Nerf Elite 2.0 Flipshots Flip-32 Blaster Instruction Manual

Introduction

The Nerf Elite 2.0 Flipshots Flip-32 blaster is designed for dynamic dart-blasting action. This innovative blaster features 32 barrels, with 16 facing forward and 16 facing backward, allowing for extended play without immediate reloading. Its unique flip mechanism enables rapid switching between sets of barrels, providing a tactical advantage during play. The blaster is hand-powered and does not require batteries.

Safety Information

WARNING: Do not aim at eyes or face. Use of eyewear is recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.

WARNING: CHOKING HAZARD - Small parts may be generated. Not for children under 3 years.

What's in the Box

• Nerf Elite 2.0 Flipshots Flip-32 Blaster
• 32 Official Nerf Elite 2.0 Foam Darts
• Instruction Manual

Figure 1: Contents of the Nerf Elite 2.0 Flipshots Flip-32 Blaster package, including the blaster and 32 darts.

Setup

1. Loading Darts

1. Locate the 32 dart barrels on the blaster. There are 16 barrels facing forward and 16 barrels facing backward.
2. Insert one Official Nerf Elite 2.0 foam dart into each barrel until it is securely seated. Ensure all 32 barrels are loaded for maximum firepower.

Figure 2: Darts loaded into the front-facing barrels of the blaster.

Figure 3: Official Nerf Elite 2.0 foam darts.

Operating Instructions

1. Priming the Blaster

The Nerf Elite 2.0 Flipshots Flip-32 blaster uses a lever-action priming mechanism. To prime the blaster, pull the handle located beneath the main barrel assembly all the way back until it clicks into place. This action prepares the blaster to fire darts.

Figure 4: Demonstrating the priming action of the blaster.

2. Firing Darts

• Single Dart Fire: Pull the trigger halfway to fire one dart from a front-facing barrel.
• Double Dart Fire: Pull the trigger all the way back to fire two darts simultaneously from two front-facing barrels.

3. Flipping Barrels for Extended Firepower

After firing the 16 front-facing darts, you can quickly access the remaining 16 darts by flipping the barrel assembly. To do this, pull the handle located on the side of the blaster. This action rotates the barrel assembly, bringing the previously rear-facing barrels to the front, ready for continued blasting.

Figure 5: The barrel flipping mechanism in motion.

Maintenance

To ensure optimal performance and longevity of your Nerf Elite 2.0 Flipshots Flip-32 Blaster, follow these simple maintenance guidelines:

• Cleaning: Wipe the blaster with a dry, soft cloth to remove dust and debris. Do not use water or cleaning solutions, as this may damage the internal mechanisms.
• Dart Care: Store darts in a clean, dry place away from direct sunlight or extreme temperatures to maintain their shape and performance. Do not bend or modify darts.
• Storage: When not in use, store the blaster in a cool, dry environment.

Troubleshooting

If you encounter any issues with your Nerf Elite 2.0 Flipshots Flip-32 Blaster, consider the following common solutions:

• Darts not firing:
  • Ensure the blaster is fully primed by pulling the priming handle all the way back until it clicks.
  • Check that darts are properly seated in the barrels.
  • Verify that you are using Official Nerf Elite 2.0 foam darts.
• Barrel assembly not flipping smoothly:
  • Ensure no foreign objects are obstructing the flipping mechanism.
  • Check for any visible damage to the barrel assembly or its connection points.
• Darts not flying straight or far:
  • Inspect darts for damage (e.g., bent tips, torn foam). Replace damaged darts with new Official Nerf darts.
  • Ensure the blaster is clean and free of debris that might affect dart trajectory.

If issues persist, please refer to the warranty and support information.

Specifications

Warranty and Support

For warranty information, product support, or to purchase replacement parts and darts, please visit the official NERF website or contact Hasbro customer service. Keep your proof of purchase for any warranty claims.

You can find more information and contact details on the NERF Store on Amazon.