1. Introduction
Thank you for choosing the TUSHY Classic 3.0 Bidet Attachment. This non-electric bidet is designed to provide a refreshing and hygienic experience with easy installation and intuitive controls. This manual contains important information regarding the installation, operation, maintenance, and troubleshooting of your new bidet attachment. Please read it thoroughly before installation and retain it for future reference.
2. Safety Information
- Ensure all connections are secure to prevent leaks.
- Do not use excessive force when tightening connections. Hand-tighten where specified, and use a wrench only when necessary and with caution.
- This product is designed for use with standard potable water supplies.
- Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
- Keep out of reach of children during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- TUSHY Classic 3.0 Bidet Attachment
- Tank Adapter and Flexible TUSHY Hose
- TUSHY Classic 3.0 Owner's Manual (this document)
Image: All components included in the TUSHY Classic 3.0 package.
4. Installation Guide
The TUSHY Classic 3.0 is designed for quick and easy installation, typically taking 8.5 minutes or less. No electricity or special tools are required beyond a standard adjustable wrench.
Pre-Installation Steps:
- Turn off the water supply valve to your toilet.
- Flush the toilet to drain the tank. Hold the handle down to ensure as much water as possible is removed.
- Place a towel or small bucket under the toilet tank connection to catch any residual water.
Installation Steps:
- Remove Your Toilet Seat: Unscrew the bolts holding your existing toilet seat to the toilet bowl. Set the seat and hardware aside.
Image: Step 1 - Unscrewing the toilet seat.
- Position the Bidet Attachment: Place the TUSHY Classic 3.0 attachment on the toilet bowl, aligning its adjustable plates with the bolt holes. Ensure the nozzle is centered and the unit is flush with the rim of the toilet bowl.
Image: Step 2 - Positioning the bidet attachment.
- Reattach Toilet Seat: Place your toilet seat back over the TUSHY attachment and secure it with the original bolts. Tighten until the seat is stable, but do not overtighten.
Image: The TUSHY Classic 3.0 Bidet Attachment installed under a toilet seat.
- Connect Water Supply:
- Disconnect the existing water supply hose from the toilet tank.
- Connect the TUSHY tank adapter to the toilet tank's fill valve. Hand-tighten first, then use a wrench for a quarter turn to secure.
- Connect the original toilet supply hose to the bottom of the TUSHY tank adapter.
- Connect the flexible TUSHY hose from the side of the tank adapter to the water inlet on the bidet attachment.
Image: Step 3 - Connecting the water supply to the bidet attachment.
- Test for Leaks: Slowly turn the toilet's water supply valve back on. Check all connections for leaks. If leaks occur, tighten the connections slightly until they stop.
5. Operation
The TUSHY Classic 3.0 features intuitive controls for a personalized cleaning experience.
Image: Key features of the TUSHY Classic 3.0, including the control knob and nozzle.
Water Pressure Control:
The main knob on the side of the bidet attachment controls the water pressure. Rotate the knob to adjust the intensity of the water spray from a gentle rinse to a strong, steady wash. The smooth progression allows for precise control to find your preferred setting.
Precision Nozzle Adjuster:
A small lever or dial near the main knob allows you to adjust the spray angle of the nozzle. This feature provides a wider range of cleaning and targeted control for optimal hygiene.
Self-Cleaning Nozzle (Patented SmartSpray™):
The TUSHY Classic 3.0 is equipped with a patented SmartSpray™ self-cleaning nozzle. This nozzle automatically cleans itself after every use and retracts when not in operation, ensuring hygiene and preventing grime buildup.
6. Maintenance
Regular cleaning will ensure the longevity and hygienic performance of your TUSHY Classic 3.0 bidet attachment.
- General Cleaning: Wipe down the exterior of the bidet attachment with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads, as these can damage the finish.
- Nozzle Cleaning: The SmartSpray™ nozzle is self-cleaning. If additional cleaning is desired, you can manually extend the nozzle (refer to operation instructions) and gently wipe it with a soft cloth and mild soap. Ensure the nozzle retracts fully after cleaning.
- Schmutz Shield™: The patented Schmutz Shield™ design helps keep your toilet clean and is easy to wipe down.
7. Troubleshooting
If you encounter any issues with your TUSHY Classic 3.0, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from connections. | Loose connections or improperly seated washers. | Ensure all connections are hand-tightened, then use a wrench for a slight additional turn if necessary. Check that washers are correctly placed. |
| No water spray or weak spray. | Water supply valve is off, bidet control knob is off, or nozzle is obstructed. | Ensure the toilet's water supply valve is fully open. Turn the bidet control knob to an active spray setting. Check the nozzle for any blockages and clean if necessary. |
| Toilet seat does not sit flat. | Bidet attachment not properly aligned or toilet seat bolts not tightened evenly. | Re-align the bidet attachment and toilet seat. Ensure bolts are tightened evenly. Some toilet seat designs may have a slight gap, which is normal. |
If you continue to experience issues, please contact TUSHY customer support.
8. Specifications
- Model: Classic 3.0
- Dimensions: 16.5 x 8 x 0.99 inches
- Weight: 2.29 pounds
- Material: ABS plastic, POM, Stainless Steel, Vinyl, Fiberglass Reinforced Nylon, Brass, Ceramic
- Color (Current Variant): Platinum Knob
- Style (Current Variant): Cool Water
- Power Source: Non-electric (uses existing water pressure)
- Mounting Type: Under-seat attachment
- Special Features: Patented SmartSpray™ Nozzle, Patented Schmutz Shield™, Adjustable Water Pressure, Precision Nozzle Adjuster, Lead Free components.
9. Warranty and Support
TUSHY products are designed for durability and performance. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official TUSHY website.
For any questions, installation assistance, or troubleshooting not covered in this manual, please contact TUSHY customer support:
- Online Support: TUSHY Support Center
- Contact Options: Chat, Call, or Email support are available.
Image: TUSHY Classic 3.0 Bidet Attachment.
