached to the carabiner) around a secure point on your motorcycle.
5. Close the carabiner and scramble the dials to lock it.

Figure 6: The OXFORD Lid Lock, highlighting the 4-digit combination mechanism and the integrated coiled cable for securing clothing.

Maintenance

To ensure the longevity and proper function of your OXFORD Lid Lock, follow these simple maintenance guidelines:

• Cleaning: Wipe the lock body and cable with a damp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or internal mechanisms.
• Lubrication: Periodically apply a small amount of silicone-based lubricant to the moving parts of the carabiner and the combination dials to ensure smooth operation. Do not over-lubricate.
• Storage: Store the lock in a dry environment when not in use to prevent corrosion.
• Inspection: Regularly inspect the coiled cable and carabiner for any signs of wear, damage, or fraying. If significant damage is observed, discontinue use and consider replacement.

Troubleshooting

If you encounter issues with your OXFORD Lid Lock, refer to the following common problems and solutions:

• Lock will not open with the correct combination:
  • Ensure each number is precisely aligned with the indicator marks.
  • Try rotating the dials slightly back and forth to ensure they are not stuck between numbers.
  • Verify that you are using the correct combination. If you have recently reset it, ensure you are using the new code.
• Carabiner is stiff or difficult to open/close:
  • Apply a small amount of silicone lubricant to the hinge and locking mechanism.
  • Check for any debris or obstructions preventing smooth movement.
• Forgotten Combination:
  • Unfortunately, if the combination is forgotten, there is no way to reset it without knowing the original code. The lock is designed for security and does not have a master key or backdoor.
  • It is recommended to keep your combination in a secure, memorable location.

Specifications

Figure 7: Detailed dimensions of the T-Bar adapter.

Warranty Information

Specific warranty details for the OXFORD Anti-theft Helmet Lid Lock OX656 are not provided in this document. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact OXFORD directly through their official website or customer service channels.

Customer Support

If you require further assistance, have questions not covered in this manual, or need to report an issue, please contact OXFORD customer support. You can typically find contact information on the OXFORD official website (www.oxfordproducts.com) or on the product packaging.

When contacting support, please have your product model number (OX656) and any relevant purchase information ready.