Introduction
The Legami Singing in the Shower Bluetooth Speaker is designed for an enjoyable audio experience in wet environments. This water-resistant speaker features an integrated microphone for hands-free calls and a suction cup for easy mounting.
Dance and sing without worry, as this speaker is built to withstand splashes, making it perfect for use in the shower or by the bathtub. Its compact design and Bluetooth connectivity ensure convenience and portability.

Image: Front view of the Legami Singing in the Shower Bluetooth Speaker, featuring a vibrant Flora theme pattern on a dark background with a pink base and control buttons. The speaker has a suction cup base.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. A USB charging cable is included.
- Connect the small end of the USB cable to the charging port on the speaker.
- Connect the larger end of the USB cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light will illuminate. Charging time is approximately 1 hour.
- The indicator light will change or turn off once charging is complete.
2. Bluetooth Pairing
Pair the speaker with your Bluetooth-enabled device (smartphone, tablet, etc.) to play audio.
- Ensure the speaker is charged and powered off.
- Press and hold the Power button on the speaker until you hear an audible prompt or see an indicator light flashing, indicating it's in pairing mode.
- On your device, go to Bluetooth settings and enable Bluetooth.
- Search for available devices. The speaker should appear as "Legami Singing in the Shower" or similar.
- Select the speaker from the list to connect. Once connected, you will hear a confirmation sound.
3. Mounting the Speaker
The speaker comes with a suction cup for easy attachment to smooth, non-porous surfaces.
- Ensure the surface (e.g., shower wall, bathtub, tile) is clean and dry.
- Press the suction cup firmly against the desired surface until it adheres securely.
- Verify the speaker is stable before releasing it.

Image: Side view of the Legami Singing in the Shower Bluetooth Speaker with water splashing around its base, highlighting its water-resistant feature. The speaker's control panel is visible.
Operating Instructions
Power On/Off
- To power on, press and hold the Power button (usually marked with a circle and vertical line) until the indicator light illuminates.
- To power off, press and hold the Power button again until the indicator light turns off.
Music Playback
- Once paired, open your music application on your device and start playback.
- Press the Play/Pause button (usually marked with a triangle or two vertical bars) to play or pause music.
- Press the Next Track button (usually marked with two triangles and a vertical line pointing right) to skip to the next song.
- Press the Previous Track button (usually marked with two triangles and a vertical line pointing left) to go to the beginning of the current song or the previous song.
- Adjust volume directly from your connected device.
Hands-Free Calling
The integrated microphone allows you to answer and make calls directly through the speaker.
- When a call comes in, the speaker will ring. Press the Play/Pause button to answer the call.
- To end a call, press the Play/Pause button again.
- To reject an incoming call, press and hold the Play/Pause button.
The speaker provides up to 2 hours of playback time on a full charge.
Maintenance
Cleaning
- Wipe the speaker with a soft, damp cloth.
- Do not use abrasive cleaners or solvents, as they may damage the surface.
- Ensure the charging port cover is securely closed when cleaning or using in wet environments.
Storage
- Store the speaker in a cool, dry place when not in use.
- Avoid exposing the speaker to extreme temperatures or direct sunlight for prolonged periods.
Troubleshooting
Speaker does not power on:
- Ensure the speaker is fully charged. Connect it to a power source and allow it to charge for at least 15 minutes before attempting to power on again.
Cannot pair with device:
- Ensure the speaker is in pairing mode (indicator light flashing).
- Make sure Bluetooth is enabled on your device and it is within range (typically 10 meters or 33 feet).
- Try turning both the speaker and your device off and on again.
- If previously paired, try "forgetting" or "unpairing" the speaker from your device's Bluetooth list and then re-pairing.
No sound or low volume:
- Ensure the volume on both the speaker and your connected device is turned up.
- Check if the speaker is properly paired and connected to your device.
- Ensure the audio source on your device is playing.
Call quality issues:
- Ensure you are within close proximity to the speaker when speaking.
- Check for any obstructions between the speaker and your device that might interfere with the Bluetooth signal.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SHOW0007 |
| Brand | LEGAMI |
| Connectivity Technology | Bluetooth, USB |
| Compatible Devices | Smartphone, Tablet |
| Special Features | Waterproof |
| Material | ABS and Silicone |
| Product Dimensions | 8.5D x 8.5W x 5H centimeters |
| Battery Life | Up to 2 hours |
| Charging Time | 1 hour |
| Speaker Maximum Output Power | 6 Watts |
| Audio Output Mode | Stereo |
| Color | Flora |
Warranty and Support
For warranty information and technical support, please refer to the official LEGAMI website or contact their customer service directly. Keep your purchase receipt for warranty claims.
For further assistance, you may visit the LEGAMI Brand Store on Amazon.





