1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your EXIT Toys 8 Foot Round Pool Cover Dome. This transparent, multifunctional cover is designed to protect your outdoor frame pool from weather and debris, while also contributing to water warming.
Please read this manual thoroughly before assembly and use, and retain it for future reference.
Image 1.1: The EXIT Toys 8 Foot Round Pool Cover Dome, shown installed on an above-ground pool.
2. Safety Information
Your safety and the safety of others are paramount. This product is TUV-approved, ensuring it meets specific safety and quality standards. Adhere to all warnings and instructions to prevent injury or damage.
- Always supervise children when they are in or around the pool, even with the cover installed.
- Ensure the cover is properly secured when not in use to prevent accidental entry.
- Do not climb, stand, or walk on the pool cover dome.
- Keep all heat sources, open flames, and sharp objects away from the PVC material.
- In strong winds or severe weather conditions, it is recommended to secure the dome further or temporarily remove it to prevent damage.
- Assembly typically requires two adults.
3. Package Contents
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
- Transparent PVC Dome Cover
- Frame Poles and Connectors
- Hinge Mechanism
- Attachment Straps and Hardware
- Instruction Manual (this document)
4. Setup and Installation
This pool cover dome is designed for above-ground round frame pools with specific dimensions. Ensure your pool meets the following criteria:
- Pool Diameter: 94.5 to 100 inches (approximately 8 feet).
- Top Rail: Round, with a maximum thickness of 1.97 inches (5 cm).
- Legs: Round, with a maximum diameter of 1.57 inches (4 cm).
- Leg Count: Even number of legs.
Assembly Steps:
- Prepare the Area: Ensure the area around your pool is clear of obstructions.
- Assemble the Frame: Connect the frame poles according to the diagrams provided in the separate assembly guide. Ensure all connections are secure.
- Attach the Cover: Carefully spread the transparent PVC cover over the assembled frame. Ensure it is correctly oriented.
- Mount to Pool: Position the dome over your pool. Attach the hinge mechanism to the pool's top rail and legs using the provided hardware. Adapters may be included for various frame sizes.
- Secure the Dome: Use the attachment straps to firmly secure the dome to the pool frame. This ensures stability and prevents accidental lifting by wind.
Image 4.1: Diagram illustrating the compatible pool dimensions for the dome, including top rail and leg specifications.
Image 4.2: Detailed fit guide table for various pool frame types and dimensions.
5. Operating Instructions
The EXIT Toys Pool Cover Dome is designed for ease of use, allowing quick access to your pool while providing protection.
- Opening the Dome: To open the dome, unfasten the securing straps. Utilize the hinge mechanism to smoothly lift and retract the dome sections. The dome can be partially or fully opened.
- Closing the Dome: To close, reverse the opening process. Gently pull the dome sections back into place over the pool. Ensure all sections are properly aligned and then fasten the securing straps to keep the dome firmly closed.
- Benefits of Use:
- Water Warming: The transparent PVC material allows sunlight to penetrate, naturally heating the pool water for a more comfortable swimming experience.
- Debris Protection: The dome acts as a barrier, preventing leaves, dirt, insects, and other debris from entering the pool, reducing cleaning frequency.
- Weather Shield: Provides shelter from light rain and wind, extending your swimming season.
Image 5.1: Demonstrating how the dome can be opened to keep the pool clean and accessible.
Image 5.2: The pool dome in a partially open position, allowing access while still offering some protection.
Image 5.3: Children enjoying the pool under the dome, highlighting its ability to heat the water.
6. Maintenance
Proper maintenance will extend the lifespan of your pool cover dome.
- Cleaning: Clean the transparent PVC material with a mild detergent and water. Avoid abrasive cleaners or harsh chemicals that could damage the material. Rinse thoroughly with clean water.
- Protection: When the pool is not in use for extended periods, or during off-season, it is recommended to protect the dome from prolonged direct sunlight and extreme weather conditions. Consider disassembling and storing it in a cool, dry place if not needed.
- Inspection: Regularly inspect the frame, hinges, straps, and PVC cover for any signs of wear, damage, or corrosion. Address any issues promptly to maintain safety and functionality.
7. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dome does not fit pool correctly. | Pool dimensions do not match specifications; incorrect assembly of frame or attachment hardware. | Verify your pool's top rail and leg dimensions against the product specifications (refer to Section 4). Re-check assembly steps and ensure all parts are correctly installed. |
| Dome feels unstable or loose. | Securing straps are not tightened; hinge mechanism not properly installed; frame connections are loose. | Ensure all securing straps are tightly fastened. Check that the hinge mechanism is securely attached to the pool frame. Inspect all frame connections for tightness. |
| Water or debris still enters the pool. | Dome not fully closed or secured; gaps in the cover. | Ensure the dome is fully closed and all straps are fastened. While the dome significantly reduces debris, a perfect seal is not guaranteed. Check for any tears or damage in the PVC material. |
| Difficulty opening or closing the dome. | Hinge mechanism obstructed or stiff; frame misalignment. | Inspect the hinge mechanism for any obstructions. Ensure the frame is not bent or misaligned. Lubricate moving parts of the hinge if necessary with a suitable, non-damaging lubricant. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | EXIT Toys |
| Model Number | 30.80.08.00 |
| Size | 8'8" (Round) |
| Color | Transparent/Green |
| Material | Polyvinyl Chloride (PVC) |
| Product Dimensions | 104"L x 104"W |
| Shape | Round |
| Closure Type | Hook & Loop |
| Installation Type | Removable |
| Special Feature | Indoor (Note: This feature may refer to the ability to create an enclosed swimming environment, not necessarily for indoor pool use.) |
| Product Care Instructions | Clean with mild detergent, protect from sunlight and weather when not in use. |
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms and conditions may vary.
If you require technical assistance, have questions about parts, or need further support, please contact EXIT Toys customer service or your authorized dealer. Contact details can typically be found on the manufacturer's official website or your purchase receipt.
Online Resources: For additional tips, assembly videos, or FAQs, visit the official EXIT Toys website: www.exitttoys.com