Texecom KIT-1001 Ricochet Premier Elite 64W Wireless Alarm System User Manual

1. Product Overview

This manual provides essential information for the installation, operation, and maintenance of your Texecom KIT-1001 Ricochet Premier Elite 64W Wireless Alarm System. This system is designed to provide advanced security for your premises.

1.1 Key Features

• Up to 64 wireless zones, with 32 onboard wireless zones.
• Expandable to 64 wireless zones.
• 4 onboard hardwired zones.
• Integrated onboard keypad.
• Compatible with Texecom Connect System for enhanced functionality.
• Version 4.0 Firmware.

1.2 Package Contents

Verify that all components are present in the box:

• 1 x Premier Elite 64-W Control Panel
• 5 x Premier Proximity Tags
• 1 x Premier Elite LCDLP-W Keypad
• 3 x Capture P15-W PIR Detectors
• 1 x Premier Elite Micro Contact-W

Image 1.1: Texecom Capture P15-W PIR Detector. This image shows a white, rectangular passive infrared (PIR) motion detector with a circular, translucent lens in the center, designed for wireless security systems.

2. Setup and Installation

The Texecom KIT-1001 system is designed for professional hardwired installation. It is recommended that installation be performed by a qualified security professional to ensure optimal performance and compliance with local regulations.

2.1 Power Connection

1. Ensure the main power supply is disconnected before beginning any wiring.
2. Connect the control panel to a stable mains power source as per the wiring diagram provided in the full installation guide (not included in this manual).
3. Install the Lithium-ion battery cell (if supplied separately) into the designated compartment within the control panel.

2.2 Device Pairing (Ricochet Wireless Devices)

The Premier Elite 64-W control panel supports Ricochet wireless technology. Refer to the specific device manuals for detailed pairing instructions for the Capture P15-W PIR detectors and Premier Elite Micro Contact-W.

• Typically, devices are put into 'learn' mode and then activated to register with the control panel.
• Ensure devices are within the recommended wireless range of the control panel.

2.3 Keypad Installation

Mount the Premier Elite LCDLP-W keypad in an easily accessible location near an entry/exit point. Connect it to the control panel using the appropriate wiring as detailed in the full installation guide.

3. Operating Instructions

The Texecom alarm system can be operated via the keypad, proximity tags, or a compatible smartphone app.

3.1 Arming the System

1. Using the Keypad: Enter your user code followed by the 'ARM' button. The system will provide an exit delay countdown.
2. Using Proximity Tags: Present a Premier Proximity Tag to the designated reader on the keypad. The system will arm after the exit delay.
3. Using the App: Open the Texecom Connect app on your smartphone, select the desired arming mode (e.g., Full Arm, Part Arm), and confirm.

3.2 Disarming the System

1. Using the Keypad: Enter your user code. The system will disarm immediately.
2. Using Proximity Tags: Present a Premier Proximity Tag to the designated reader on the keypad. The system will disarm.
3. Using the App: Open the Texecom Connect app, select 'Disarm', and confirm.

3.3 Alarm Events

In the event of an alarm, the system will activate audible and visual alerts. If connected to a monitoring station, an alert will also be sent. Follow your pre-defined security protocols.

4. Maintenance

Regular maintenance ensures the longevity and reliability of your Texecom alarm system.

4.1 Battery Replacement

The system uses Lithium-ion battery cells. The control panel and wireless devices will indicate when their batteries are low. Replace batteries promptly with genuine Texecom replacements to maintain system integrity.

• For the control panel battery, consult a professional installer.
• For wireless device batteries (e.g., PIRs, contacts), refer to their individual manuals for replacement procedures.

4.2 Cleaning

Clean the surfaces of the control panel, keypad, and detectors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the components.

5. Troubleshooting

This section addresses common issues you might encounter with your alarm system.

5.1 False Alarms

• Cause: Incorrect sensor placement, environmental factors (e.g., pets, drafts), or low battery.
• Solution: Ensure PIRs are not facing heat sources or areas with frequent movement from pets. Check battery status of wireless devices. Consult your installer for sensor repositioning.

5.2 System Not Arming

• Cause: An open zone (e.g., door/window open), system fault, or incorrect user code.
• Solution: Check the keypad display for open zones and secure them. Verify your user code. If a system fault is indicated, contact technical support.

5.3 Communication Issues (App Control)

• Cause: Internet connectivity issues, app settings, or system communication module fault.
• Solution: Check your internet connection. Ensure the Texecom Connect app is updated. If issues persist, contact your installer or Texecom support.

6. Specifications

7. Warranty & Support

For warranty information, please refer to the documentation provided with your purchase or visit the official Texecom website. Texecom products typically come with a manufacturer's warranty covering defects in materials and workmanship.

7.1 Technical Support

If you encounter issues that cannot be resolved using the troubleshooting guide, please contact your professional installer or Texecom technical support. Contact details can usually be found on the Texecom website or in your product packaging.

• Online Resources: Visit the Texecom website for FAQs, software updates, and detailed product documentation.
• Professional Installer: Your installer is your primary point of contact for system-specific queries and service.