Kastar NOCAR-0B-FNP40-U

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Kastar AC Wall Battery Charger Instruction Manual

Model: NOCAR-0B-FNP40-U

1. Introduction

This manual provides instructions for the safe and efficient use of your Kastar AC Wall Battery Charger. This charger is designed to power various camera batteries, including those compatible with Vivitar Vivicam and Praktica Luxmedia models. Please read this manual thoroughly before use and retain it for future reference.

Kastar AC Wall Battery Charger product packaging

Image: Kastar AC Wall Battery Charger in its retail packaging.

2. Safety Information

To ensure safe operation and prevent damage to the charger or injury, please observe the following precautions:

WARNING: To prevent fire or moisture damage, do not expose the charger to water or high humidity.
WARNING: Do not remove the cover or back plate of the charger. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
CAUTION: Use this charger only in dry locations. Avoid use in damp or wet environments.
Do not attempt to charge batteries that are not specified as compatible with this charger.
Keep the charger away from heat sources and direct sunlight.
Unplug the charger from the power outlet when not in use or during electrical storms.
Do not operate the charger with a damaged cord or plug.

3. Setup

Follow these steps to set up your Kastar AC Wall Battery Charger:

Unfold the AC Plug: The charger features a foldable flat AC plug for compact storage. Gently pull out the prongs until they are fully extended and locked into place.

Kastar AC Wall Battery Charger with extended plug

Image: The charger with its AC plug extended, ready for use.

Connect to Power: Plug the charger directly into a standard AC wall outlet (100-240V, 50/60Hz).

Kastar AC Wall Battery Charger with folded plug

Image: The charger with its AC plug folded for compact storage.

4. Operating Instructions

Follow these steps to charge your camera battery:

Insert Battery: Carefully insert the compatible battery into the charging slot of the charger. Ensure the battery is oriented correctly according to the polarity indicators on the charger.
Charging Indicator: Once the battery is correctly inserted and the charger is plugged into a power outlet, the LED indicator light will turn red, signifying that the battery is actively charging.
Full Charge Indicator: When the battery is fully charged, the LED indicator light will turn green.
Remove Battery: Once charging is complete (green light), remove the battery from the charger.
Unplug Charger: Unplug the charger from the wall outlet when not in use.

Demonstration Video

Video: This video demonstrates the features and usage of the Kastar AC Wall Battery Charger, including its foldable plug design and the battery charging process. It shows how to plug in the charger and insert a battery for charging.

5. Maintenance

Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
Storage: When not in use, store the charger in a cool, dry place, away from direct sunlight and moisture. Fold the AC plug for compact storage.
Inspection: Periodically inspect the charger and its power prongs for any signs of damage. If damage is observed, discontinue use and contact customer support.

6. Troubleshooting

Problem	Possible Cause	Solution
Charger LED does not light up.	No power from outlet. Charger not properly plugged in. Battery not inserted correctly. Battery is fully charged (green light).	Check the power outlet with another device. Ensure the charger is firmly plugged into the outlet. Re-insert the battery, ensuring correct orientation. If the light is green, the battery is already charged.
Battery does not charge (LED remains green or off).	Battery is not compatible. Battery is defective. Charger is defective.	Verify battery compatibility with the list in this manual. Try charging a different, known-good compatible battery. If multiple compatible batteries fail to charge, the charger may be faulty. Contact customer support.

7. Specifications

Model Number: NOCAR-0B-FNP40-U
Input: AC 100-240V, 50/60Hz
Output: DC 4.2V, 600mA
Dimensions: 2 x 1.5 x 3 inches (approximately)
Item Weight: 2.4 ounces (approximately)
Plug Type: Foldable flat AC pin (US standard)
LED Indicator: Red (Charging), Green (Standby/Full Charge)
Safety Certification: CE

8. Compatibility

This Kastar AC Wall Battery Charger is compatible with the following battery and camera models:

Compatible Battery Models:

Pentax D-Li8, D-Li85
Fujifilm NP-40, NP-40N
Panasonic DMW-BCB7, CGA-S004, CGA-S004A, CGA-S004A/1B, CGA-S004E/1B
Kodak KLIC-7005
Benq DLI-102
Samsung SLB-0737, SLB-0837
Sanyo NP-40
HP R742

Compatible Camera Models:

Braun: D808
Easypix: DVC5308, DVC5308HD, S530, SDV1200, TS530, V600, VX600, VX6330, VX1400, VX1400HD
JAY-tech: JayCam i6550, Z630
Jenoptik: EasyShot JD 5.3z3, EasyShot JD 7.3z3
Medion: Life S47000, MD86064, Life P42010, Life P42012, MD85866, MD85416
Polaroid: MH-45503, PR-130DG
Prosio: SlimNeo XT1600, Strato DC2007
Technika: SH-Z735
Revue: DC 600 Slim, DC 5600 Slim
Rollei: DA10, DB60, DP60, DX63, DX68, Tribute DT6
Vivitar: DVR-560G, Vivicam 3660, Vivicam 7388, Vivicam 7388S, Vivicam 7500i
Praktica: Luxmedia 12-03, 6015, 8503, 8403, 8303, LB-5030, LM 8403, LM 8503, LM 8303, LM 7403, LM 7303, LM 7203, DCZ 10.3, 12-HD

9. Warranty and Support

For warranty information, please refer to the documentation included with your product or visit the official Kastar website. If you encounter any issues or require technical assistance, please contact Kastar customer support.

Kastar Customer Support: Refer to the contact information provided on the product packaging or the official Kastar website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.